Machinery International Corporation 20 Commerce Drive
North Branford, CT 06471 USA
Tel: +1 203-484-0400
Fax: +1 203-484-4499
sales@machyintl.com
Spanish Flag French Flag German Flag Chinese Flag

TECHNICA, CONTINUOUS NON-FERROUS 8"-10" (200-250mm) BILLET CASTER (10766)   Our stock number: 10766

TECHNICA, CONTINUOUS NON-FERROUS 8 -10 (200-250mm) BILLET CASTER (10766)

Click on picture below for larger version
TECHNICA, CONTINUOUS NON-FERROUS 8 -10 (200-250mm) BILLET CASTER (10766)TECHNICA, CONTINUOUS NON-FERROUS 8 -10 (200-250mm) BILLET CASTER (10766)TECHNICA, CONTINUOUS NON-FERROUS 8 -10 (200-250mm) BILLET CASTER (10766)TECHNICA, CONTINUOUS NON-FERROUS 8 -10 (200-250mm) BILLET CASTER (10766)
TECHNICA, CONTINUOUS NON-FERROUS 8 -10 (200-250mm) BILLET CASTER (10766)TECHNICA, CONTINUOUS NON-FERROUS 8 -10 (200-250mm) BILLET CASTER (10766)TECHNICA, CONTINUOUS NON-FERROUS 8 -10 (200-250mm) BILLET CASTER (10766)TECHNICA, CONTINUOUS NON-FERROUS 8 -10 (200-250mm) BILLET CASTER (10766)


MACHINE # 10766

CONTINUOUS CASTER:
  MANUFACTURER:                  TECHNICA GUSS
  YEAR OF MANUFACTURE:           1974
  MODEL NO.:                     250 DR 111 SNE
  STRAND DIAMETER:               2 x 8" DIAMETER OR 1 X 10" DIAMETER
                                 2 X (203.2mm) DIAMETER OR 1 X 10" (254mm)

                                 DIAMETER
  HOLDING FURNACE CAPACITY:       USAGE - 6200 KG
                                   HEEL - 2000 KG

ELECTRICAL SPECIFICATIONS:       415 VOLT, 3 PHASE
                                  TWO (2) INDUCTOR COILS
                                 (TWO (2) SPARE COILS)
  HOLDING FURNACE:                           300 KW, 400 AMPS
  THREE (3) FLYING SAWS (EACH):               22 KW,  93 AMPS
  THREE (3) DRIVES (EACH):                    11 KW,  54 AMPS TOTAL
  ONE (1) HYDRAULIC TILT UNIT:               7.5 KW,  15 AMPS
  THREE (3) FANS:                5.5 - 1.5 - 2.2 KW,  20 AMPS TOTAL

  TOTAL CONNECTED LOAD:                              580 AMPS

ONE (1) HOLDING FURNACE (3 STRANDS):
  INCLUDING:
   ONE (1) SPARE BODY (BARE)
   ONE (1) SPARE INDUCTOR (READY)
   TWO (2) SPARE COILS
   THREE (3) SPARE FRONT PLATES (INCLUDING COOLERS)
   ONE (1) SPARE W-CHANNEL MOLD

ONE (1) WITHDRAWAL UNIT (3 STRANDS):
  INCLUDING:
   ONE (1) SPARE GEAR BOX (READY)
   TWO (2) SPARE HYDRAULIC DRIVES (READY)

THREE (3) FLYING SAWS:
  INCLUDING:
   ONE (1) SPARE UNIT (READY)

THREE (3) BILLET RUNWAYS

THREE (3) BILLET STILLAGES

INDUCTOR COILS:
  1. SCOTT CONNECTED  - BALANCED OVER 3 PHASES
  2. SECONDARY VOLTAGE FROM 170 VOLTS TO 540 VOLTS IN 10 STEPS
     (MANUALLY OPERATED VIA TAPPING SWITCH ON MAIN PANEL)

PROCESS CONTROLLER:
  MANUFACTURER:                  SIEMENS SIMATIC
  MODEL NO.:                     SS 115U
  (SOME SPARES)

  TWO (2) PRIMING CHAMBERS, VALVES, PIPE WORK, FITTINGS AND CONNECTIONS

TWO (2) CHANNEL INDUCTION FURNACES:
  MANUFACTURER:                  BIRLEC
  YEAR OF MANUFACTURE:           1973
  RATING (MAX./MIN.):             600 KW - 530 KW
  POURING CAPACITY:               USABLE - 5000 KG
                                    HEEL - 1700 KG
  NO. OF INDUCTORS:              TWO (2) - AIR COOLED
  POWER CONSUMPTION:             240 KW / TON
  MELTING RATE:                  2.5 TONS/HR. @ 950 DEGREES C.
  ELECTRICAL CONNECT:            415 VOLTS, 3 PHASE, 50 HERTZ

GENERAL EQUIPMENT:
- HYDRAULIC TILTING GEAR W/TWO (2) CYLINDERS CONNECTED TO HYDRAULIC POWER

  PACK. LIMIT SWITCH CONTROL.
- INSTRUMENT (CONTROL) PANEL WITH OPERATOR CONTROL DESK.
- CONTRACTOR PANEL FOR MAIN & STANDBY CONTRACTORS.
- AIR CIRCUIT BREAKER FOR 3 PHASE, 415 VOLTS, 50 HERTZ SUPPLY.
- 720 KVA SCOTT CONNECTED TRANSFORMER GROUP.
- NATURALLY COOLED POWER FACTOR CORRECTION CAPACITORS.
- TWO (2) FANS INCLUDING DUCT WORK.
- FOUR (4) SPARE INDUCTORS - READY TO GO.
- TWO (2) TRANSFER LADLE PLATFORM SCALES (10,000 KG) INCLUDING DIGITAL

  READOUTS, WALL MOUNTED SLAVE READOUTS (LARGE DIGITS) AND PRINTER.
- ALL NECESSARY EQUIPMENT & FORMERS FOR FURNACE BODY & INDUCTOR REBUILDING.

TWO (2) CHANNEL INDUCTION FURNACES (CONT'D):
  MANUFACTURER:                  IN-HOUSE DESIGN
  YEAR OF MANUFACTURE:           1961
  RATING (MIN./MAX.):            176 KW (MAX. 330 KVA - NOMINAL 298 KVA)
  POURING CAPACITY:               USABLE - 1000 KG
                                    HEEL -  600 KG
  NO. OF INDUCTORS:              ONE (1) - FAN COOLED
  MELTING RATE:                  1000 KG/HR.
  ELECTRICAL CONNECT:            415 VOLTS, 3 PHASE, 50 HERTZ

GENERAL EQUIPMENT:
- HYDRAULIC TILTING GEAR W/TWO (2) CYLINDERS CONNECTED TO HYD. POWER PACK.
- INSTRUMENT (CONTROL) PANEL AND OPERATOR CONTROL DESK.
- TAPPING TRANSFORMER (AUTO).
- TWO (2) FANS INCLUDING DUCT WORK.
- ONE (1) STATIC BILLET MOLD CARROUSEL.
- 4 x 8 DEGREE MOLDS - 3 x 10 DEGREE MOLDS
- ALL NECESSARY EQUIPMENT & FORMERS FOR FURNACE BODY & INDUCTOR REBUILDING.


***PLEASE NOTE***
ALL EQUIPMENT IS DISMANTLED AND LYING IN STORAGE

**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**            

 **ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**





























































































Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Country:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

 |  Machinery International Corporation  |  Contact Us  |  Email Sales Department  |  203.484.0400  | 

RETURN to complete inventory display       RETURN to our home page