Machinery International Corporation 20 Commerce Drive
North Branford, CT 06471 USA
Tel: +1 203-484-0400
Fax: +1 203-484-4499
sales@machyintl.com
Spanish Flag French Flag German Flag Chinese Flag

8" (203mm) x 8" (203mm), FENN, 2-HI REVERSING SLAB/COIL MILL w/AGC (13729)   Our stock number: 13729

8 (203mm) x 8 (203mm), FENN, 2-HI REVERSING SLAB/COIL MILL w/AGC (13729)

Click on picture below for larger version
8 (203mm) x 8 (203mm), FENN, 2-HI REVERSING SLAB/COIL MILL w/AGC (13729)8 (203mm) x 8 (203mm), FENN, 2-HI REVERSING SLAB/COIL MILL w/AGC (13729)8 (203mm) x 8 (203mm), FENN, 2-HI REVERSING SLAB/COIL MILL w/AGC (13729)8 (203mm) x 8 (203mm), FENN, 2-HI REVERSING SLAB/COIL MILL w/AGC (13729)
8 (203mm) x 8 (203mm), FENN, 2-HI REVERSING SLAB/COIL MILL w/AGC (13729)8 (203mm) x 8 (203mm), FENN, 2-HI REVERSING SLAB/COIL MILL w/AGC (13729)8 (203mm) x 8 (203mm), FENN, 2-HI REVERSING SLAB/COIL MILL w/AGC (13729)8 (203mm) x 8 (203mm), FENN, 2-HI REVERSING SLAB/COIL MILL w/AGC (13729)


MACHINE# 13729

SPECIFICATIONS:

MANUFACTURER: FENN MANUFACTURING CO. (U.S.A.)

TYPE: HIGHLY VERSATILE 2-HI REVERSING MILL THAT CAN EITHER HOT ROLL INGOTS UP

TO 2" (50mm) THICK OR COLD ROLL STRIP IN COILS DOWN TO .050" (1.27mm) USING

TWO DIFFERENT DIAMETER SETS OF ROLLS.

THE FOLLOWING  SPECIFICATIONS ARE BASED ON ALUMINUM AND WOULD NEED TO BE

ADJUSTED FOR OTHER ALLOYS.

PRODUCT: (A) HOT ROLL INGOT TO SLAB OR COIL OR (B) COLD ROLL COIL TO COIL

APPLICATIONS: MULTIPURPOSE MILL FOR BOTH BREAKDOWN AND FINISHING. IDEAL FOR

LABORATORY, UNIVERSITY, AND RESEARCH FACILITIES OF ALL TYPES.

CAPACITY (AS USED ON ALUMINUM):
 MAX. ENTRY THICKNESS:
 - SLABS 2" (50mm)
 - COILS 0.054" (1.37mm)
 WIDTHS:
 - SLABS UP TO 8" (203mm)
 - COILS 3"- 6" (76mm - 152mm)
 MIN. FINISH (AS USED): 0.050" (1.27mm)

SPEED: 50 - 1200 FPM (15 - 365 M/MIN)

ROLL SIZES:
 BREAKDOWN (SLABS): 7 7/8" (200mm) DIA. x 8" (203mm) FACE WIDTH
 FINISH (COILS): 5 7/8" (150mm) DIA. x 8" (203mm) FACE WIDTH

TYPE OF BEARINGS: ROLLER

USES EITHER COLD OR INTERNALLY HEATED ROLLS (UP TO 250 DEG. F (121 DEG. C)
ROLL MATERIAL: 52100/H37 FORGED STEEL
HARDNESS: FACE 60-65 RC

ROLL SEPARATION FORCE: MAX. 50,000 LBS. (22,680 KG) PER SIDE
TOTAL ROLL SEPARATION FORCE: 100,000 LBS. (45,360 KG)

MAIN DRIVE MOTOR: 125 HP TOP AND BOTTOM WITH HORSBURGH & SCOTT HERRINGBONE

GEAR REDUCER, 125 HP RATING, INPUT RPM 400, RATIO 2.793 AND 5.156).
EACH ROLL HAS ITS OWN INDEPENDENT MOTOR.

TYPE OF SCREWDOWNS: HYDRAULIC

TYPE OF THICKNESS GAUGES: VOLLMER (BOTH SIDES OF MILL)

HOT ROLLING: FOR BREAKDOWN OF HOT SLABS USING INTERNALLY HEATED ROLLS.
COLD ROLLING: FOR INTERMEDIATE SLAB ROLLING AND COIL TO COIL FINISH ROLLING.

WINDERS:
 QUANTITY: 2
 I.D.: 16" (406mm) HYDRAULIC EXPANSION
 MAX. COIL O.D.: 42" (1066mm)
 DRIVE MOTOR: 40 HP, 550/2000 RPM, 500 VOLT.
 WINDER TENSION: 3.8 ksi
 HYDRAULIC COIL PUSHOFF
 PAPER WINDER

PAYOFF WITH 10HP MOTOR

ROLL RACK FOR SPARE ROLLS (APPROXIMATELY 20)

COMPLETE ELECTRICS

FUME EXHAUST SYSTEM WITH SMOG HOG AIR CLEANER MODEL SH-20-PE-XB

TENSION STAND

INGOT FEED WITH SIDE GUIDES

INGOT FURNACE:
 MANUFACTURER: L&L SPECIAL FURNACE CO.
 PORTABLE
 ELECTRIC: SINGLE PHASE
 MODEL No.: XL126-F464-47
 SERIAL No.: K189LN

COST OF MILL NEW OVER $1.1 MILLION USD

*** SPECIFICATIONS SUBJECT TO REVISIONS **

 ** SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER **

 ** PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE **



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Country:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

 |  Machinery International Corporation  |  Contact Us  |  Email Sales Department  |  203.484.0400  | 

RETURN to complete inventory display       RETURN to our home page