Machinery International Corporation 20 Commerce Drive
North Branford, CT 06471 USA
Tel: +1 203-484-0400
Fax: +1 203-484-4499
sales@machyintl.com
Spanish Flag French Flag German Flag Chinese Flag

54" (1371mm) x 9" (228mm), LOOPCO, 40,000 Lbs, 0.010"-.250" MILD STEEL (13793)   Our stock number: 13793

54 (1371mm) x 9 (228mm), LOOPCO, 40,000 Lbs, 0.010 -.250 MILD STEEL (13793)

Click on picture below for larger version
54 (1371mm) x 9 (228mm), LOOPCO, 40,000 Lbs, 0.010 -.250 MILD STEEL (13793)54 (1371mm) x 9 (228mm), LOOPCO, 40,000 Lbs, 0.010 -.250 MILD STEEL (13793)54 (1371mm) x 9 (228mm), LOOPCO, 40,000 Lbs, 0.010 -.250 MILD STEEL (13793)54 (1371mm) x 9 (228mm), LOOPCO, 40,000 Lbs, 0.010 -.250 MILD STEEL (13793)
54 (1371mm) x 9 (228mm), LOOPCO, 40,000 Lbs, 0.010 -.250 MILD STEEL (13793)54 (1371mm) x 9 (228mm), LOOPCO, 40,000 Lbs, 0.010 -.250 MILD STEEL (13793)54 (1371mm) x 9 (228mm), LOOPCO, 40,000 Lbs, 0.010 -.250 MILD STEEL (13793)54 (1371mm) x 9 (228mm), LOOPCO, 40,000 Lbs, 0.010 -.250 MILD STEEL (13793)


MACHINE 13793

 

MANUFACTURER: LOOPCO


Capacity: 0.010" - 0.250" Mild Steel
Coil Weight: 40,000#
Line Direction: Right to Left

Consisting of:

-Entry Coil Car: Revolvator
  40,000# Capacity
  60" wide Bed
  72" O.D. Capacity 
  (2) - 5" bore hydraulic lift cylinders
  Lift: Approx. 16"
  Self-contained hydraulics
    3 HP AC motor
  Each axle individually driven by hyd. motors
  Pushbutton control
  Approx. 12" from floor to bottom of "V" cradle
  Removable 5" high riser on bed
  Overall size: 90" L x 64" W x 89" High

-Uncoiler:
  20" - 24" I.D.
  Hydraulic Expansion
  Pumpkin Tooth Mandrel
  54.5" Face Mandrel
  Powered Holddown Roll w/Rubber Covered Roll
  AC Motor Threading Drive w/Air Clutch
  Sliding Base
  Wichita Water Cooled Brake
  Water Cooler for Brake
  Passline: 40" from Floor to Center of Mandrel
  Overall Size: 150" L x 74" W x 93" High

-Entry Unit:
  Threading Table
  Pinch Rolls, 8" Dia. x 56.5" Face Rolls, Idler Type
  Side Guides, Manual Adj.
  Passline: 47"
  Overall Size: 84" L x 50" W x 75" High

-Crop Shear:
  58" Long Blade
  Hydra-Mechanical Upcut Type
  10" Bore Hydraulic Cylinder
  Entry Passline Roll
  Spring Loaded Holddown
  Passline: 49"
  Overall Size: 109" L x 35" W x 81" High

-(2) Slitter Heads:
  Crane Type Removable Heads
  Single Eccentric Arbor Adjustment
  (1) - 9" Dia. x 55" Face Arbors
     Entry Table
  (1) - 6" Dia. x 55" Face Arbors
     Entry Side Guides, Manual Adj.
     Entry Passline Rolls, 4" Dia. x 59.75" Long
  75 HP DC Motor, 500/2000 RPM, 500 V, w/Blower
  30 HP AC Motor Threading Drive, 1760 RPM, 230/460 V
  Alten Reducer w/1.837:1 Ratio
  Overall Size: 9" Head: 128" L x 57" W x 81" High, 15,000 Lbs.
                6" Head: 122" L x 50" W x 69" High, 10,000 Lbs.
                Drive: 150" L x 46" W x 47" High, 7,500 Lbs.

-(2) Scrap Winders:
  Approx. 25" W x 26" Dia. Scrap Ball Capacity
  Hydraulic Motor Driven
  Self-Contained Hydraulic Power Unit
    15 HP AC Motor, 1760 RPM, 230/460V
  Overall Size: 84" L x 52" W x 49" High (Each Winder)

-Pit Cross Over Table:

-Tension Stand: Stamco
  Clam Shell Design 
  Hydraulic Cylinder Open / Close 
  Entry Separator Tooling Bar 
    (Not attached to Frame) 
  Exit Passline Rolls - Rubber Covered 
     Top Roll - 66" Face x 14" Dia.
     Bottom Roll - 62" Face x 6" Dia., Driven for Threading
       by Hyd. Motor
  (2) Sets of New Pressure Boards 
    (Less Felt/Carpet Covering) 
  Air Bag Included
  Machine No. 4461 
  Overall Size: 106" L x 39" W x 53" High

-Free Standing Overarm Separator:
  Deflector Roll
  Threading Table to Recoiler

-Recoiler:
  16" Dia. x 58" Face Drum
  20" Dia. Bolt On Pad
  22" Dia. x 57" Face Spare Drum
  Hydraulic Clamp and Expansion
  12" Dia. Main Shaft
  Hydraulic Pushoff
  Lufkin (2) Speed Gear Box w/10.6:1 and 31.7:1 Ratios
  200 HP DC Motor, 500/2000 RPM, 500 V w/Blower
  Air Operated Holding Brake
  Passline: 40" from Floor to Center of Drum
  Overall Size: 180" L x 102" W x 92" High

-Hydraulic Power Unit:

-Electrical Panel: Eurotherm DC Drive:

-Misc. Tooling Included.

-Removed and in Storage

**Temporary Specifications Subject to Revisions**

**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**


Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Country:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

 |  Machinery International Corporation  |  Contact Us  |  Email Sales Department  |  203.484.0400  | 

RETURN to complete inventory display       RETURN to our home page