Machinery International Corporation 20 Commerce Drive
North Branford, CT 06471 USA
Tel: +1 203-484-0400
Fax: +1 203-484-4499
sales@machyintl.com
Spanish Flag French Flag German Flag Chinese Flag

72" (1828mm) x 10" (254mm), CINCINNATI, 60,000# (27.22 MT), DRIVEN LOOP (13819)   Our stock number: 13819

72 (1828mm) x 10 (254mm), CINCINNATI, 60,000# (27.22 MT), DRIVEN LOOP (13819)

Click on picture below for larger version
72 (1828mm) x 10 (254mm), CINCINNATI, 60,000# (27.22 MT), DRIVEN LOOP (13819)72 (1828mm) x 10 (254mm), CINCINNATI, 60,000# (27.22 MT), DRIVEN LOOP (13819)72 (1828mm) x 10 (254mm), CINCINNATI, 60,000# (27.22 MT), DRIVEN LOOP (13819)72 (1828mm) x 10 (254mm), CINCINNATI, 60,000# (27.22 MT), DRIVEN LOOP (13819)
72 (1828mm) x 10 (254mm), CINCINNATI, 60,000# (27.22 MT), DRIVEN LOOP (13819)72 (1828mm) x 10 (254mm), CINCINNATI, 60,000# (27.22 MT), DRIVEN LOOP (13819)72 (1828mm) x 10 (254mm), CINCINNATI, 60,000# (27.22 MT), DRIVEN LOOP (13819)72 (1828mm) x 10 (254mm), CINCINNATI, 60,000# (27.22 MT), DRIVEN LOOP (13819)


MACHINE #13819

SPECIFICATIONS:

Manufacturer:                  Cincinnati
Materials:                     HRS, CRS, Galv.
Coil Width Range:              12" - 72" (305mm - 1828mm)
Thickness Range:               0.024" - 0.375" (0.6mm - 9.5mm)
Max. Shear:                    45,000 PSI
Max. Yield:                    45,000 PSI
Max. Coil Weight:              60,000# (27.2 MT)
Coil I.D. (Entry):             20" - 24" (508mm - 610mm)
Coil I.D. (Exit):              20" & 24" (508mm & 610mm)
Max. Coil O.D.:                72" (1828mm)
Line Direction:                Left to Right
Mode of Operation:             Pull-thru/ Slitter Assist 
Approx. Line Speeds:           100/200/300 FPM @ 24" Dia. Bare Drum Speed
Required Floor Space:          50' (15.2m) x 90' (27.5m) approx.
 
Consisting of the following:
 
-Entry Turnstile:
  Three (3) arms x 60,000# (27.2 MT) per arm
  Powered Rotation
  Slotted for C-Hooks
 
-Entry Coil Car:
  Mast Type
  Floor Mounted
  Self-contained Hydraulic Unit
  Powered Lift and Traverse
  Cable Reel

-Uncoiler:
  Single Mandrel Type 
  Powered Expansion 
  Hold-down with Powered Snubber Roll 
  Wichita Water Cooled Brake with Cooler
  Slide Base 
  Feed-up Drive 

-Entry Unit:
  Extending Blade Type Peeler
  Entry Pass-line Roll
  Manual Side Guides
  Powered Entry Pinch Rolls
  Crop Shear- Down-cut Type
  Carry-over Table
 
-Two (2) Slitter Heads:
  Crane Removable Type
  10" (254mm) Dia. Arbors 
  Powered Outboard Retraction
  Powered Top Arbor Adjust
  "Over the Arbor" design to slit 36" (915mm) through 72" (1828mm) widths

-Stationary Slitter Drive Base:
  75 HP DC Motor (650/1950 RPM)
  H & S Speed Reducer (27.43:1 Ratio)
  Powered Head Lock

-Pit Section:
  Mounted to Tension Stand
  Entry Pass-line Roll
  Carry-over Table         

-Tension Stand: Coil Pro, New in 2000
  Drag Type
  Clam Shell Opening
  Separator Arm on Slide-out Frame
  Internal Deflector Rolls
  Exit Crop Shear- Down-cut Type
  Recoiler Feed Table

-Two (2) Scrap Winders:
  Automatic Scrap Dump
  Level Wind 
 
-Recoiler:
  Chicago Recoiler Drum, New in 2008
  20" (508mm) Dia. Drum
  Hydraulic Expansion and Gripper
  Hydraulic Push-off  
  Internal Gear Reduction: approx. 50:1
  100 HP DC Motor (650/1950 RPM)
  Drive-all Reducer with three (3) speeds
    Ratios - 1:1, 1.562:1 and 3:1
  Bolt-on Risers for 24" ID 
 
-Overarm Separator Assembly:
  Floor Mounted
  Banding Assist Arm
 
-Exit Coil Car:
  Mast Type
  Floor Mounted
  Self-contained Hydraulic Unit
  Powered Lift and Traverse
  Narrow Coil Retaining Tracks
  Cable Reel
 
-Entry Turnstile:
  Two (2) arms x 60,000# (27.2 MT) per arm
  Powered Rotation
  Powered Push-off
  Slotted for C-Hooks
 
-Electrical Controls: New in 2006
  Main Operators Control Panel with Touch Screen Control
  AC/DC Control Cabinets
  Eurotherm 590+ DC Drives
 
-Hydraulic System:
 
-Tooling: Shimless
  Multiple sets of Tooling
  Knives
  1" (25mm) Knives new in 2019 (never used)
  Steel Spacers
  Rubbers
  Separator Tooling

-New AC/DC Controls were added in 2006 at a cost of around $125,000.

-New Chicago Recoiler Drum was added in 2008 at a cost of around $150,000.

-Line is Installed

 ** CATALOG SPECIFICATIONS NOT VERIFIED BY SELLER **

 ** SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER **

 ** SPECIFICATIONS SUBJECT TO REVISIONS **

 ** PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE **



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Country:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

 |  Machinery International Corporation  |  Contact Us  |  Email Sales Department  |  203.484.0400  | 

RETURN to complete inventory display       RETURN to our home page