Machinery International Corporation 20 Commerce Drive
North Branford, CT 06471 USA
Tel: +1 203-484-0400
Fax: +1 203-484-4499
sales@machyintl.com
Spanish Flag French Flag German Flag Chinese Flag

NEW, 14"- 6"(355mm) OCN, 2004, 3 STRAND COPPER BILLET CASTER (10509)   Our stock number: 10509

NEW, 14 - 6 (355mm) OCN, 2004, 3 STRAND COPPER BILLET CASTER (10509)

Click on picture below for larger version
NEW, 14 - 6 (355mm) OCN, 2004, 3 STRAND COPPER BILLET CASTER (10509)NEW, 14 - 6 (355mm) OCN, 2004, 3 STRAND COPPER BILLET CASTER (10509)NEW, 14 - 6 (355mm) OCN, 2004, 3 STRAND COPPER BILLET CASTER (10509)NEW, 14 - 6 (355mm) OCN, 2004, 3 STRAND COPPER BILLET CASTER (10509)
NEW, 14 - 6 (355mm) OCN, 2004, 3 STRAND COPPER BILLET CASTER (10509)NEW, 14 - 6 (355mm) OCN, 2004, 3 STRAND COPPER BILLET CASTER (10509)NEW, 14 - 6 (355mm) OCN, 2004, 3 STRAND COPPER BILLET CASTER (10509)NEW, 14 - 6 (355mm) OCN, 2004, 3 STRAND COPPER BILLET CASTER (10509)



NOTE: THIS MACHINE WAS PURCHASED NEW IN 2004 BUT NEVER INSTALLED. IT IS IN

STORAGE, MUCH OF IT IN THE MANUFACTURER'S ORIGINAL CRATES. PURCHASE PRICE NEW

IN 2004 WAS $2.2 MILLION EUROS. PURCHASER MUST SUPPLY MELTING AND HOLDING

FURNACES OR MACHINERY INTERNATIONAL CAN SUPPLY THEM SEPARATELY. THIS IS A

GREAT OPPORTUNITY TO ACQUIRE A HIGH QUALITY BRAND NEW THREE STRAND COPPER

BILLET CASTING LINE.


MACHINE# 10509

SPECIFICATIONS:
  MANUFACTURER:                  O.C.N. SPA (ITALY)
  YEAR OF MANUFACTURE:           2004 (NEVER INSTALLED)
  TYPE:                          VERTICAL CONTINUOUS COPPER BILLET CASTER

No. OF BILLET STRANDS:
  CAST SIMULTANEOUSLY:           3

BILLET DIAMETER:
  MINIMUM:                       6" (152mm)
  MAXIMUM:                       14" (355mm)
  PRESENTLY TOOLED FOR:          14" (355mm

RATED CAPACITY                   16 TO 18 METRIC TONS PER HOUR


MELTING & HOLDING FURNACES:      TO BE SUPPLIED SEPARATELY BY PURCHASER

BILLET MOLDS:                    STAINLESS STEEL WATER JACKETED

BILLET COOLING:
  STAGE 1 :                      WATER BOX BELOW MOLD SYSTEM
  STAGE 2 :                      TWIN FLOATING RUBBER SEALS PLUS AIR SPRAY

                                 NOZZLES ASSURE A DRY BILLET AT EXIT TO

                                 ELIMINATE OXIDATION.

PINCH ROLL FEED:
  TYPE:                          STAINLESS STEEL ROLLS
  No. OF ROLLS:                  FOUR ROLLS AT EACH BILLET

CASTING SPEED:                   50mm - 150mm/MIN. (2 - 6 IPM)
ALLOY:                           DHP COPPER
OUTPUT:                          15 METRIC TONS/HR.

FLYING CUTOFF SAW:
  SAW BLADE DIAMETER:            1400mm (55")
  CUTOFF LENGTHS:                 700mm - 1500mm (27.5"- 59")
  DRIVE MOTOR:                   90 kW
SAW FEED RANGE:
  CUTTING STROKE:                 2.5mm - 25mm/SEC. (0.1 - 1 IN./SEC.)
  AVERAGE CUTTING STROKE:          15mm/SEC. (0.6 IN./SEC.)
  MAXIMUM IDLE SPEED:             100mm/SEC.   (4 IN./SEC.)
  RETURN SPEED:                   100mm/SEC.   (4 IN./SEC.)
TOLERANCE OF SAW CUT:            +/-3mm (0.12")
VACUUM CHIP COLLECTING SYSTEM

SYSTEM HYDRAULIC DRIVE:          50kW

MICROPROCESSOR SYSTEM FOR MAXIMUM AUTOMATION TO SET UP A NEW PROGRAM,
OPERATOR ONLY INPUTS:

1. MAXIMUM CUTTING FEED RATE ON POTENTIONMETER
2. MAXIMUM SYSTEM WORKING PRESSURE
3. CASTING SPEED
4. CASTING LENGTH

CHIP COLLECTING SYSTEM:
  VACUUM SYSTEM
  CYCLONE UNIT:                  30kW BLOWER DRIVE
  HOPPER SECTION FOR CHIP STORAGE
  CHIP DISCHARGE VALUE

CUT BILLET DOWNENDER:
  RECEIVING BASKET:              HYDRAULIC TO MINIMIZE IMPACT
  DOWNENDER:                     TRANSFERS CUT BILLET FROM VERTICAL
                                 TO HORIZONTAL ALIGNMENT
BILLET DISCHARGE INTO A DRIVEN
  ROLLER DRIVEN CONVEYOR:        EJECTOR PLATE PUSHER

BILLET ELEVATOR:                 TO ELEVATE BILLET BACKUP TO GROUND LEVEL

POWER INPUT:                     440 VOLTS, 3 PH., 60 Hz

GENERAL ELECTRIC PROGRAMMABLE CONTROLS: SCR THYRISTOR

VICKERS HYDRAULIC

WATER COOLING SYSTEM:
  No. OF PUMPS:                  TWO (ONE IN OPERATION; ONE BACKUP)
  PUMP DRIVE:                    100kW, 1750 RPM, 3 PH., 60 Hz
  FLOW RATE:                     375 CBM/HR.

PIPING NOT INCLUDED.

ESTIMATED SHIPPING REQUIRED:     (10) x 40 FT. CONTAINERS OR FLATBEDS

THIS BILLET CASTING LINE WAS MANUFACTURED NEW IN 2004 BUT NEVER INSTALLED.
IT IS PRESENTLY IN STORAGE.

**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

 **ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

 |  Machinery International Corporation  |  Contact Us  |  Email Sales Department  |  203.484.0400  | 

RETURN to complete inventory display       RETURN to our home page