Machinery International Corporation 20 Commerce Drive
North Branford, CT 06471 USA
Tel: +1 203-484-0400
Fax: +1 203-484-4499
sales@machyintl.com
Spanish Flag French Flag German Flag Chinese Flag

36" (915mm) x 4 1/4" (108mm) x 10,000 LB. (4536 KG) PAXSON SLITTING LINE (11955)   Our stock number: 11955

36 (915mm) x 4 1/4 (108mm) x 10,000 LB. (4536 KG) PAXSON SLITTING LINE (11955)

Click on picture below for larger version
36 (915mm) x 4 1/4 (108mm) x 10,000 LB. (4536 KG) PAXSON SLITTING LINE (11955)36 (915mm) x 4 1/4 (108mm) x 10,000 LB. (4536 KG) PAXSON SLITTING LINE (11955)36 (915mm) x 4 1/4 (108mm) x 10,000 LB. (4536 KG) PAXSON SLITTING LINE (11955)36 (915mm) x 4 1/4 (108mm) x 10,000 LB. (4536 KG) PAXSON SLITTING LINE (11955)
36 (915mm) x 4 1/4 (108mm) x 10,000 LB. (4536 KG) PAXSON SLITTING LINE (11955)36 (915mm) x 4 1/4 (108mm) x 10,000 LB. (4536 KG) PAXSON SLITTING LINE (11955)36 (915mm) x 4 1/4 (108mm) x 10,000 LB. (4536 KG) PAXSON SLITTING LINE (11955)36 (915mm) x 4 1/4 (108mm) x 10,000 LB. (4536 KG) PAXSON SLITTING LINE (11955)


MACHINE# 11955

SPECIFICATIONS:

DUAL PAYOFF:

PAYOFF No. 1:
 MANUFACTURER:                    PAXSON MACHINE CO.-USA
 CAPACITY:                        10,000 LB. (4536 KG)
 I.D. RANGE:                      14"- 20" (356mm-508mm)
 WIDTH:                           36" (915mm)
 TYPE:                            EXPANDING MANDREL
 TYPE EXPANSION:                  HYDRAULIC
 COIL I.D.:                       36" (915mm) MAXIMUM
 SLIDING BASE:                    HYDRAULIC
 BRAKE FOR BACK TENSION:          HYDRAULIC
 FEED UP DRIVE MOTOR:             3 PH, 208-230/460 VOLT, 1725 RPM,
                                  8.5-8.2/4.1 AMP, 3 PH., 60 HZ
 HYDRAULICS:                      VICKERS MODEL TK10VP-V30F-M

PAYOFF No. 2:
 MANUFACTURER:                    LITTELL
 MODEL:                           18-22-18
 COIL WEIGHT:                     2500 LB. (1134 KG) MAXIMUM
 I.D. RANGE:                      18"-22" (458mm-560mm)
 WIDTH:                           15" (381mm)
 TYPE:                            NON-DRIVEN

 SLITTERHEAD:
  ARBOR DIAMETER:                 4 1/4" (108mm)
  ARBOR WIDTH:                    38" (965mm)
  ENTRY BILLY ROLL:               5" (127mm) DIA. x 36" (915mm)
  TYPE:                           NON-DRIVEN
  PINCH ROLLS:                    4" (102mm) DIA. x 38" (965mm)
  DRIVEN OFF ARBOR DRIVE MOTOR
  ARBOR RETRACTION FOR TOOL CHANGE: MANUAL
  DUAL HAND WHEEL ADJUSTMENT
  DRIVE MOTOR:                    20 HP, 220/440 VOLT, 1750 RPM,
                                  3 PH., 60 HZ

  GEARBOX:                        14 HP RATING, 1750 RPM, 3 PH.,
                                  60 HZ, RATIO 31/1
  KNIFE SIZE:                     4 1/4" (108mm) I.D. x 9 3/4" (248mm) O.D.
  RUBBER SPACERS

 RECOILER:
  TYPE:                           PULL-THROUGH EXPANDING MANDREL
  MANDREL I.D.:                   15 1/2"- 16" (394mm_407mm)
  MANDREL WIDTH:                  36" (915mm)
  EXPANSION:                      MANUAL
  COIL PUSH-OFF:                  HYDRAULIC
  DRIVE MOTOR:                    50 HP, 1750-2100 RPM, 500 VOLT,
                                  83.5 AMP, DC VARIABLE SPEED BY RELIANCE
  GEARBOX RATIO:                  4 TO 1

 ELECTRONICS ON RECOILER DRIVE
  MANUFACTURER:                   BARDAC ELECTRONICS-USA
  TYPE:                           SCR THYRISTOR DC CONTROL

 SCRAP WINDER:
  TYPE:                           DRIVEN

 FLOOR SPACE:                     60 FT. (182m) x 15 1/2 FT. (4.725m)

 EQUIPPED WITH TWO SETS OF KNIVES AND SPACERS.

**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

 **ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Country:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

 |  Machinery International Corporation  |  Contact Us  |  Email Sales Department  |  203.484.0400  | 

RETURN to complete inventory display       RETURN to our home page