Machinery International Corporation 20 Commerce Drive
North Branford, CT 06471 USA
Tel: +1 203-484-0400
Fax: +1 203-484-4499
sales@machyintl.com
Spanish Flag French Flag German Flag Chinese Flag

1 1/2" (38mm), HETRAN, No. WS-15, BAR PEELER, 4000# COILS (11585)   Our stock number: 11585

1 1/2 (38mm), HETRAN, No. WS-15, BAR PEELER, 4000# COILS (11585)

Click on picture below for larger version
1 1/2 (38mm), HETRAN, No. WS-15, BAR PEELER, 4000# COILS (11585)1 1/2 (38mm), HETRAN, No. WS-15, BAR PEELER, 4000# COILS (11585)1 1/2 (38mm), HETRAN, No. WS-15, BAR PEELER, 4000# COILS (11585)1 1/2 (38mm), HETRAN, No. WS-15, BAR PEELER, 4000# COILS (11585)
1 1/2 (38mm), HETRAN, No. WS-15, BAR PEELER, 4000# COILS (11585)1 1/2 (38mm), HETRAN, No. WS-15, BAR PEELER, 4000# COILS (11585)1 1/2 (38mm), HETRAN, No. WS-15, BAR PEELER, 4000# COILS (11585)1 1/2 (38mm), HETRAN, No. WS-15, BAR PEELER, 4000# COILS (11585)


MACHINE 11585

We are pleased to offer the following for your consideration, subject to

attached terms and conditions:

(1) Used HETRAN Coil-to-Coil Rod and Wire Peeling/Shaving Line,
Model WS-15, New 1993

Specifications:

Working Range Finish Dia.: 0.5" - 1.5"
Wire Throughfeed Speed:    Up To 150' / Min.
Diameter Tolerance:        -0" / +0.003"
Removal in Diameter:       0.012" - 0.080"
Motor:                     100 HP  DC  440V  3/60

Line Consists of the Following Components:

1.  5000 Lb. Horizontal Pay-Off Reel w/ (1) Set of Infeed Rolls

2.  (3) 7-Roll Straightening Sections (2) Horizontal and (1) Vertical)
        All Rolls Driver

3.  (1) 4-Roll Infeed Unit, Hydraulically Driven

4.  Shaving Head Mounted on Rod Shaver Spindle Driven Through Infinitely-

Variable SCR-Controlled 100 HP Motor, Spindle Runs on Super-Precision Angular

Contact Bearings and Carries the Shaving Head Self-Centering Material Entry

and Exit Guide Assemblies in Front and Back
                           (1) 4-Toolholder Shaving Head
                           Precision Set-Up Fixture to Pre-Set Toolholders
                           Tool Wear Compensation Device

5.  (2) 4-Roll Pinch Roll Units, Air-Actuated

6.  Items #2 - #5 are Mounted on a Common Steel-Frame Base. Steel Chips Drop

Directly onto Chip Conveyor. The Machine Base is Also Used for Recirculating

Coolant Reservoir.

7.  (1) Chip Conveyor w/ (1) High-Pressure Coolant Pump

8.  (3) Belt Polishers, Model BP-2
                           Working Diameter Range:0.5" - 1.5"
                           Wire Throughfeed Speed:Up To 150' / Min.
                           Abrasive Belt Size:8" Wide x 60" Length
                           Motors: 15 HP  AC  460V
                           Each Belt Polisher Consists of (1) Polishing Head

                           Assembly w/ (3) Rollers ((1) Idle,
                           (1) Tracking and (1) Drive Roll).
                           A Horizontal Pinch Roll Unit is Mounted on
                           Exit End of Each Polisher Housing.

9.  (1) Filtering System

10. (1) Horizontal Straightener Section

11. (1) Tension-Free Recoiler Unit
                           4-Aluminum Roll Feed-Out Unit and 3-Roll Recoiler,

                           Hydraulically Driven Double Carrousel Stand

12. (1) Hydraulic Power Unit

13.  All Input Electrics are 460V. All Operating Electrics are 110V.

14.  (1) Pendulum-Mounted Operator's Control Panel

Floor Space Required (Approx.):55' x 23'

**PLEASE NOTE PRELIMINARY SPECIFICATIONS**

**PRICE QUOTED IS AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATIONS BY PURCHASER**



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Country:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

 |  Machinery International Corporation  |  Contact Us  |  Email Sales Department  |  203.484.0400  | 

RETURN to complete inventory display       RETURN to our home page