Machinery International Corporation 20 Commerce Drive
North Branford, CT 06471 USA
Tel: +1 203-484-0400
Fax: +1 203-484-4499
sales@machyintl.com
Spanish Flag French Flag German Flag Chinese Flag

1800 Ton, LOMBARD, EXT SPEED 1.5 - 38mm/sec. 150/203mm BILLET DIA (12457)   Our stock number: 12457

1800 Ton, LOMBARD, EXT SPEED 1.5 - 38mm/sec. 150/203mm BILLET DIA (12457)

Click on picture below for larger version
1800 Ton, LOMBARD, EXT SPEED 1.5 - 38mm/sec. 150/203mm BILLET DIA (12457)1800 Ton, LOMBARD, EXT SPEED 1.5 - 38mm/sec. 150/203mm BILLET DIA (12457)1800 Ton, LOMBARD, EXT SPEED 1.5 - 38mm/sec. 150/203mm BILLET DIA (12457)1800 Ton, LOMBARD, EXT SPEED 1.5 - 38mm/sec. 150/203mm BILLET DIA (12457)
1800 Ton, LOMBARD, EXT SPEED 1.5 - 38mm/sec. 150/203mm BILLET DIA (12457)1800 Ton, LOMBARD, EXT SPEED 1.5 - 38mm/sec. 150/203mm BILLET DIA (12457)1800 Ton, LOMBARD, EXT SPEED 1.5 - 38mm/sec. 150/203mm BILLET DIA (12457)1800 Ton, LOMBARD, EXT SPEED 1.5 - 38mm/sec. 150/203mm BILLET DIA (12457)


MACHINE # 12457

EXTRUSION EQUIPMENT

  Billet heater
  Make:                                Maker unknown but utilizes all North

                                       American burner equipment. All gas

                                       train equipment fitted during recent

                                       refurbishment
  Year:                                Manufactured in 1973 and had a major

                                       refurbishment in 1987.
  Type:                                Natural Gas Fired Reverberator Furnace
  Current Operating Rate:              1.64 tons/hr. (150 mm Dia. Billet)
  Electrical Specification:            415 Volt 3 Phase 50 Hz


  Extrusion Press
  Maker:                               Lombard
  Type:                                4 column, Gatelock type Rod Press
  Year:                                1958 and refurbished in 1997 with new

                                       PLC, controls and video monitoring
  Rating:
    Extrusion                          1800 US tons @ 3000 psi
    Closing                             134 US tons @ 3000 psi
    Return                               80 US tons @ 3000 psi
    Container Seal                       80 US tons @ 3000 psi
    Container Open                      134 US tons @ 3000 psi
    Butt Shear                           67 US tons @ 3000 psi
  Extrusion speed                      1.5 to 38mm/sec
  Billet Size :                        Currently configured for 150mm and

                                       203mm billet. Maximum size available

                                       is 203mm.
  Billet Length (maximum):             584mm
  Hydraulics:                          Oilgear
                                       3 main pumps Variable Delivery Oilgear

                                       DV 150. 3 x 200 HP main drive motors.
  Electrical Connection:               415 V 3 Phase 50 Hz
  Container Heating                    30kW
  Die Stack:                           305mm dia x 213 thick
  Electrical Control                   Omron PLC with PC graphics screen

        and press monitor
  Major Tools:                         3 x Containers and 3 x stems for

                                       150mm billets.
                                       1 x Container and 2 x stems for

                                       203mm dia billet.

Please note that this press is suitable for extrusion of both aluminum and

brass.

  Runout Equipment
  Comprising:
    Initial Table
    Single Coiler
    Runout Table
    Cross transfer table
    Saw feed conveyor
    Cold product cut to length saw
    Coil conveyor
    Coil final quench tank
    Back end testing device for coil (Nick and Break)
    Coil removal capstan
  Runout Table:                        Effective length 30m
                                       Width 400mm
                                       Cast Iron cooling plates
  Cooling Table:                       Effective length 30m
                                       Width of Cooling table 2700mm
  Saw Charge Table:                    Length 25m
                                       Width 400mm
  Cutting saw :                        Donaldson Saw
                                       Range 150mm h x 75mm w (approx.)
                                       Motor 10 HP
  Saw Gauge Table:                     Length 6300mm
                                       Width 400mm
                                       Cutting length range 1600mm- 6300mm
      Coiler:                          Single unit
                                       Drum Size 905mm OD x 618mm ID
                                       Depth 250mm
                                       Drive 1x_.kW MicroDrive variable
                                       speed AC motor drive
                                       Coiler to suit Wire 3.6mm - 20mm dia
                                       Flat to 25.4mm x 3.2mm 

Complete with coil off-take conveyor, final water quench unit and nick and

break back end test unit

  Electrical Connection:               415V 3 Phase 50 Hz

  Ancillary Press Equipment

  Comprising :                         Electric Die Oven - ___kW
        1 t electric jib hoist for
        tool loading
        Die grit blasting machine
        Pedestal drill
        Tool assembly tables
        Tool racks

**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

 |  Machinery International Corporation  |  Contact Us  |  Email Sales Department  |  203.484.0400  | 

RETURN to complete inventory display       RETURN to our home page