Machinery International Corporation 20 Commerce Drive
North Branford, CT 06471 USA
Tel: +1 203-484-0400
Fax: +1 203-484-4499
sales@machyintl.com
Spanish Flag French Flag German Flag Chinese Flag

AVAILABLE FOR IMMEDIATE PURCHASE ALUMINUM/BRASS ROD MILL OPERATION (11708)   Our stock number: 11708

AVAILABLE FOR IMMEDIATE PURCHASE ALUMINUM/BRASS ROD MILL OPERATION (11708)

Click on picture below for larger version
AVAILABLE FOR IMMEDIATE PURCHASE ALUMINUM/BRASS ROD MILL OPERATION (11708)AVAILABLE FOR IMMEDIATE PURCHASE ALUMINUM/BRASS ROD MILL OPERATION (11708)AVAILABLE FOR IMMEDIATE PURCHASE ALUMINUM/BRASS ROD MILL OPERATION (11708)AVAILABLE FOR IMMEDIATE PURCHASE ALUMINUM/BRASS ROD MILL OPERATION (11708)
AVAILABLE FOR IMMEDIATE PURCHASE ALUMINUM/BRASS ROD MILL OPERATION (11708)AVAILABLE FOR IMMEDIATE PURCHASE ALUMINUM/BRASS ROD MILL OPERATION (11708)AVAILABLE FOR IMMEDIATE PURCHASE ALUMINUM/BRASS ROD MILL OPERATION (11708)AVAILABLE FOR IMMEDIATE PURCHASE ALUMINUM/BRASS ROD MILL OPERATION (11708)


MACHINE # 11708

                         COMPLETE PLANT LIQUIDATION

          **TO BE SOLD AS ENTIRE PLANT OR AS INDIVIDUAL MACHINES**

MACHINERY INTERNATIONAL CORP has available for sale the following brass rod

manufacturing plant. Plant can also be used for extrusion of Aluminum

Products.


The total plant available is sufficient to construct a rod plant capable of

producing 10,000 tons per annum of solid brass rounds, hexagons, octagons

and shaped  extrusions within the size range 3.18 mm Dia. to 62 mm Dia.

The detail of the total plant available is as follows:

1) CONTINUOUS CASTER (10766)

  Make:                      Technica Guss
  Year:                      1974
  Type:                      250 DR 111 SNE
  Serial No:                 R73.08.200
  No of stands:              3 (independent)
  Strand Dia:                2 x 8" - 1 x 10"
  Holding Furnace Capacity:  Usage ~ 6200 kg
        HEEL  ~ 2000 kg
Electrical Specification:

  415 V 3 Phase - Two Inductor Coils (two spare coils)

  Holding Furnace:                     300 KW    400 A
  3 Flying Saws - Each:                 22 KW     93 A total
  3 Drives - Each:            11 KW     54 A total
  1 Hydraulic tilt Unit:     7.5 KW     15 A
  3 Fans:                  5.5 - 1.5 - 2.2 KW     20 A total
  Total Connected Load:                580 A

  One Holding Furnace (3 Strands)

  Including:
      One spare Body (bare)
      One spare Inductor (ready)
      Two spare Coils
      Three spare Front Plates (including Coolers)
      One spare W-Channel Mould
      One Withdrawal Unit (3 Strands)

  Including:
    One spare Gear Box (ready
    Two spare Hydraulic Drives (ready)
    Three Flying Saws

  Including:
  One spare Unit (ready)
  Three Billet Runways
  Three Billet stillages

2) CASTHOUSE EQUIPMENT

One (1) Ajax Channel furnaces, 600kW, 5t capacity, 2.5t heel. Melt rate 2 tons

per hour. Comes complete with spare body mounted ready to go on a wheelable

transfer frame as well as having two spare inductors (7387)

One (1) Ajax Channel furnaces, 300 kW, 3 ton capacity, 1 ton heel. Melt rate

600kg/hr. Complete with spare body mounted with inductor ready to go.  Also

has two other spare inductors

Two (2) vibratory feeders for loading furnaces complete with hydraulically

actuated infeed tipping buckets

Two (2) x 3 strand static casting pits with moulds for 150mm Dia. and 200mm

dia.

One (1) 5t Monorail crane for unloading the casting pits

One (1) vibratory dross sieve

One (1)  ingot casting conveyor

One (1) only Noble and Lund Billet saw - 15Hp 30" blade Maximum 9" capacity,

3m table

3) EXTRUSION EQUIPMENT (7378)

  Billet heater
  Make:                      Maker unknown but utilizes all North

                             American burner equipment. All gas

                             train equipment fitted during recent

                             refurbishment
  Year:                      Manufactured in 1973 and had a major

                             refurbishment in 1987.
  Type:                      Natural Gas Fired Reverberator Furnace
  Current Operating Rate:    1.64 tons/hr. (150 mm Dia. Billet)
  Electrical Specification:  415 Volt 3 Phase 50 Hz


  Extrusion Press
  Maker:                     Lombard
  Type:                      4 column, Gatelock type Rod Press
  Year:                      1958 and refurbished in 1997 with new

                             PLC, controls and video monitoring
  Rating:                       
    Extrusion                1800 US tons @ 3000psi
    Closing                   134 US tons @ 3000 psi
    Return                     80 US tons @ 3000 psi
    Container Seal             80 US tons @ 3000 psi
    Container Open            134 US tons @ 3000 psi
    Butt Shear                 67 US tons @ 3000 psi
  Extrusion speed            1.5 to 38mm/sec     
  Billet Size :              Currently configured for 150mm and

                             203mm billet. Maximum size available

                             is 203mm.
  Billet Length (maximum):   584mm
  Hydraulics:                Oilgear
                             3 main pumps Variable Delivery Oilgear

                             DV 150. 3 x 200 HP main drive motors.
  Electrical Connection:     415 V 3 Phase 50 Hz
  Container Heating          30kW
  Die Stack:                 305mm dia x 213 thick
  Electrical Control         Omron PLC with PC graphics screen

        and press monitor
  Major Tools:               3 x Containers and 3 x stems for

                             150mm billets.
                             1 x Container and 2 x stems for

                             203mm dia billet.

Please note that this press is suitable for extrusion of both aluminum and

brass.

  Runout Equipment
  Comprising:
    Initial Table
    Single Coiler
    Runout Table
    Cross transfer table
    Saw feed conveyor
    Cold product cut to length saw
    Coil conveyor
    Coil final quench tank
    Back end testing device for coil (Nick and Break)
    Coil removal capstan
  Runout Table:              Effective length 30m
                             Width 400mm
                             Cast Iron cooling plates
  Cooling Table:             Effective length 30m
                             Width of Cooling table 2700mm
  Saw Charge Table:          Length 25m
                             Width 400mm
  Cutting saw :              Donaldson Saw
                             Range 150mm h x 75mm w (approx.)
                             Motor 10 HP
  Saw Gauge Table:           Length 6300mm
                             Width 400mm
                             Cutting length range 1600mm- 6300mm
      Coiler:                Single unit
                             Drum Size 905mm OD x 618mm ID
                             Depth 250mm
                             Drive 1x_.kW MicroDrive variable
                             speed AC motor drive
                             Coiler to suit Wire 3.6mm - 20mm dia
                             Flat to 25.4mm x 3.2mm 

Complete with coil off-take conveyor, final water quench unit and nick and

break back end test unit

  Electrical Connection:     415V 3 Phase 50 Hz

  Ancillary Press Equipment

  Comprising :               Electric Die Oven - ___kW
        1 t electric jib hoist for
        tool loading
        Die grit blasting machine
        Pedestal drill
        Tool assembly tables
        Tool racks

4) ROD PICKLE (7379)

  4 x 600mm wide x 8m long x 750mm deep pickle tanks. Two units stainless

  steel, one (1) mild steel and one unit lead and brick lined.  One (1)

  1.5t overhead travelling crane to service pickle area.

5) ROD DRAWING EQUIPMENT
    Brookes single chain rod drawbench complete integral push pointer (7380)
      Draw load              25t
      Bed length             13m
      Speeds                 3 speeds electrically switchable.
      Pointer load           t, 10 HP motor
      Motor power            100 HP
      Size range             11.11mm to 57.15mm

    Bigwood single chain rod and forming drawbench (7381)
      Draw load              - 20t
      Bed length             9 m 
      Speeds                 3 (by gearbox selector)
      Motor power            35 HP
      Size range             14.58mm to 62mm
      Features               Has backbench and fittings for use
        of single mandrel rod

    Schumag combined drawbench (7382)
      Size 0
      Comprising:
      Pre-straightener
      Drawbench - Speed 30m/min.
      Two plane straightener with coiler attachment
      Shear
      Runout
      Overhead coil hoist for coil removal

    Preparation Equipment
      One (1) bar miller
      One (1) machine pointer - maximum 2" capacity
      One (1) Roll pointer 1/16" to " for Schumag
      One (1) Welder for Schumag
      One (1) Micro Products welder for Schumag
      One (1) small machine pointer
      One (1) large machine pointer
      One (1) Back End Testing station featuring feed racks and Nick
      and Break tester and cutoff saw.

6) ROD FINISHING EQUIPMENT
    Straightening and Cutting
      One (1) Bigwood reeler Model number RMT complete with infeed table and

      in line radial Arm cutoff saw, outfeed conveyor and box conveyor.

      Capable of 101.6 dia rod. (7384)

      One Keiserling and Albrecht reeler (2 work rolls and 5 back up rolls)

      with closeable inlet table, kined exit table and suitable for up to

      50mm rod.(7385)


      One (1) Bigwood Model RS 2 8 roll single plane straightener rated to

      1.375" Sq Steel. Complete with infeed  table, outfeed rack, roller

      conveyor to in-line cutoff saw (7386)

      One (1) only 20ton stretcher with integrated inspection table and in

      line cutoff saw and packing conveyor.


7) TOOLING
    Approximately 1000 Extrusion dies, 50 Extrusion die holders, 400 Extrusion

    support tools and an array of drawing and forming dies for finishing of

    standard rounds, hexagons, squares, & octagons in ranges 3.96mm to 62mm.

8) CORECO SWARF DRYER (7408)
    Manufacturer:            College Research Corp of
                             Butler, Wisconsin
    Year of Installation:    1977
    Model No.:               1231
    Afterburner Model No.:   5003
    Dryer Rated Capacity:    2000 Lbs./Hr.

    Dryer Specifications:
      Size:                  1830mm W x 2590mm H x 5030mm L
      Weight:                5000 Kg
      Fuel:                  Natural Gas
      Elec Demand:           4.6 kW
      Zones:                 Two (2)

    Afterburner Specifications:
      Size:                  1500mm Dia. x 2640mm H
      Weight:                8000 Lbs.
      Fuel:                  Natural Gas
      Fuel Demand:           2,700,000 BTU/Hr. (maximum)
      Capacity:              141 Cubic m/Min.
      Retention Time:        0.5 sec @ maximum flow

..........................For Further Information  
..................................Contact  
............................. Steve McMillan
............................steve@machyintl.com

**PLEASE NOTE - CARE IS TAKEN TO GIVE ACCURATE AND RELIABLE DESCRIPTIONS,
  BUT THESE ARE NOT GUARANTEED, AND PROSPECTIVE PURCHASERS ARE ADVISED TO
  CHECK ANY VITAL DETAILS***

**PRICE QUOTE AS IS WHERE IS SUBJECT TO PRIOR SALE**

* *ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

 |  Machinery International Corporation  |  Contact Us  |  Email Sales Department  |  203.484.0400  | 

RETURN to complete inventory display       RETURN to our home page