Machinery International Corporation 20 Commerce Drive
North Branford, CT 06471 USA
Tel: +1 203-484-0400
Fax: +1 203-484-4499
sales@machyintl.com
Spanish Flag French Flag German Flag Chinese Flag

GENERAL ELECTRIC CONTINUOUS COPPER ROD DIP FORM CASTING LINE, 36,000 TPY (4006)   Our stock number: 4006

GENERAL ELECTRIC CONTINUOUS COPPER ROD DIP FORM CASTING LINE, 36,000 TPY (4006)

Click on picture below for larger version
GENERAL ELECTRIC CONTINUOUS COPPER ROD DIP FORM CASTING LINE, 36,000 TPY (4006)GENERAL ELECTRIC CONTINUOUS COPPER ROD DIP FORM CASTING LINE, 36,000 TPY (4006)GENERAL ELECTRIC CONTINUOUS COPPER ROD DIP FORM CASTING LINE, 36,000 TPY (4006)
GENERAL ELECTRIC CONTINUOUS COPPER ROD DIP FORM CASTING LINE, 36,000 TPY (4006)GENERAL ELECTRIC CONTINUOUS COPPER ROD DIP FORM CASTING LINE, 36,000 TPY (4006)


MACHINE # 4006

General Specifications:

   Manufacturer:             General Electric Company
   Capacity:                 10,000 - 36,000 Tons/Year (6 Tons/Hour)
   Input Material:           Copper Cathode
   Output Material:          High Quality Wire with Low Oxygen Content
                             (less than 10 parts per million).
                             In Coil Form as Small as 1/2" Diameter
Line Consists Of:


1. Destacker
   Manufacturer:             Gifford-Wood
   Type:                     Vacuum Destacker
   Capacity:                 500 Lbs.
   Roller Bed:               42" x 12 Ft.

2. Pre-Heat Furnace
   Manufacturer:             The Electric Furnace Co
   Type:                     Gas Fired-Direct Fire
   No. Of Burners:           16
   Operating Temp.:          1600 Degrees F.
   Continuous Roller Hearth
   Inert Gas Atmosphere

3. Melting Furnace (PLEASE NOTE MELTING FURNACE NOT AVAILABLE)
   Manufacturer:             Ajax Magnathermic
   Type:                     Channel Induction Drum Type Furnace
   Power:                    (2) 450 Kw Inductors
   Melt Rate:                6 Tons/Hour
   Molten Copper Cap.:       50,000 Lbs. (25 Tons)

4. Holding Furnace
   Manufacturer:             Ajax Magnathermic(PLEASE NOTE NOT AVAILABLE AND

                             MUST BE SUPPLIED BY BUYER)
   Model:                    2FWA1
   Type:                     Dual Hearth, Two Section
   Power:                    (2) 120 Kw Single Direction Flow
                             Inductors, 1100 Amps
   Operating Temp.:          2100 Degrees F.
   Molten Copper Cap.:       15,000 Lbs. (7.5 Tons)

5. Casting Station
   Manufacturer:             Ajax Magnathermic/General Electric (NOT COMPLETE)
   Power:                    3000 Hz, 100 Kw
   Water Cooled Coil
   Exit Temp. Of Cast Rod:   1983 Degrees F.
   Accretion Rate:           1.7 to 1
   Water Cooling Rate:       70 G.P.M.
   Cooling Tank:             Hydromation Model HV-6H
   Cooling Capacity:         4 Million BTU
   Cooling Water Flow:       425 GPM

6. Rolling Mill Stands:
   Manufacturer:             Waterbury Farrel
   No. Of Stands:            5
   Type:                     Cross-Head Tandem Rod Mill
   Drive Motors:             (1) 50 H.P., & (4) 40 H.P., G.E.,
                             D.C., 1750 RPM,
   Roll Size:                8" Dia. x 3" Face
   Gear Box:                 Falk, 
   1st Stand:                Ratio 3.357 output RPM 192/329
   2nd Stand:                Ratio 3.357 output RPM 192/329
   3rd Stand:                Ratio 3.339 output RPM 209/359
   4th Stand:                Ratio 3.339 output RPM 318/537
   5th Stand:                Ratio 3.339 output RPM 419/719

**PLEASE NOTE MOTOR SPECIFICAITON FOR REFERENCE. MOTORS ARE MISSING AND MUST

**BE SUPPLIED BY THE BUYER**

7. Dead Block Coiler
   Manufacturer:             Vaughn Machine Co.
   Type:                     Dead Block Rod Coiler
   Drum Dia.:                42"
   Drive Motor:              50 H.P., D.C. (PLEASE NOTE MOTOR MISSING AND MUST

                             BE SUPPLIED BY BUYER)
   Tilting Turntable (PLEASE NOTE TURNTABLE MISSING AND MUST BE SUPPLIED BY
                             BUYER)
   Coil PushOff Flange
   Air Opened Collector Arms
   Coil Rate:                0 - 1400 FPM


**Preliminary Specifications Not All Items Listed Maybe Still Available**

**PRICE QUOTED IS EX WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE**

 **ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

 |  Machinery International Corporation  |  Contact Us  |  Email Sales Department  |  203.484.0400  | 

RETURN to complete inventory display       RETURN to our home page