Machinery International Corporation 20 Commerce Drive
North Branford, CT 06471 USA
Tel: +1 203-484-0400
Fax: +1 203-484-4499
sales@machyintl.com
Spanish Flag French Flag German Flag Chinese Flag

No. BB-14 FENN 6 BLOCK, 0.187"-0.25" (4.7-6.3mm), 14" DIA. BLOCKS (11186)   Our stock number: 11186

No. BB-14 FENN 6 BLOCK, 0.187 -0.25 (4.7-6.3mm), 14 DIA. BLOCKS (11186)

Click on picture below for larger version
No. BB-14 FENN 6 BLOCK, 0.187 -0.25 (4.7-6.3mm), 14 DIA. BLOCKS (11186)No. BB-14 FENN 6 BLOCK, 0.187 -0.25 (4.7-6.3mm), 14 DIA. BLOCKS (11186)No. BB-14 FENN 6 BLOCK, 0.187 -0.25 (4.7-6.3mm), 14 DIA. BLOCKS (11186)No. BB-14 FENN 6 BLOCK, 0.187 -0.25 (4.7-6.3mm), 14 DIA. BLOCKS (11186)
No. BB-14 FENN 6 BLOCK, 0.187 -0.25 (4.7-6.3mm), 14 DIA. BLOCKS (11186)No. BB-14 FENN 6 BLOCK, 0.187 -0.25 (4.7-6.3mm), 14 DIA. BLOCKS (11186)No. BB-14 FENN 6 BLOCK, 0.187 -0.25 (4.7-6.3mm), 14 DIA. BLOCKS (11186)


MACHINE # 11186

MANUFACTURER:                  FENN MANUFACTURING COMPANY

MODEL:                         6 DIE B/B 14

DRAWING BLOCK SIZES:           14" (355.6mm) DIAMETER
                               3.665 FT. (1.12m) CIRC.

NUMBER OF DRAWING BLOCKS:      6 VERTICAL BLOCKS

CAPACITY:
 -START SIZE:                  .187" (4.7mm) DIAMETER LOW CARBON STEEL
                               .125" (3.2mm) DIAMETER HIGH CARBON STEEL
 -FINISH SIZE:                 .025"/.032" (.64mm/.81mm) DIAMETER


MAXIMUM SPEED:                 2000 FPM

DRIVE MOTORS
 -MANUFACTURER:                GENERAL ELECTRIC
 -QUANTITY:                    6 (ONE ON EACH BLOCK)
 -SPECS:                       10 HP (7.45Kw) 1150/2400 RPM DC

GEARBOXES
 -TYPE:                        WORM GEAR DRIVEN BY DRIVE MOTORS VIA BELTS
                               FOR FURTHER SPEED REDUCTION

 -RATIOS/BLOCK SPEEDS:         WORM RATIO    O/A RATIO        BLOCK RPM

  -BLOCK #1                     9.75/1        13.536/1         84.9/177.3
  -BLOCK #2                     7.4/1         10.859/1        105.9/221
  -BLOCK #3                     7.4/1          8.623/1        133.4/278.3
  -BLOCK #4                     5.125/1        6.874/1        167.3/349.2
  -BLOCK #5                     5.125/1        5.498/1        209.2/436.5
  -BLOCK #6                     5.125/1        4.398/1        261.5/545.7

LAST BLOCK (FINISH BLOCK) IS THE ACCUMULATING BLOCK AND IS EQUIPPED WITH A

RIDING STRIPPER.

ELECTRICS - BUYER TO SUPPLY NEW ELECTRICAL CONTROLS

 -WATER REQUIREMENTS:          9.2 GPM MINIMUM-PRESSURE 40 PSI

 -OVERALL DIMENSIONS
  -LENGTH:                     APPROXIMATELY 16'-0" (4.8m)
  -WIDTH:                      56" (1422mm)
  -HEIGHT:                     69" (1753mm) GUARD CLOSED

INCLUDED WITH THE B/B 14 IS AN OVERHEAD TYPE WIRE PAYOFF UNIT TO PAYOFF WIRE

DIRECTLY FROM A WIRE CARRIER. PAYOFF HEIGHT IS 8'-9".

KEY FEATURES:

LONG DWELL BETWEEN THE DIES WITH DOUBLE AIR COOLING OF WIRE ACCUMULATION 

ON BOTH LOWER AND UPPER BLOCKS IN ADDITION TO INTERNAL WATER COOLING.

WATER COOLED DIE HOLDERS.

COMPLETE ELIMINATION OF AXIAL TWIST FROM ONE BB BLOCK TO THE NEXT.

CONTINUOUS PRODUCTION DURING COIL AND SPOOL UNLOADING PERIODS.

FULLY AUTOMATIC CONTROL OF WIRE ACCUMULATIONS.

A.C. FIXED SPEED OR D.C. VARIABLE SPEED DRIVE ARRANGEMENT.

THE RUGGED BASE FROM CONSTRUCTION IS DESIGNED TO BE INSTALLED ON A FLAT

SURFACE WHICH MINIMIZES FOUNDATION WORK. THE DIE BOXES AND DOUBLE BLOCK UNITS

ARE MOUNTED ON TOP OF THIS BASE IN WHICH THE WORM GEAR DRIVES ARE HOUSED.

THE WORM SHAFT IS BELT DRIVEN FROM THE MAIN DRIVE MOTOR GIVING HIGH

EFFICIENCY AND LOW NOISE LEVELS. WHERE REQUIRED, HIGH SPEED BLOCKS ARE

DIRECTLY BELT DRIVEN FROM THE MOTOR.

THE DIE BOXES FEATURE A LARGE CAPACITY SOAP CONTAINER AND ARE DESIGNED TO

ACCEPT STANDARD DIE CASE SIZES.

THE WIRE PATH IS FROM THE DIE ONTO THE BOTTOM BLOCK, THEN ROUND A TAKE-OFF

PULLEY ONTO THE TOP BLOCK. FROM THE TOP BLOCK THE WIRE PASSES OVER A TRANSFER

PULLEY SYSTEM TO THE NEXT DIE STAND.

DEPENDING ON THE MATERIAL AND SIZE OF THE WIRE, FINISHING SPEEDS OF UP TO

25 m/s (5000 FPM) ARE ACHIEVABLE.

FINISHED WIRE CAN BE COLLECTED ON A HIGH CAPACITY STRIPPER BLOCK, A SPOOLER

OR A ROTODIE, ALL OF WHICH CAN BE SUPPLIED BY MRB.

THE DOUBLE BLOCK SYSTEM ACTS AS AN ACCUMULATOR ALLOWING THE REMOVAL OF

FINISHED COILS WITHOUT STOPPING THE MAIN MACHINE.

     **PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**



Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Country:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

 |  Machinery International Corporation  |  Contact Us  |  Email Sales Department  |  203.484.0400  | 

RETURN to complete inventory display       RETURN to our home page