Machinery International Corporation 20 Commerce Drive
North Branford, CT 06471 USA
Tel: +1 203-484-0400
Fax: +1 203-484-4499
sales@machyintl.com
Spanish Flag French Flag German Flag Chinese Flag

LEWIS, AUTOMATED ULTRASONIC PARTS WASHING LINE, FOR METALWORKING PARTS (13199)   Our stock number: 13199

LEWIS, AUTOMATED ULTRASONIC PARTS WASHING LINE, FOR METALWORKING PARTS (13199)

Click on picture below for larger version
LEWIS, AUTOMATED ULTRASONIC PARTS WASHING LINE, FOR METALWORKING PARTS (13199)LEWIS, AUTOMATED ULTRASONIC PARTS WASHING LINE, FOR METALWORKING PARTS (13199)LEWIS, AUTOMATED ULTRASONIC PARTS WASHING LINE, FOR METALWORKING PARTS (13199)LEWIS, AUTOMATED ULTRASONIC PARTS WASHING LINE, FOR METALWORKING PARTS (13199)
LEWIS, AUTOMATED ULTRASONIC PARTS WASHING LINE, FOR METALWORKING PARTS (13199)LEWIS, AUTOMATED ULTRASONIC PARTS WASHING LINE, FOR METALWORKING PARTS (13199)LEWIS, AUTOMATED ULTRASONIC PARTS WASHING LINE, FOR METALWORKING PARTS (13199)LEWIS, AUTOMATED ULTRASONIC PARTS WASHING LINE, FOR METALWORKING PARTS (13199)


MACHINE# 13199

MANUFACTURER:  LEWIS CORPORATION (U.S.A.)

TYPE:  AUTOMATED WATER BASED ULTRASONIC CLEANING SYSTEM FOR METALWORKING

PARTS IN SPECIAL TRANSPORTABLE BASKETS.

THE LINE CONSISTS OF:
- HEATED SOAK TANK
- HEATED ULTRASONIC WASH TANK
- HEATED IMMERSION RINSE TANK
- HEATED DEIONIZED RINSE TANK
- LOAD WORK STATION
- INPUT CONVEYOR WITH SPECIALLY DESIGNED BASKETS
- TEXAS INSTRUMENTS MODEL 520 C PROGRAMMABLE CONTROLLER
- ALLEN BRADLEY 800 MR OPERATOR CONTROLS

PREVIOUS USE:  THERMOSTAT PARTS BUT OTHER POSSIBLE APPLICATIONS INCLUDE

EYEGLASS FRAMES, PISTON RINGS, AVIONICS MODULES, MEMORY DISCS, ARMATURES,

AND MANY OTHERS.

IN-LINE BASKET TRANSPORT SYSTEM FROM TANK TO TANK

BASKET SIZE:  24" (610mm) L x 24" (610mm) W x 4" (101mm) HIGH

PRODUCTION RATE (TYPICAL):  PRODUCES 200 BASKETS OF PRECISION CLEANED AND

RINSED PARTS PER EIGHT HOUR SHIFT.

THE LINE IS INSTALLED IN AN OPERATING FACTORY.

COMPONENT DETAILS:

1. HEATED SOAK TANK
 - 14 GAUGE 304 STAINLESS
 - THERMALLY INSULATED
 - EXTERNAL OVERFLOW TANK
 - 40 KW ELECTRIC IMMERSION HEATERS
 - ROOM TEMPERATURE TO OPERATING TEMPERATURE IN TWO HOURS
 - SPRAY RINSE MOUNTED ON VERTICAL LIFT MECHANISM

2. HEATED ULTRASONIC CLEANING TANK
 - 14 GAUGE 304 STAINLESS
 - 36" (914mm) x 30" (762mm) x 24" (610mm) DEEP
 - 12 KW ELECTRIC IMMERSION HEATERS
 - SPRAY RINSE MOUNTED ON VERTICAL LIFT MECHANISM
 - BOTTOM-MOUNTED LEWIS MODEL "G" TRANSDUCERS,
   2000 WATTS OF ULTRASONIC CLEANING POWER AT 20 KHZ

3. HEATED IMMERSION RINSE TANK
 - SAME SIZE AND DESIGN AS ULTRASONIC TANK
 - USED RINSE WATER
 - SLOPED BOTTOM
 - STAINLESS STEEL IMMERSION HEATERS

4. DEIONIZED RINSE TANK
 - SAME SIZE AND DESIGN AS ULTRASONIC TANK
 - IN-LINE DEMINERALIZER
 - WATER QUALITY 15-18 MEGOHMS PER CM3 RESISTIVITY
 - FIVE IN-LINE FILTERS P.C. CONTROLLED

THIS IS AN IN-LINE SYSTEM WITH CHAIN DRIVEN TRANSFER FROM TANK TO TANK.

THE INDEX ARM WILL INDEX THE WORK THROUGH THE FOUR TANKS AND PUSH THE

BASKETS TO A POINT FULLY OUTSIDE OF THE UNIT. THIS ALLOWS FOR A SINGLE

BASKET OF WORK TO PROGRESS COMPLETELY THROUGH THE SYSTEM WITHOUT ANY

ADDITIONAL BASKETS BEING PLACED INTO THE SYSTEM AFTER THE LAST BASKET

OF WORK.

DESIGN VOLTAGE:  480 VOLTS, 3 PH., 60 HZ
POWER REQUIRED:  80 KW PEAK; 20 KW AVERAGE

     **PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Country:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

 |  Machinery International Corporation  |  Contact Us  |  Email Sales Department  |  203.484.0400  | 

RETURN to complete inventory display       RETURN to our home page