Machinery International Corporation 20 Commerce Drive
North Branford, CT 06471 USA
Tel: +1 203-484-0400
Fax: +1 203-484-4499
sales@machyintl.com
Spanish Flag French Flag German Flag Chinese Flag

60" (1524mm) x 9" (228mm) EMAG SLITTING, UNCOILER, .3125" @ 55,000 PSI (12076)   Our stock number: 12076

60 (1524mm) x 9 (228mm) EMAG SLITTING, UNCOILER, .3125 @ 55,000 PSI (12076)

Click on picture below for larger version
60 (1524mm) x 9 (228mm) EMAG SLITTING, UNCOILER, .3125 @ 55,000 PSI (12076)60 (1524mm) x 9 (228mm) EMAG SLITTING, UNCOILER, .3125 @ 55,000 PSI (12076)60 (1524mm) x 9 (228mm) EMAG SLITTING, UNCOILER, .3125 @ 55,000 PSI (12076)60 (1524mm) x 9 (228mm) EMAG SLITTING, UNCOILER, .3125 @ 55,000 PSI (12076)
60 (1524mm) x 9 (228mm) EMAG SLITTING, UNCOILER, .3125 @ 55,000 PSI (12076)60 (1524mm) x 9 (228mm) EMAG SLITTING, UNCOILER, .3125 @ 55,000 PSI (12076)60 (1524mm) x 9 (228mm) EMAG SLITTING, UNCOILER, .3125 @ 55,000 PSI (12076)60 (1524mm) x 9 (228mm) EMAG SLITTING, UNCOILER, .3125 @ 55,000 PSI (12076)


MACHINE #12076

SPECIFICATIONS

-MANUFACTURER:     EMAG
-TYPE:             60" X 9" SLITTING LINE
-CAPACITY:         .3125" @ 55,000 PSI TENSILE STRENGTH FOR MORE THAN 4 CUTS
-LINE SPEED:       90/370 FPM (BASED ON EMPTY DRUM)
-DIRECTION:        RIGHT TO LEFT

LINE CONSISTS OF THE FOLLOWING:

-ENTRY COIL CAR
 -"L" TYPE
 -PLATFORM DIMS:
  BACKPLATE TO "V" CENTER OF PLATFORM: 42"
  WIDTH OF PLATFORM: 52" 
 -DRIVE MOTOR:     APPROX. 7.5 HP HYDRAULIC MOTOR/PUMP, 480 VOLT
 -UNIT IS EQUIPPED WITH SELF CONTAINED HYDRAULICS

-UNCOILER
 -MANDREL SIZE
  FACE WIDTH:      64"
  DIAMETER:        20" - 24" EXPANSION RANGE
  TYPE:            4 SEGMENT MANDREL
                   HYDRAULIC EXPANSION 
  BASE TYPE:       SLIDE BASE 
  BRAKE TYPE:      AIR BRAKE
  PASSLINE:        APPROX. 53" FROM FLOOR TO CENTER OF MANDREL

-FREE STANDING OVERARM HOLD DOWN & PEELER TABLE
  -TYPE:           POWERED HOLDDOWN ROLL
  -EQUIPPED WITH A 4 ROLL COIL BREAKER

-HYDRAULIC CROP SHEAR

-SLITTER HEAD
 -ARBOR SIZE:      9" DIAMETER
                   BOTTOM ARBOR ADJUSTED BY JACKSCREWS
 -DRIVE MOTOR:     20 HP BALDOR 1760 RPM AC FEEDUP DRIVE, 220/440 V
                   THRU ALTON REDUCER W/31.39:1 RATIO RATED AT 36.8

                   HP, 1.0 SERV. FACTOR & OVERRUNNING CLUTCH
 -HELPER DRIVE:    15 HP RELIANCE 1765 RPM DC MOTOR BELT DRIVEN TO

                   PINION STAND W/6:1 RATION (APPROX.)

 -EQUIPPED WITH ENTRY PASSLINE ROLL. ENTRY EDGE GUIDES AND POWERED ENTRY PINCH

ROLLS

-TREADING TABLE TO RECOILER

-RECOILER
 -MANDREL SIZE
  -DIAMETER:       20" 
  -FACE WIDTH:     64" 
  -TYPE:           MANUAL GRIP AND EXPANSION WITH HYDRAULIC PUSH-OFF

 -DRIVE MOTOR:     200 HP DC MOTOR, 500/2000 RPM 
 -REDUCER:         ALTON REDUCER WITH APPROX. 28:1 REDUCTION RATIO

 -EQUIPPED WITH OVERARM SEPARATOR  

-EXIT COIL CAR:
 -TYPE:            PIT TYPE WITH "V" PLATFORM
 -PLATFORM DIMS:   FROM EDGE OF PLATFORM TO CENTER: 20"
                   PLATFORM WIDTH: 65.50" 
 -DRIVE MOTOR:     7.5 HP, 208 / 230 / 460 VOLT HYDRAULIC MOTOR / PUMP 
 -VERTICAL TRAVEL OF COIL CAR PLATFORM:  20" APPROX. 

**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**
 
**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Country:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

 |  Machinery International Corporation  |  Contact Us  |  Email Sales Department  |  203.484.0400  | 

RETURN to complete inventory display       RETURN to our home page