Machinery International Corporation 20 Commerce Drive
North Branford, CT 06471 USA
Tel: +1 203-484-0400
Fax: +1 203-484-4499
sales@machyintl.com
Spanish Flag French Flag German Flag Chinese Flag

When the symbol appears you may click on it for a picture and/or detailed specifications. The number enclosed in [] is our stock number.

For a quote or more information on the items shown, check the box at the start of the line and fill in your contact information at the bottom of the screen.

0A1920   AIR COMPRESSORS
  GARDNER DENVER, No. RSD 1750A4, COMPRESSED AIR DRYER, 3 PH/60 Hz/460V (13144) [13144]
  WORTHINGTON CORP MODEL BN TWO STAGE COMPRESSOR W/TANK (10178) [10178]

0A2450   AIR COMPRESSORS, ROTARY SCREW/SLIDING VANE
125 PSI, TWISTAIRE, No. TA02584-2, 25 HP,,

0B0704   BALERS, SCRAP METAL
  Model 15000, INTERNATIONAL, SCRAP BRIQUETTER, (12926) [12926]

0B0800   BALL & PEBBLE MILLS
  PAUL O ABBE BALL MILL MODEL A16685 (12703) [12703]

0B1100   BANDING LINES
  SIGNODE, Slit Coil Banding Line (11273) [11273]

0B1150   BAR TURNERS/PEELERS
  1 1/2" (38mm), HETRAN, No. WS-15, BAR PEELER, 4000# COILS (11585) [11585]
  2" (50mm), FARMER NORTON BAR PEELER (13404), [13404]
  10" (254mm), CALOW, DMA 10, BAR PEELER, 60mm - 250mm DIAM. (13372) [13372]

0B1804   BENDERS, PIPE, TUBE & BAR
  1 1/2" (38mm) PINES No. 1, w/ALLEN BRADLEY PANELVIEW 550 CONTROL (13237) [13237]
  1 1/2" (38mm) PINES No. 5T VERTICAL TUBE BENDER, PEDESTAL CONTROL, 20 HP (12022) [12022]
  2 1/4" (57mm) PINES No. 25T VERTICAL TUBE BENDER, 25 HP, WITH CONTROLS (12023) [12023]

0C0875   CASTING MACHINES, BILLET
  3000 Lb/hr AJAX-WYATT DOUBLE RAM TILT INDUCTION FURNACE CASTING LINE (13085) [13085]

0C0926   CASTING MACHINES, CONTINUOUS
  12" (305 mm), ASARCO/ASCAST, CONTINUOUS COPPER BILLET CASTER (12764) [12764]
  GENERAL ELECTRIC CONTINUOUS COPPER ROD DIP FORM CASTING LINE, 36,000 TPY (4006) [4006]
  HAZELETT CONCAST AND ROLL LINE FOR ZINC CALOTS AND ALUMINUM SLUGS (13188) [13188]
  HILL LOMA, CONTINUOUS 7"-15" (180-380mm) VERTICAL COPPER BILLET CASTER (10723) [10723]
  METATHERM HORIZONTAL CONTINUOUS CASTING LINE, 320mm WIDE X 20mm THICK (13112) [13112]
  NEW, 14" (355mm) - 6" (355mm) OCN, 3 STRAND COPPER BILLET, NEVER USED (10509) [10509]
  OUTOKUMPU, 8 X 8MM (5/16") CU ROD UPCASTER, 10,000 TONS PER YEAR (12426) [12426]
  PROPERZI CONCAST LINE TO MELT/CAST/ROLL/COIL ALUMINUM ROD 7.6mm-16mm (13481) [13481]
  RAUTOMEAD, No. 3000, WIRE SIZE 8.0mm - 30mm, 6 WIRES (13405) [13405]
  RAUTOMEAD, No. RS2500/8, 8 RODS UPWARD CONTINUOUS CASTER, NEW 2007 (12425) [12425]
  RAUTOMEAD No. RVS CONTINUOUS CASTER, 2" (50mm) WIDE OR 1/2" 12mm ROUNDS (13457) [13457]
  RAUTOMEAD, No. RVS IIIV, VERTICAL CONTINUOUS CASTER, FOR GOLD/SILVER (13313) [13313]
  TECHNICA, CONTINUOUS NON-FERROUS 8"-10" (200-250mm) BILLET CASTER (10766) [10766]
  COPPER ROD CONCAST/ROLL LINE FOR 8mm (.314") ROD (13153) [13153]
  9" (228mm) 12 STRAND ALUMINUM BILLET CASTER (10260) [10260]

0C1350   CHAMFERING MACHINES
  1/4" (6mm) - 7/8" (22mm) GUARIENTI DOUBLE HEADED CHAMFERING AND CUTTING (13390) [13390]
  1" (25mm) - 2.5" (65mm) GUARIENTI DOUBLE HEADED CHAMFERING & CUTTING (13392) [13392]
  3 1/8" (79mm) Max. Cap., LNS, No. PB80, BAR CHAMFERING MACHINE, 2HP (13219) [13219]
  5/16" (8mm) - 1.57" (40mm) SAS DOUBLED HEADED CHAMFERING, 45 DEG. ANGLE (13391) [13391]

0C3145   COIL END JOINERS
  72"(1828mm)x .375"(9.5mm) COIL END JOINING WELDER, HOBART 300 AMP WELDER (12264) [12264]

0C3708   COMPACTORS
  PACK-MASTER, No. 10001259, AIR POWERED COMPACTOR (12828) [12828]

0C3865   COMPLETE PLANTS
  AVAILABLE FOR IMMEDIATE PURCHASE ALUMINUM/BRASS ROD MILL OPERATION (11708) [11708]
  COPPER TUBE PLANT LIQUIDATION (13438) [13438]
  HAZELETT CONCAST AND ROLL LINE FOR ZINC CALOTS AND ALUMINUM SLUGS (13190) [13190]
  COMPLETE PLANT TO MAKE 55 GAL. (208 LITER) STEEL DRUMS (13502) [13502]
  COMPLETE BRASS & SANITARY FITTINGS PLANT FOR FAUCETS, FIXTURES, ETC. (10068) [10068]

0C6306   CRANES, BRIDGE & OVERHEAD
  7.5 Ton (6804 Kg) x 60' SPAN, SHEPHERD NILES TOP RUNNING DOUBLE GIRDER (13089) [13089]
  25 Ton (22680 Kg), ACE, 6' (2m) TROLLEY GAUGE, 25' (7.6m) LIFT, CLASS D (13508) [13508]

0C8030   CUT-OFFS, PIPE, TUBE & BAR
  1 1/4" (31mm), FENN MFG, MODEL 125 IMPACT CUTOFF W/20'-0" LONG BAR FEED (13183) [13183]

0C8090   CUT-TO-LENGTH LINES
  18" (457mm) x .187" (4.75mm) HALLDEN CUT-TO-LENGTH LINE, LEVELER, SHEAR (13401) [13401]
  48" (1219mm) x 1/4" (6.3mm), AMERICAN STEEL LINE, 10,000# COIL (11051) [11051]
  50" (1270mm) x 0.052" (1.32mm) B & K, CUT-TO-LENGTH LINE (10596) [10596]
  60" (1524mm) x .135" (4.75mm), ROWE, STACKER FOR CUT-TO-LENGTH LINE, (12041) [12041]
  63" (1600mm) x .120" (3mm) UNGERER, CUT-TO-LENGTH LINE (11406) [11406]

0D0654   DEBURRING MACHINES
  1/4" (6mm) - 3/4" (19mm) TUBE BRUSH DEBURRING, 18" - 50" L., AUTO-LOAD (2937) [2937]

0D3375   DRAW BENCHES
  2,000 Lb. (907 Kg) SINGLE DIE DRAWBENCH, 12 FT. (3.6m) DRAW, HYD. PULL (13466) [13466]
  20,000 Lb. (9071 Kg) 2 DIE HYDRAULIC DRAWBENCH, 45 FT. (13.7m) DRAW (13467) [13467]
  24,000 Lb.(12 TON) 2 1/4"- 1 1/4" (58mm-32mm) SCHUMAG CASCADE TUBE DRWNG (13350) [13350]
  25,000 Lb. (12.5 Ton), AETNA STANDARD/MONTBARD, 3 DIE DRAWBENCH (12897) [12897]
  30,000 Lb. (13,600 KG), LOMBARD, 3 DIE TUBE DRAWBENCH, 100 FT (30M) DRAW (13482) [13482]
  30,000 Lb. (15 TON) OTT 3 DIE FOR TUBE, 40' (12m) ENTRY, 50' (15m) L (13387) [13387]
  30,000 Lb. (13,600 KG), VAUGHN, 3 DIE, MULTI-DIE CHAIN TYPE FOR TUBE (13499) [13499]
  40,000 Lb. (20 TON) BIGWOOD, SINGLE CHAIN, 29.5' (9M) DRAW LENGTH, 35 HP (12459) [12459]
  50,000 Lb. (25 TON) BROOKES, 36' (11M) L. DRAW, 2-1/2"-1/2" BAR, 100 HP (12458) [12458]
  65,000 Lb. (30 Tons), MONTBARD, 1985, 3 DIE TUBE DRAWBENCH, 36m DRAW (12585) [12585]
  66,000 Lb. (30 M/TON), BULTMANN, 1990/2010, DRAW LENGTH 45' STEEL TUBE (13507) [13507]
  100,000 Lb.(45,360 KG), AETNA STANDARD, 3 DIE DRAWBENCH TUBE 1.4" - 4.3" (13347) [13347]
  100,000 Lb. HEAD WRIGHTSON DRWBNCH FOR BAR, 32' (9.7m) SINGLE DRAW, (13365) [13365]
  150,000 Lb. (75 TON) OCN 1 DIE FOR TUBE, ENTRY 50' (15m) 60' (18m) L (13388) [13388]
  200,000 Lb. (90,718 Kg), AETNA STANDARD, 3 DIE DRAWBENCH TUBE (13348) [13348]

0D7553   DRYERS
  CORECO SWARF DRYER (12464) [12464]
  REFRIGERATED AIR DRYER MODEL NCH500W-4 (12704) [12704]

0E1503   EDGING LINES
  4" (101mm) COILPRO, SKIVING/EDGING LINE, .003"-0.050" THICKNESS (11202) [11202]
  3" (76mm) RUESCH No. 270 POWER DRIVEN EDGING LINE (8002) [8002]
  6" - 4" (152mm-101mm) TISHKEN No. ST2-C02, 2 STAND, RE-SHAPING & CUTOFF (12686) [12686]
  6" - 3 1/2" (152mm-89mm) TISHKEN No. STR-30-002-HWA FLATTENING & CUTOFF (12688) [12688]
  11"- 4.5" (279mm-114mm) TISHKEN No. STR-FLS-2 WIRE FLATTEN, STR & CUTOFF (12685) [12685]
  6" - 3 1/2" (152mm-89mm) TISHKEN No. STR30-C0-2HW WIRE FLATTEN & CUTOFF (12687) [12687]
  18" - 4" (457mm-100mm) EDGING LINE, TO FLATTEN & CONTOUR EDGE STRIP (10825) [10825]

0F5006   FURNACES
  108"(2743mm)W. x 84"(2134mm)H. x 216"(5486mm)L. RAPID TECHNOLOGY, 2300F (11729) [11729]
  12"(304mm) x 8"(203mm) x 144"(3657mm), C I HAYES, CONTINUOUS, MAX 2100F (12305) [12305]
  37" (39mm) D x 25" (635mm) H x 52" (1320mm) W., CORBETT IND., ELECTRIC (12816) [12816]
  36"(914mm) W. x 48"(1219mm) H. x 36"(914mm) L., GRIEVE, TOP LOADING BOX (13418) [13418]
  24" (610mm) W. x 20" (508mm) H. x 48" (1219mm) L. LINDBERG BOX FURNACE (13396) [13396]
  6" (152.4mm) MASTERFLOW BELT FURNACE (13452) [13452]
  OLIMPO MECCANICA, 850C, STATIC ANNEALING W/WATER QUENCH, (13462) [13462]
  PARAGON MODEL RG18-1 HEAT TREAT OVEN, 1700F (12800) [12800]
  18" (457mm) W x 20" (508mm) H x 20" (508mm) D, PYRADIA, BOX, 2000F, (13456) [13456]
  32" (813mm) W. x 18" (457mm) H. x 36" (914mm) L., R & G SERVICES, 2100F (13417) [13417]
  20"(508mm)Hx 32.5"(825.5mm)Wx 80"(2032mm)L ROLOCK GAS OVEN W/QUENCH TANK (12799) [12799]
  6" (152.4mm) SM ENGINEERING BELT FURNACE 1800 DEGREES F (13451) [13451]
  6" (152.4mm) SM ENGINEERING BELT FURNACE (13450) [13450]
  33"(838mm)D. x 44"(1117mm)W. x 54"(1371mm)H., VACUUM SHELF DRYER (12819) [12819]

0F5218   FURNACES, ANNEALING, STRIP
  36" (914mm)H x 42" (1066mm)OD S&M ENGINEERING PIT TYPE BELL ELECTRIC (113623) [13338]

0F5276   FURNACES, BELL TYPE
  42" (1067mm)Dia x 36"(914mm)H., S&M, PIT BELL TYPE ELECTRIC ANNEALING (13368) [13368]
  59" (1500mm) Dia x 98" (2500m) H, CEBA, BELL, 850 Deg C (1560 Deg F) (12678) [12678]
  76" (1829mm) Dia x 126" (3200mm) H., RAD-CON, BELL ANNEALING FURNACES (13440) [13440]

0F8175   FURNACES, ROLLER HEARTH
  57"(1448mm)W x 16"(406mm)H x 57"L RIPOCHE COPPER TUBE (COILS) 3 ZONE (12597) [12597]

0F8650   FURNACES, STRAND ANNEALING
  4 STRAND BERTONCELLO MAX TEMP 950C, INERT ATMOSPHERE (13463) [13463]
  6 STRAND CONTROL APPLICATION STRAND ANNEALER COOLING SECTION (12801) [12801]

0F8704   FURNACES, STRIP ANNEALER
  5" (127mm), C I HAYES, STRIP ANNEALING FURNACE, STRIP WIDTH 1/2"- 5" (12-127mm) [13335]
  13 1/2" (343mm), THERMAL BASICS ANNEALING FURNACE, STRIP WIDTH 1"- 13-1/4" [13337]

0F9004   FURNACES, VACUUM
  IONEX, 50 lbs MAX, VACUUM INDUCTION MELTER (12858) [12858]

0G4306   GRINDERS, CENTERLESS
  CINCINNATI No. 220-8 CENTRAMIC GRINDER, AUTO BALANCE, ELECTRO-HYD INFEED (13413) [13413]
  0.118 - 3.9" CINCINNATI, Model 3-500 TWIN GRIP 3mm-150mm (13496) [13496]
  RV 635, SCHUMAG, SCHLEIPO II, RANGE 5-40mm (0.196"-1.57") DIA (13506) [13506]
  SCHLEIPO II, SCHUMAG, 1/4" (6mm) - 1.18" (30mm) (13497) [13497]

0G7426   GRINDERS, ROLL
  36" (914mm) x 166" (4216mm), FARREL, CNC, WHEELHEAD 40 HP (12851) [12851]
  36" (914mm) x 189" (4800mm), CHURCHILL, No. FB, CYLINDRICAL/ROLL GRINDER (12848) [12848]
  36" (914mm) x 244" (6200mm), FARREL, 2-WHEEL TYPE, 20" GRINDING WHEELS (13512) [13512]
  43" (1100mm) x 216" (5500mm), CHURCHILL, No. TWB, 1976, HEAVY DUTY ROLL GRINDER [12847]
  48" (1219mm) x 378" (9601mm) FARREL DUAL WHEEL ROLL GRINDER (10145) [10145]
  70" (1778mm) x 425" (10m) NAXOS UNION No. W 1800/11500 ROLL GRINDER, 20-50 TON [12582]

0G7960   GRINDERS, SURFACE, N/C & CNC
  VANGROENWEGHE TURBOGRINDER TYPE T-300-2K BELT GRINDING MACHINE (13095) [13095]

0G8025   GRINDERS, SURFACE, RECIPROC. TABLE (HOR. SPDL.)
  6" (152mm) x 12" (304mm) BOYAR-SCHULTZ SURFACE GRINDER (13164) [13164]
  6" (152mm) x 12" (304mm) BOYAR-SCHULTZ SURFACE GRINDER (13165) [13165]
  REID BROTHER MODEL 618 HYD PRECISION SURFACE GRINDER (13461) [13461]

0I4806   INSPECTION EQPT.(Incl.e-beam & optical mics)See al
  10-A THICKNESS, PRATT & WHITNEY, MAGNETIC CONTINUOUS THICKNESS GAUGE (6402) [6402]
  C-1 WIDTH GAGE, PRATT & WHITNEY, ELECTROLIMIT CONTINUOUS WIDTH GAGE (11993) [11993]
  C-1 WIDTH GAGE, PRATT & WHITNEY, ELECTROLIMIT CONTINUOUS WIDTH GAGE (11994) [11994]
  VBK 563 I/E/SU 2X20 MUBE/DAV VOLLMER CONTACT GAUGE WITH VMF1000/305 BASE (12633) [12633]
  ZUMBACH LASER MICROMETER W/2 PLANE DIA @ POSITION MONITOR (7849) [7849]
  VMF 3/90, VOLLMER, CONTACT THICKNESS GAUGES (7341) [7341]

0L4304   LATHES, PRECISION, JEWELERS, TOOLROOM, Etc.
  5" (127mm) x 12" (305mm) SHELDON MODEL EL-38-B TOOLROOM LATHE (11170) [11170]

0L6954   LEVELERS (ROLLER / PLATE & STRETCH)
  4-1/2" (114mm) 4-HI ROLL LEVELER, 9 OVER 10 ROLL CONFIGURATION, 3/4 HP (12574) [12574]
  7" (178mm) x 7/8" (22mm) KOHLER 19 ROLL LIGHT GAUGE STRIP LEVELER (12173) [12173]
  7" (178mm) x 7/8" (22mm) BRUDERER 19 ROLL BACKED UP LEVELER (12018) [12018]
  8" (203mm) x 1 1/2" (38mm) PERFECTO MODEL 28-8-7, 7 ROLL LEVELER (11780) [11780]
  9" (228mm) x 1-7/8" (47mm) WATERBURY FARREL, 9 ROLL LEVELER (11181) [11181]
  12" (305mm) RUESCH, 9 ROLL CONFIGURATION 4 OVER 5, ENTRY GUIDE ROLLS (12794) [12794]
  30" (762mm) x .021" (0.53mm) BRADBURY 11 ROLL AUTO-CORRECT HYD LEVELER (13408) [13408]
  34" (863mm), UNGERER 17 ROLL LEVELER, BACKED UP, 4-HI, NO MOTOR (11271) [11271]
  42" (1066mm) HERR VOSS VLMB 17 ROLL 4-HI PRECISION LEVELER (13098) [13098]
  60" (1524mm) x 0.135" (3.4mm) ROWE FLATTENER (13415) [13415]
  118" (2997mm), FRORIEP, 7 ROLL LEVELER, 4 OVER 3, THICKNESS 1.182" (11975) [11975]
  126" (3200mm) x 2" (50mm), SKET PLATE LEVELER, SPEED 9m/MIN. (7751) [7751]
  126" (3200mm) x 2" (50mm), SKET PLATE LEVELER, SPEED 9m/MIN (7752) [7752]

0L7070   LEVELERS, TENSION
  5" (127mm) W., REDEX COIL-TO-COIL TENSION LEVELING LINE (13435) [13435]
  17" (430mm) x .02" (.5mm), MCKAY, TENSION LEVELING LINE (13224) [13224]
  17 1/2" (450mm) x .004" (0.1mm), LEVELER, REBUILT 2019, STAINLESS STEEL (13490) [13490]
  56" (1422mm) STAMCO-HUNTER TENSION LEVELER, THICK 0.050"-0.003" (13385) [13385]

0M4125   MOTORS, A.C., HORIZONTAL, 3 PHASE, 60 CYCLE
  75 HP, 1185 RPM, 460 V., EMERSON INDUCTION MOTOR, Frame 405T, (12863) [12863]

0O8400   OXYGEN EQUIPMENT (BLENDERS, CONCENTRATORS, TANKS,
  AIRSEP, AS-E(190) OXYGEN CONCENTRATOR (13464) [13464]

0P1050   PICKLING LINES
  50" (1346mm), SUMITOMO, (2000 Kg), PICKLING LINE STEEL STRIP (12273) [12273]

0P3880   PRESSES, COINING, MINT COINING
  30 Ton PETEX TRAT OBI PUNCH PRESS 3 HP (13455) [13455]
  360 Ton, HME, No. K360, COINING PRESS, 45 SPM, 2 3/8" STROKE (12140) [12140]

0P4425   PRESSES, EXTRUSION
  100 Ton, COLLIN, DOUBLE ACTING, 2 COLUMN, 50mm DIA X 120mm L BILLETS (12850) [12850]
  800 Ton, UBE, NEW 1979-UPDATE 2008, EXTRUSION PRESS (13073) [13073]
  1000 Ton, FIELDING, WATER HYDRAULIC VERTICAL EXTRUSION PRESS (12964) [12964]
  1250 Ton, LAKE ERIE, BILLET DIA 150mm, BILLET LENGTH 610mm (10044) [10044]
  1250 Ton, SUTTON ALUMINUM EXT. PRESS, FURNACE, SHEAR, SAW, STRETCHER (13509) [13509]
  1500 Ton, KOBEL CO, HYDRAULIC EXTRUSION PRESS, BILLET 6.9" X 32" (13212) [13212]
  1500 Ton, LOEWY, DIRECT OIL HYD, FOR BRASS ROD, 6-8"(203mm) DIA. BILLETS (12831) [12831]
  1800 Ton, LOMBARD, EXT SPEED 1.5 - 38mm/sec. 150/203mm BILLET DIA (12457) [12457]
  1850 Ton, BALDWIN INNOCENTI, (Rebuilt 1999), ALUM EXT PRESS, 7" (178 mm) (12053) [12053]
  2000 Ton, SIDDHARTH, 1996, EXTRUSION PRESS FOR COPPER TUBE (10346) [10346]
  2000 Ton, WATSON STILLMAN, WATER HYDRAULIC BRASS ROD EXT PRESS (13086) [13086]
  2500 Ton, CLECIM, ALUMINUM OIL HYDRAULIC HORIZONTAL EXTRUSION PRESS (13193) [13193]
  2800 Ton, LOEWY, EXT PRESS w/PIERCER, 8"(207mm) x 26"(660mm) COPPER (13342) [13342]
  3000 Ton, LOEWY, ALUMINUM EXTRUSION PRESS, REFURBISHED 2008, OIL HYD (13317) [13317]

0P4728   PRESSES, FORGING
  3000/4000 Ton, KOBE, Open Die Forging Press, 82" (2100mm) Stroke, (13261) [13261]

0P5102   PRESSES, HYDRAULIC
  150 Ton, PHI, 12"Str, 15"DLO, 4 POST HYDRAULIC PRESS (13071) [13071]
  200 Ton, MODERN, 4 1/2" (114mm) Str, 14 1/2" (368mm) DLO, 4 POST HOBBING PRESS [13070]
  300 Ton, LOUIS, 18"Str, 4 POST, COMPACTING TYPE, HYDRAULIC PRESS (13072) [13072]
  1000 Ton, BLISS, MODEL HS-1000-H-48 X 48, 24"Str, 40"DLO, 48" x 48" BED (13433) [13433]
  1200 Ton, HPM MODEL CU-2D, 48"Str, 96"DLO, 84" x 60" BED (13432) [13432]

0P5298   PRESSES, HYDRAULIC, STRAIGHTENING
  75 Ton, WATSON STILLMAN, VERTICAL STRAIGHTENING PRESS (13092) [13092]

0P6209   PRESSES, O.B.I., FLYWHEEL, SINGLE CRANK
  30 Ton (30,000 Kg), CAMER, OBI PRESS, OPEN BACK INCLINABLE w/FLYWHEEL (13453) [13453]
  30 Ton, V & O, OBI PUNCH PRESS, OPEN BACK INCLINABLE (13454) [13454]

0P6226   PRESSES, OPEN BACK, NON-INCLINABLE
  75 Ton, DANLY, MODEL No. 75, AIR CLUTCH, OBI PRESS, 40-80 SPM (13491) [13491]

0P7198   PRESSES, STRAIGHT SIDE, SINGLE CRANK (Sgl. Action)
  2000 Ton, DANLY, SSSC PRESS (13024) [13024]

0R0997   RECOILERS
  2,000 Lb. (907 Kg), PROGRESSIVE, No. 620-SM-RH, TRAVERSING TAKE-UP (10579) [10579]
  2,500 Lb. (1135 Kg) TORRINGTON, 16"(406mm) DIA. x 17.5"(445mm) FACE DRUM (12528) [12528]
  3,000 Lb. (1360 Kg), FENN, 24" x 10", CHAIN DRIVEN, MANUAL EXPANSION (11705) [11705]
  10,000 Lb. (4535 Kg) PAXSON, 16" (406mm) DIA. x 42" (1066mm) FACE DRUM (11871) [11871]
  10,000 Lb. (4535 Kg) RUESCH, 16" (406mm) DIA. x 30" (762mm) FACE DRUM (11869) [11869]
  15,000 Lb. (680 Kg), (1066mm) DIA. x 20" (508mm) DRUM, 20 HP, 240 V (12529) [12529]
  20,000 Lb. (9072 KG) x 48" (1219mm) PAXSON, W/OVERARM SEPARATOR, 60 HP (6583) [6583]
  20,000 Lb. (9072 kg) x 40" w. PAXSON, 17/18/20 ID, 40HP DC, SLIDING BASE (10609) [10609]

0R5603   ROLLS,PLATE BEND'G,INIT.& DBL.PINCH TYPE(Incl.Shee
  12' x 4", BERTSCH, No. 36, 14 Ft. x 4" Thick Bertsch Hydraulic Plate Bending Roll, 36" Roll Diameter, 300 HP, Max. Plate Thickness 6" @ 48" Wide or [11928]
  12' (3657mm) x 4 1/16" (103mm), BERTSCH, No. 36, HYD. PLATE BENDING ROLL (11928) [11928]

0R6448   ROLLING MILLS, BAR & ROD
  4" (101mm) x 8" (203mm) W., FIOA 2-HI ROD MILL, .325"- .040" MOD. SQUARE (12651) [12651]
  5" (127mm) x 9" (228mm) W., STANDARD, 2-HI ROD MILL, (12945) [12945]
  6" (152mm) x 12" (304mm) W., STANDARD, 2-HI, .875" TO .040" MOD. SQUARE (12650) [12650]
  7" (177mm) x 2" (50mm) W. WATERBURY FARREL 10 STAND ROD MILL WITH COILER (11357) [11357]
  8" (203mm) x 10" (254mm) W., LOMA, No. 1000, ROD/FLAT PRODUCT MILL (12428) [12428]
  8" (203mm) x 14" (355.6mm) W., WATERBURY FARREL, 15 HP, GROOVED ROLLS (13369) [13369]
  12" (305mm) x 28" (712mm) W., STANDARD, 2-HI ROD MILL, (12946) [12946]
  12" (305mm) x 36" (914mm) W., STANDARD, 2-HI ROD MILL, (12947) [12947]
  BUEHLER, 6 STAND TANDEM ROD MILL, 16mm - 8mm (0.629"- 0.314") (12925) [12925]
  STANDARD, 6 STAND TANDEM WIRE ROD .425"-.110" (10mm-2mm) Cap., 3 GROOOVE (12637) [12637]
  SUMITOMO, 32 STAND ROD MILL FOR STAINLESS 5.5mm-1.2mm (.216"- .048") (13357) [13357]
  REBAR MANUFACTURING LINE (NEW) [12144] [12144]
  HOT ROLLING MILL PLANT FOR ROUND BAR (12311) [12311]

0R7003   ROLLING MILLS, SENDZIMIR
  8 1/2" (216mm) WATERBURY FARREL ZR 15 8 1/2, SENDZIMIR ROLLING MILL (1610) [1610]
  8-1/2" (216mm) WATERBURY FARREL ZR16-8 1/2, 30HP DRIVE, 15HP RECOILERS (10018) [10018]
  8-1/2" (215mm) WATERBURY FARREL ZR16-8 1/2 SENDZIMIR MILL (11212) [11212]
  10" (250mm) SUNDWIG 12-HI COLD REVERSING, COPPER ALLOYS (13487) [13487]
  11" (280mm) HITACHI ZR24-11 1/4, SENDZIMIR 20-HI COLD MILL (13486) [13486]
  14" (355.6mm) RUESCH SENDZIMIR Z-HIGH REVERSING ROLLING MILL (13287) [13287]
  18" (450mm) SENDZIMIR ZR 16-18, 12-HI COLD REVERSING MILL (13239) [13239]
  25" (635mm) SENDZIMIR ZR19-25, 12-HI COLD REVERSING MILL, STAINLESS (13051) [13051]
  26" (660mm) WATERBURY FARREL ZR22B-26, 20-HI SENDZIMIR REVERSING (13352) [13352]
  39" (1000mm) DEMAG SENDZIMIR, THICKNESS 0.078" (2mm) - 0.0037" (0.095mm) (13477) [13477]
  48" (1219mm) HITACHI 20-HI SENDZIMIR MILL, 4mm THICK x 1030mm WIDE (12399) [12399]
  49" (1244mm) INNOCENTI ZR22-49 SENDZIMIR 20-HI COLD ROLLING MILL (11470) [11470]
  52" (1321mm) DMS ZR22-BBS-52, 20-HI SENDZIMIR MILL (13334) [13334]

0R7045   ROLLING MILLS, 2-HI
  3" (80mm) X 2" (50mm) MARIO DI MAIO MODEL LSP 80X50 (13460) [13460]
  3" (76mm) x 5" (127mm) CAVALLIN, 2-HI ROLLING MILL, 220V AC (12976) [12976]
  3" (76mm) x 5" (127mm) STANAT MODEL FX-100 2-HI ROLLING MILL (12702) [12702]
  4" (101mm) x 6" (152mm), IRM, 2 HIGH REVERSING ROLLING MILL (13437) [13437]
  5" (127mm) X 7/8" (22.2mm) MGZ EQUIPPED WITH SHELL ROLL WIRE FLATTENING (13459) [13459]
  5" (127mm) x 8" (203mm), FENN 2/4-HI REVERSING MILL w/RECOILERS, 20 HP (12797) [12797]
  5" (127mm) x 8" (203mm) McWILLIAMS, 2-HI ROLLING MILL (13424) [13424]
  5" (127mm) x 8" (203mm), STANDARD, 2-HI ROLLING MILL (12653) [12653]
  5 1/2" (140mm) x 6" (152mm) MARSHALL RICHARDS, 10 HP DC, WINDERS (11983) [11983]
  6" (152mm) x 6" (152mm) STANAT, HEATED ROLLS, 20 HP DC, HYD SCREWDOWN (12914) [12914]
  8" (204mm) x 8" (204mm) FENN 2 HI, 20 HP DC, 500 VOLTS (13364) [13364]
  10" (254mm) x 10" (254mm), FENN, MODEL 101, 2-HI ROLLING MILL (13356) [13356]
  10" (254mm) x 12" (305mm) WATERBURY FARREL, 30 HP DRIVE (13189) [13189]
  12" (305mm) x 12" (305mm) CANADIAN IRON, HAND WHEEL ADJUSMENT, 50 HP AC (13225) [13225]
  12"(300mm) x 14"(350mm) CARL WEZEL, PRECISION, AGC, HYD. SCRWDN, VOLLMER (4228) [4228]
  13-3/4" (350mm) x 24" (610mm), MINO REVERSING, 67 Kw MOTOR, COILER 20 Kw (12905) [12905]
  16" (406mm) x 18" (457mm), STANDARD, 75/100HP, MOTORIZED SCREWDOWN (10675) [10675]
  16" (400mm) x 24" (600mm) GRISET 2-HI COLD BREAKDOWN MILL, 220 HP (13402) [13402]
  16" (400mm) x 39" (1000mm), KRUPP, 130kw, (13511) [13511]
  18" (457mm) x 65" (1650mm), WEAN UNITED, 2-HI REV, 50 HP, 230 VAC (13104) [13104]
  20"(500mm) x 34" (860mm), WATERBURY FARREL, 75/195 MPM (13510), [13510]
  22" (558mm) x 33" (838mm), 2-HI TEMPER PASS MILL (13353) [13353]
  22" (558mm) x 40" (1016mm), LEWIS, 2 HI NON REVERSING, 200 HP, 600 FPM (13185) [13185]
  24" (609mm) x 72" (1828mm), GARRISON 2-HI ROLLING MILL, 300 HP (12404) [12404]
  25"(635mm) x 42"(1066mm) WATERBURY FARREL NON-REV, STAINLESS 37"(939mm)W (13129) [13129]
  26" (660mm) x 53" (1346mm), SACK, SKIN PASS 2-HI ROLLING MILL (12455) [12455]

0R7097   ROLLING MILLS, 2-HI, TANDEM
  12" (304mm) x 8" (203mm) STRILICH, 3 STAND, 15 HP PER STAND (12413) [12413]

0R7240   ROLLING MILLS, 2/4-HI
  1 1/2" (38mm) x 5" (127mm) x 6" (152mm) STANAT, MODEL TA 315 (13186) [13186]
  1 1/2" (38mm) x 5" (127mm) x 8" (203mm) FENN REVERSING, 10 HP AC (12649) [12649]
  4" (101mm) x 6" (152mm), STANAT, MODEL TA-215, 2/4 HIGH (13366) [13366]
  5" (127mm) x 8" (203mm) FENN, REVERSING WITH COILERS (NO 4-HI STACKS) (12785) [12785]
  6" (152mm) x 16" (406mm) x 14" (355mm) CARL WEZEL, REVERSING (10780) [10780]

0R7604   ROLLING MILLS, 4-HI
  1 1/2" (38mm) x 6" (152mm) x 6" WATERBURY FARREL, CONTACT GAUGE RECOILER (10019) [10019]
  1-7/8"(47mm) x 8"(203mm) x 8" FENN, DUAL HANDWHEEL SCREWDOWN, REC/PAYOFF (6533) [6433]
  2 1/2" (63.5mm) x 5"(127mm) x 8"(203.2mm), FERRARA, 10 HP (13449) [13449]
  2 1/2" (63.5mm) x 8" (203mm) x 10" (254mm) RUESCH, REVERSING (13332) [13332]
  3 1/2" (90mm) x 17" (430mm) x 24" (600mm) SCHLOEMANN MKW-40 2/4-HI MILL (13403) [13403]
  3 1/2" (91mm) x 18 1/2" (470mm) x 24" (610mm), SCHLOEMANN MKW, 4-HI REV (13131) [13131]
  4" (101mm) x 16" (400mm) x 14" (350mm), FROHLING, REVERSING, 2400KG (13488) [13488]
  4 3/4" (120mm) x 22" (560mm) x 24" (610mm), UNITED, 4-HI ROLLING MLL (13308) [13308]
  5" (127mm) x 10" (254mm) x 10" STANAT NON REVERSING BONDING MILL 25HP DC (10647) [10647]
  5" (127mm) x 17" (430mm) x 15 3/4" (400mm) SCHMITZ 4-HI REVERSING, AGC (13434) [13434]
  5 1/2" (140mm) x 12" (305mm) x 12 1/2" (317mm), ROBERTSON, 4-HI REV MILL (12476) [12476]
  5-1/2"(140mm) x 12"(325mm) x 24"(600mm) MINO REV, 67Kw MOTOR/18Kw COILER (12906) [12906]
  5 1/2" (140mm) x 15" (381mm) x 12" (304mm) FENN, 0/600 FPM (182 m/min) (12499) [12499]
  6 1/4"(158mm) x 10"(254mm) x 27"(686mm) x 32"(813mm) 6 HIGH ROLLING MILL (13371) [13371]
  6-5/8" (170mm) x 16" (400mm) x 13-3/4" (350mm) SCHMITZ 4-HI ROLLING MILL (12980) [12980]
  7" (178mm) x 20" (508mm) x 22" (558mm) FARMER NORTON, 4-HI REVERSING (13132) [13132]
  7" (178mm) x 20" (610mm) x 25" (635mm) 4-HI REVERSING COLD FOIL w/AGC (13389) [13389]
  12" (304mm) x 29-1/2" (749mm) x 20" (508mm) UNITED REVERSING, 1212 FPM (12602) [12602]
  15" (380mm) x 36" (915mm) x 59" (1500mm) ALUMINUM 4-HI NON-REV MILL (13441) [13441]
  16" (406mm) x 39" (990mm) x 48" (1219mm) SKODA, 1400kw DRIVE MOTOR (11978) [11978]
  16" (406mm) x 40" (1030mm) x 32" (800mm) SKODA, 0.314" (8mm) THICK INPUT (13216) [13216]
  20" (508mm) x 50" (1270mm) x 56" (1422mm) UNITED 4-HI REVERSING MILL (12174) [12174]

0S0653   SAWS, BAND, HORIZONTAL
  12" (305mm) x 12" (305mm), HEM 1000AH, HORIZONTAL BAND SAW (13210) [13210]

0S0690   SAWS, BAND, VERTICAL
  1" (25mm) W. x 116" (2946mm) L., NORTH AMERICAN, DRIVEN (11269) [11269]
  GROB, MODEL 4V-18, 28" (711mm) x 24" (609mm) TABLE (13265) [13265]

0S0805   SAWS, COLD & CARBIDE
  3" (76mm), CIRCULAR TUBE CUTOFF, 3.14" (80mm) O.D., 13.7" (348mm) BLADE (5667) [5667]
  18" (457mm) DIA. BLADE, LOMA No. KE-3 CROSS CUT TYPE, 72" (1828mm) TRAVEL (4720) [4720]

0S0825   SAWS, COLD & CARBIDE (NON-FERROUS)
  8 1/4" (209mm) or 12 1/2" (317mm) Blade, WAGNER MODEL 200, CUTOFF (13094) [13094]

0S1504   SCALES
  110,000 Lb. (50 Tons), TRAYVOUS, No. TY50, 2002, TRUCK SCALE (12598) [12598]

0S1837   SCRAP WINDERS
  SCRAP BALLER, Power Driven, 19" (484mm) W. x 20" (508mm) Dia., 40HP (13256) [13256]

0S4128   SHEARS, REBAR & BAR
  HYDRAULIC SCRAP SHEAR FOR ROD, 1" (25mm) DIA. COPPER, (12949) [12949]

0S5054   SHOT BLAST/PEENING, AIRLESS
  TUBE I.D. SHOTBLASTER FOR 2 1/4" (60mm) - 1/4" (6mm) TUBE (12601) [12601]

0S5456   SLITTING LINES
  6" (152mm) x 3 1/4" (82mm), WATERBURY FARREL, MODEL No. 2, 7.5 HP (12791) [12791]
  6 1/2" (165mm) x 1 1/4" (31.7mm), RUESCH, 189, RING TYPE (13187) [13187]
  8" (203mm) x 3 1/4" (82mm) WATERBURY FARREL SLITTING LINE (10354) [10354]
  10" (254mm) x .0118" (.299mm) x 20,000# FROHLING SLITTING LINE (12021) [12021]
  10" (254mm) x 4" (101mm) RUESCH RING SLITTER, 7 1/2 HP, 220/440 VOLT (11770) [11770]
  10" (254mm) x 2 5/8" (66mm) WATERBURY FARREL SLITTING LINE (12069) [12069]
  10" (254mm) x 2 1/2" (63.5mm), 2000 LB. COILS, w/DUAL TAKE-UPS (12674) [12674]
  12" (305mm), FERRARA, 5 HEAD TRAVERSE WIND & SLITTING LINE (13302) [13302]
  12" (305mm) x 2-1/2" (63mm), NOBS, SLITTING LINE, .157" (4mm) Thk Cap. (13331) [13331]
  12" (304mm) x 2 1/2" (63mm) RUESCH No. 76, 2000 LB. COILS, DUAL WINDERS (12673) [12673]
  12" (304mm) x 2 1/2" (63mm) RUESCH No. 76 SLITTING LINE w/DUAL WINDERS (13035) [13035]
  14" (355mm) x 3" (76mm), RUESCH, 149, 2,000 LBS. COILS, SLITTING LINE (13182) [13182]
  16" (406mm) x 3 1/4" (82mm), SLITTING LINE (13176) [13176]
  18" (459mm) x 4 1/4" (108mm), STANAT, LOOP SLITTING LINE (12951) [12951]
  20" (508mm) x 3.75" (95mm) x 10,000 Lb. (4535 Kg), PAXSON, SLITTING LINE (12467) [12467]
  24" (609mm)x 4-1/8" (105mm) RUESCH No. 146, THICK 0.015"-0.093" PULLTHRU (10587) [10587]
  24" (609mm), RUESCH, No. 146, RING SLITTING LINE, 6000 LB. COILS (12672) [12672]
  24" (610mm) x 4 1/8" (104mm), RUESCH, No. 146, LOOPING PIT RING (12681) [12681]
  24" (609mm) x 6 1/2" (165mm) RUESCH SLITTING HEAD, 125 HP (10610) [10610]
  24" (610mm), RUESCH, PRECISION DOUBLE LOOP RING SLITTING LINE, 15000 LB. (13349) [13349]
  30" (762mm) x 4-1/4" (108mm), TORRINGTON, SLITTING LINE (12430) [12430]
  36" (914mm) x 5" (127mm) PAXSON, 20,000 Lb. COILS, 3 HEADS, TOOLING (11230) [11230]
  36" (915mm) x 4 1/4" (108mm) x 10,000 LB. (4536 KG) PAXSON SLITTING LINE (11955) [11955]
  36"(914mm) STANAT S-5-36, 5"(127mm) ARBOR, UNC./SLITTER HEAD/SCRAP WINDER (7185) [7185]
  36" (914mm) x 4" (101mm) YODER, 10,000#, 36" WIDTH, 0.005"-.095" THICK (11295) [11295]
  36" (915mm) x 4-1/2" (114mm) YODER MODEL M2, 10,000# COILS, (NO RECOILER) (6050) [6050]
  36" (915mm) x 4-1/2" (114mm) YODER, W/UNCOILER (NO RECOILER) (7718) [7718]
  36" (915mm) x 5" (127mm), YODER, 15,000 LB. (6800 KG) UNCOILER, 40 HP (11458) [11458]
  36" (915mm) x 6" (152mm), YODER, PULL-THRU, UNC/REC, SCRAP WINDER (13501) [13501]
  48" (1219mm) x 7.5" (190mm) BRANER/LOOPCO SLITTING LINE, 30,000# COILS, (12694) [12694]
  48" (1219mm) FORTE, 20,000# UNCOILER, 30,000# RECOILER, .1"- 0.020"THICK (13446) [13446]
  52" (1320mm) x 12" (304mm) HERR VOSS SLITTER, 40,000# COILS, 0.375" - 0.095" [12749]
  60" (1524mm) DELTA SLITTER, TWO HEADS 6" & 8" ARBOR, 40,000# COIL, 1/4" (12554) [12554]
  63" (1600mm), CAMERON TYPE 648 PAPER/FOIL SLITTING LINE (10220) [10220]

0S7748   STRAIGHTENERS, FLAT & SHAPE
  2 3/8" (20mm) - 3/4" (60mm) ARBOGA VERKSTAD, BAR SHAPE STRAIGHTENER (13289) [13289]
  4" (100mm) x 1" (25mm), MEDART, No. TPVC12-2, SHAPE STRAIGHTENER (13280) [13280]

0S8005   STRAIGHTENERS, TUBE & BAR
  3/8" (9.5mm) TORRINGTON No. 1819, 12 ROLL 2-PLANE TUBE/ROD STRAIGHTENER (12302) [12302]
  1/2" (12mm) MACKINTOSH HEMPHILL MODEL AY-HD 6 ROLL STRAIGHTENER (11982) [11982]
  5/8" (15.87mm) BRONX, MODEL BR00, 2 ROLL BAR STRAIGHENER (13240) [13240]
  5/8" (15.8mm) BRONX No. BROO 2R2M, 2 ROLL ROTARY STRAIGHTENER (13400) [13400]
  1/2" (12.7mm) - 3/4" (19mm) FENN, SINGLE PLANE ROD FEEDER/STRAIGHTENER (12886) [12886]
  1/4" (6.3mm) - 3/4" (19mm), KANE & ROACH, 2 ROLL STRAIGHTENER (13399) [13399]
  1" (25mm) MEDART MODEL OA BAR STRAIGHTENER (12312) [12312]
  1 1/8" (28mm) - 1/4" (6mm) SHUSTER 3GRS, 12 ROLL TWO PLANE STRAIGHTENER (13209) [13209]
  1 3/8" (35mm) SQ. BIGWOOD MODEL RS 2, SINGLE PLANE, SECTION STRAIGHTENER (12462) [12462]
  1 3/8" (35mm) - 1/4" (6.35mm), LOMA, TWO PLANE STRAIGHTENER (13483) [13483]
  1 3/8" (35mm) - 1/4" (6.35mm), LOMA, TWO PLANE STRAIGHTENER (13484) [13484]
  1 5/8" (41mm) FASTENER ENG. SB-1625, 5 ROLL, WIRE/ROD PRE-STRAIGHTENER (13295) [13295]
  2" (50mm), BLAW KNOX, MODEL MC, 6 ROLL ROTARY TUBE & BAR STRAIGHTENER (13107) [13107]
  2-1/4" (57mm) - 3/8" (9.5mm) BRONX MODEL BR 4, 2 ROLL ROTARY ROD STR. (12556) [12556]
  2 1/4" (57mm) WYCKO MODEL WS-4PS, 6 ROLL ROTARY WITH POWERED ENTRY (13421) [13421]
  2 1/2" (63mm), BRONX, HDT 2, 7 ROLL ROTARY TUBE STRAIGHENER (12692) [12692]
  2 1/2" (63mm) - 3/8" (9.5mm), SUTTON, No. 610, 6 ROLL ROTARY TUBE (13106) [13106]
  3" (76mm) - 3/4" (19mm), BIGWOOD, 1B, 7-ROLL TUBE & BAR STRAIGHTENER (11214) [11214]
  3" (80mm) - 3/4" (20mm), ZDAS, ROTARY BAR STRAIGHTENER, RECONDITIONED (13431) [13431]
  3 1/4" (82mm) - 3/4" (19mm), MEDART, 10 ROLL TWO PLANE BAR STRAIGHTENER (13281) [13281]
  4 5/8" (117mm), SUTTON, No. 2-25, 5 ROLL ROTARY STRAIGHTENER (13271) [13271]
  4 3/4" (120mm), MANNESMANN, 7 ROLL TUBE/BAR STRAIGHTENER (13259) [13259]
  5" (127mm) SUTTON MODEL 2B TUBE STRAIGHTENER (10728) [10728]
  5" (127mm), SUTTON, No. 2BM, TUBE STRAIGHTENER, 60/180 FPM, MANUAL ADJ. (13436) [13436]
  6" (152mm), SUTTON, 2B, 5 ROLL, TUBE 6", BAR 4" (101mm) TO 3/4" (19mm) (13272) [13272]
  6" (152mm), SUTTON, No. 2BC, 5-ROLL TUBE STRAIGHTENER, 4" (101") BARS (13268) [13268]
  6 1/2" (165mm), KIESERLING, 7 ROLL, TUBE STRAIGHTENER, 75 HP (13279) [13279]
  6 1/2" (170mm) TUBE STRAIGHTENER (11807) [11807]
  7 1/2" (190mm) - 2" (50mm), MEECO, No. 6, TWO ROLL BAR & TUBE ROTARY STR (13145) [13145]
  8" (203mm) Max., 8 ROLL ROTARY PIPE STRAIGHTENER, 2" (50mm) Min. Est., (13359) [13359]
  10" (250mm), MANNESMANN, 7 ROLL TUBE/BAR STRAIGHTENER (13260) [13260]

0S8305   STRETCHERS/STRAIGHTENERS_See also Specific Categor
  35 TON x 50 FT. (50m), FARREL, HYDRAULIC EXTRUSION STRETCHER (13326) [13326]
  200 TON, RD WOOD, STRETCH STRAIGHTENER & DETWISTER (13090) [13090]
  CUSTOM HYDRAULIC STRAIGHTENER (13093) [13093]

0S8650   SWAGERS
  5/16" (8mm) TORRINGTON MODEL 111F, 2 DIE ROTARY, 1/8" (3mm) SOLIDS (12836) [12836]
  1/2" (12mm) TORRINGTON 211 ROTARY, TABLE TOP MODEL, 3/16" (4.7mm) SOLID (13018) [13018]
  1/2" (12mm), TORRINGTON 211-SS, STATIONARY DIE, 3/16" (4.7mm) SOLIDS (11607 [11607]
  3/4" (19mm) TORRINGTON No. 3, 2 DIE ROTARY, 3/8" (9.2mm) SOLID (13311) [13311]
  7/8" (22mm) TORRINGTON 312, 2 DIE ROTARY, 3/8" (9.2mm) SOLID (11586) [11586]
  7/8" (22mm) TORRINGTON 312, 2 DIE ROTARY, 3/8" (9.2mm) SOLID, W/C HEAD (12198) [12198]
  7/8" (22mm) TORRINGTON 312, 2 DIE ROTARY, 3/8" (9.2mm) SOLID, W/C HEAD (12201) [12201]
  7/8" (22mm) TORRINGTON 312, 2 DIE ROTARY, 3/8" (9.2mm) SOLID, W/C HEAD (12202) [12202]
  7/8" (22mm) TORRINGTON 312, 2 DIE ROTARY, 3/8" (9.2mm) SOLID, W/C HEAD (12204) [12204]
  7/8" (22mm) TORRINGTON 312, 2 DIE ROTARY, 3/8" (9.2mm) SOLID, W/C HEAD (12205) [12205]
  7/8" (22mm) TORRINGTON 312, 2 DIE ROTARY, 3/8" (9.2mm) SOLID, W/C HEAD (12206) [12206]
  7/8" (22mm) TORRINGTON 312, 2 DIE ROTARY, 3/8" (9.2mm) SOLID, W/C HEAD (12208) [12208]
  7/8" (22mm) TORRINGTON 312, 2 DIE ROTARY, 3/8" (9.5mm) SOLID (12290) [12290]
  1" (25mm) TORRINGTON 3 1/2, 2 DIE ROTARY, 1/2" (12.7mm) SOLID, W/C HEAD (12195) [12195]
  1" (25mm) TORRINGTON MODEL 3 1/2, 2 DIE ROTARY, 1/2" (12.7mm) SOLID (12473) [12473]
  1 1/16" (27mm) MITCHELL, HYDRA-PUSH 2-DIE HYD. COILED ROD PUSH POINTER (13114) [13114]
  1 1/4" (31.75mm) Max., MITCHELL, 2-DIE, HYDRAULIC TUBE PUSH POINTER (12154) [12154]
  1 1/4" (31.75mm) Max., MITCHELL, SINGLE DIE, HYDRAULIC TUBE PUSH POINTER [12155] [12155]
  1 1/4" (31.75mm), STEVENS & BULLIVAN ROTARY, 2 1/2" (65mm) TUBE CAP (12605) [12605]
  1 1/2" (38mm) ABBEY ETNA MODEL 1515, LONG DIE ROTARY, 3/4" (19mm) SOLID (6239) [6239]
  1 1/2" (38mm) ABBEY ETNA MODEL 1515, 2 DIE ROTARY, WITH FEED (6515) [6515]
  1 1/2" (38mm) ABBEY ETNA MODEL 1515RA, LONG DIE, 15" (381mm) LONG (11443) [11443]
  1 1/2" (38mm) ABBEY ETNA No. 158, ROTARY, 3/4" (19mm) SOLID (13213) [13213]
  1 1/2" (38mm) TORRINGTON MODEL 323, 2 DIE, 1/2" (12.7mm) SOLID (6548) [6548]
  1 1/2" (38mm) TORRINGTON MODEL 323, 2 DIE, 1/2" (12mm) SOLID (5450) [5450]
  1 1/2" (38mm) TORRINGTON MODEL 4318, 18" LONG 2 DIE, ROTARY (10583) [10583]
  1 1/2" (38mm) AIR OPERATED FEED, DOUBLE JAWS, RAMP LOADING & INDEXING (11248) [11248]
  1 3/4" (44mm) FENN, MODEL 3 1/2F, LONG DIE ROTARY SWAGER, 5HP/3PH/60HZ (11697) [11697]
  1 3/4" (44mm) FENN MODEL 3 1/2F-10" (254mm), 2 DIE ROTARY (11710) [11710]
  1 3/4" (44mm) FENN MODEL 3F-2, 2 DIE ROTARY, 5/8" (16mm) SOLID (13117) [13117]
  1 3/4" (44mm) FENN MODEL 3F-2, 2 DIE ROTARY, 5/8" (16mm) SOLID (13148) [13148]
  1 3/4" (44mm) FENN MODEL 3F-2, 2 DIE ROTARY, 5/8" (16mm) SOLID (13367) [13367]
  1 3/4" (44mm) STANDARD/FENN MODEL 3A-2, 2 DIE ROTARY, 3/8" (9.5mm) SOLID (12841) [12841]
  2" (51mm), FENN MODEL 4-1/2F LONG DIE, 2 DIE SWAGER, 10HP, 5500# (13503) [13503]
  2" (50mm) FENN MODEL 4 1/2F-15" (381mm), 2 DIE ROTARY (11818) [11818]
  2" (50mm) FENN 2H HYDROFORMER, w/HYD POWER UNIT, 15/16" (24mm) SOLID (13008) [13008]
  2" (50mm) FENN MODEL 4 1/2F-15" (381mm) LONG 2 DIE ROTARY (10600) [10600]
  2" (50mm) FENN MODEL 4 1/2F-15" (381mm), 2 DIE ROTARY (11819) [11819]
  2" (50mm) MITCHELL, 12,500 LB. (5670 Kg), 2 DIE HYDRAULIC PUSH POINTER (11228) [11228]
  2" (50mm) TORRINGTON MODEL 4315, 2 DIE ROTARY, 15" (381mm) LONG (11216) [11216]
  2 1/8" (54mm) STANDARD/FENN MODEL 4A-2, 2 DIE ROTARY, 5/8" (16mm) SOLIDS (6805) [6805]
  2 1/4" (57mm), FENN, No. 4F, 2 DIE ROTARY, 15/16" (24mm) SOLID, 10 HP (13485) [13485]
  2 1/4" (57mm) FENN 4FSA STATIONARY DIE, ALTERNATING BLOW, SOLID 15/16" (11977) [11977]
  2 1/4" (57mm) FENN MODEL 4FSA, STATIONARY DIE, 15/16" (24mm) SOLID (10821) [10821]
  2 1/4" (57mm) FENN 4FSA STATIONARY DIE, ALTERNATING BLOW, 15/16" SOLID (11693) [11693]
  2 1/4" (57mm) TORRINGTON MODEL 433, 2 DIE ROTARY, 5/8" (16mm) SOLID (13247) [13247]
  3 3/8" (85.7mm) FENN No. 5 1/2F, LONG DIE, 24" (609mm) LONGEST TAPER (12833) [12833]
  3 1/2" (89mm) TORRINGTON No. 1047 2-DIE SWAGER, SOLIDS 1 1/4" (32mm) (13252) [13252]
  4 1/2" (114mm) FENN MODEL 6F, 2-DIE ROTARY, 25 HP/AC (13445) [13445]
  4 1/2" (114mm) STEVENS & BULLIVANT MODEL 15CS, 2" (50mm) SOLID (11717) [11717]
  6" (152mm) ABBEY ETNA MODEL 618A, 4 DIE ROTARY, 3" (76mm) SOLID (12827) [12827]
  6" (152mm) FENN 8FS SIMULTANEOUS BLOW STATIONARY DIE, 3 3/8" (85mm) SOLID (4928) [4928]
  TORRINGTON RACK AND PINION FEED, ORIGINALLY MTD ON A MODEL 1047 SWAGER (13478) [13478]
  SWAGER FEED, AIR OVER OIL TYPE, ORIGINALLY MOUNTED ON A TORRINGTON 3 1/2 (12526) [12526]

0T2154   TESTERS, HARDNESS
  WILSON, MODEL LL, HARDNESS TESTER w/OPTICS (11199) [11199]

0T2520   THREAD ROLLERS
  HARTFORD, MODEL 312, 6 THROUGH 5/16" (8mm) DIA. THREAD ROLLER (12838) [12838]

0T4535   TRANSFER MACHINES, ROTARY, TRUNION (HOR.& VERT.)
  NAMCO, MODEL RV6, CNC ROTARY TRANSFER MACHINE (11495) [11495]

0T5301   TRANSFORMERS, 3 PHASE, 60 CYCLE, DRY TYPE
  75 KVA, Pri 480 Sec 240 VOLTS, HEVI-DUTY, GENERAL PURPOSE TRANSFORMER (12893) [12893]
  220 KVA, Pri 460 Sec 460Y/266 Volts, REX TRANSFORMER, 1500 lbs. (12892) [12892]

0T6427   TUBE COILERS
  5/8" (16mm) - 1/4" (6.35mm) VAUGHN, TUBE LEVEL WIND LINE (11101) [11101]

0T6525   TUBE END FINISHING & CHAMFERING MACHINE
  4 1/2"(114.3mm) Cap, SMS MEER, No. RFA 14, TUBE CHAMFERING MACHINE (13278) [13278]

0T6554   TUBE END FORMING MACHINERY
  3/4" (19mm) - 1/8" (3mm), TORRINGTON, No. 60, DOUBLE STROKE (12776) [12776]
  1-1/2" (38mm), VAILL, No. 6A, DOUBLE STROKE (11655) [11655]
  2" (50mm), MITCHELL, No. PP512, TWO STATION RESERVOIR (10397) [10397]
  2 7/8" (73mm), MITCHELL, No. 536, HYDRAULIC VARIABLE WALL (11395) [11395]
  3" (76mm), FENN, No. 30-3, HYDRAULIC SINGLE STROKE (4869) [4869]

0T6730   TUBE FINNING MACHINERY
  CONFEX (CONFORM) FIN TUBE PRODUCTION LINE (12385) [12385]
  0.20" (5mm) - 0.5" (12.7mm) INNER GROOVE BLOCK, INVERTED VERTICAL, (13346) [13346]

0T6780   TUBE INSPECTION EQUIPMENT
  GENERAL ELECTRIC, ULTRASONIC TESTER, MAX. TUBE O.D. 2" (50mm) (13494) [13494]

0T6850   TUBE COILERS
  1/4" (6mm) - 1 1/8" (28mm), SCHUMAG PANCAKE COILER, 60-100 Ft., 22 KW (13395) [13395]
  3/16" (4.75mm) - 1/2" (12.7mm), TUBE LEVEL WOUND COILER, COPPER OR ALUM (13345) [13345]

0T6855   TUBE MACHINERY (Cut Off)
  1 1/2" (38mm), PINES, No. 15 DYNA CUT, CUTOFF WITH TARGET TABLE (11582) [11582]
  1 3/4" (44mm) - 1/8" (3mm), BERTOLETTE, No. 315, TUBE CUTOFF LINE (6152) [6152]
  7" (177mm), MODERN, No. 6K, 1977, Tube Cutoff, 3/4"-7" OD x 1-1/2" Wall (12607) [12607]

0T7071   TUBE MACHINERY (Draw Blocks)
  8" (203mm) CAPILLARY DRAW BLOCK, 10 HP HYD DRIVE, .160"-.040" (4mm-1mm) (1832) [1832]
  24" (610mm) MARSHALL RICHARDS, Pull 2000# INVERTED, 2000FPM, 7/16" INPUT (8063) [8063]
  54" (1370mm), MARSHALL RICHARDS, H54T, Pull 22,046 Lb., 113 kW, HORIZ (12588) [12588]
  54" (1370mm), MARSHALL RICHARDS, No. H54T, 113 kW, HORIZONTAL BLOCK (12590) [12590]
  60" (1525mm) DEMAG SMS VERTICAL TUBE SPINNER BLOCK, 300 HP (10717) [10717]
  60" (1524mm), VAUGHN, No. 60-22-76 VERTICAL DROPOFF, 86" (2184mm) FACE (12286) [12286]
  84" (2133mm) FENN HORIZONTAL BLOCK, 500 FPM, COIL WEIGHT 500 LB., 400HP (11567) [11567]
  84" (2130mm), IHI, Pull 10,582 Lb., SPINNER BLOCK FOR COPPER TUBE, (13343) [13343]
  84" (2133mm), MANNESMANN DEMAG, No. 80TVC 2000, SPINNER BLOCK (10345) [10345]
  84" (2130mm), MORGAN, Pull 7,500 Lb., SPINNER BLOCK FOR COPPER TUBE, (13344) [13344]
  84" (2133mm) VAUGHN No. 84-24-26 SPINNER BLOCK, Pull 26502 Lb. (11566) [11566]

0T7301   TUBE MACHINERY (Miscellaneous)
  SMIPACK, TUBE SHRINK WRAPPING MACHINE, 1/4" (6mm) - 7/8" (22mm) COIL (12604) [12604]
LOT TUBING RACKS AND CRADLES (13330) [13330]

0T8253   TUBE MILLS
  2 1/2" (63.5mm) x .095" (2.41mm), YODER, M2, ERW TUBE MILL, R-L, 150 FPM (13109) [13109]
  3" (76mm) x .135" (3.5mm), URRUTIA, 2-1/2, TUBE MILL (NO WELDER/SHEAR) (11829) [11829]

0T9148   TURNSTILES
  24,000 Lb. (10.8 MT), PAXSON, TWO ARM POWER TURNSTILE, (11476) [11476]

0U4003   UNCOILERS
  2,000 Lb. (907 Kg) BERTOLETTE MODEL 2CP, DOUBLE END, AIR BRAKE (8171) [8171]
  2,500 Lb. (1134 Kg), COOPER WEYMOUTH, DOUBLE ARM UNCOILER (11387) [11387]
  2,500 Lb. (1134 KG), LITTELL, MODEL 25, NON-DRIVEN COIL PAYOFF (12950) [12950]
  4,000 Lb. (1814 KG) x 10" (254mm) ADS DUAL ARM, DUAL ARM-SWIVEL PAYOFF (6585) [6585]
  4,000 Lb. (1814 Kg), LITTELL, MODEL 40-24, 14"/18" I.D. x 24" WIDE (10799) [10799]
  5,000 Lb. (2268 Kg) x 12" (305mm), EGAN, MODEL 1482, SINGLE MANDREL (12278) [12278]
  6,000 Lb. (2721 Kg) x 24" (609mm), LITTELL, No. 6000, HYD EXPANSION (13492) [13492]
  10,000 Lb. (4535 KG) x 12" (305mm), SMF, UNCLR, 25 HP DC, SINGLE MANDREL (12277) [12277]
  15,000 Lb. (6800 KG) x 48" (1220mm) MECON, D15OM48, MOTORIZED DUAL REEL (13173) [13173]
  20,000 Lb. (9071 Kg) x 40" (1016mm), B & K, UNCOILER (12625) [12625]
  20,000 Lb. (9072 Kg) x 48" (1220mm), LEWIS, UNCOILER, HYD EXP, [11751] [11751]
  20,000 LB (9072 KG) x 40" (1016mm), PAXSON, 14/16" ID, 5HP, SLIDING BASE (10608) [10608]
  36,000 Lb. (16,329 Kg) x 48" (1220mm), LITTELL, POWER UNCOILER [12571] [12571]

0U5004   UPCOILERS
  3" (76mm) x 14" (355mm) RUESCH No. 141, 3 ROLL, 24" (609mm) COIL O.D. (8000) [8000]
  4" (101mm) x 28" (711mm), TORRINGTON, CARRIER ROLLS 2 1/2" (63mm) x 28" (113) [113]
  20" (508mm) x 2 5/8" (67mm) ARM, CARRIER ROLLS 2 5/8", BENDING ROLLS 4" (12792) [12792]

0U5503   UPENDERS/DOWN-ENDERS
  8,000 Lb (3628 kg) ECONO SH 80 SK702, COIL 54"(1371mm)W 72"(1829mm)OD (13381) [13381]
  10,000 Lb.(4535 KG) BUSHMAN No. M9604 MECHANICAL UPENDER, 1-1/2 HP MOTOR (13136) [13136]
  20,000 Lb. (9072 Kg) x 52" (1320mm), SES, UPENDER (13234) [13234]
  20,000 Lb. (9072 Kg), No. 20000, ROTATING COIL UPENDER, 5 HP, DUAL CHAIN [13339]
  30,000 Lb. (13,600 Kg) x 48" (1220mm), BRADBURY, UPENDER/COIL CAR (13235) [13235]
  40,000 Lb. (18,144 KG), MATHEWS, HYDRAULIC, COIL UPENDER/DOWNENDER (11701) [11701]

0V2753   VIBRATORS, VIBRATORY FINISHERS
  FINISH MASTER FM-6000 VIBRATORY DEBURRING/POLISHING (13458) [13458]

0W0504   WASHING EQUIPMENT
  LEWIS, AUTOMATED ULTRASONIC PARTS WASHING LINE, FOR METALWORKING PARTS (13199) [13199]

0W1403   WELDERS, BUTT
  MICR0, J5S, 0.060" - 0.250" (1.2mm-6.3mm) STEEL, BUTT WELDER (13423) [13423]

0W3254   WELDERS, STRIP
  10" (254mm) x 0.125" (3.175mm) IRON BAY MODEL MP-22 COIL END JOINER (12639) [12639]

0W5002   WIRE MACHINERY, BULLBLOCKS
  10" (254mm) WIRE DRAWING BULL BLOCK (13426) [13426]
  12" (305mm) MOSSBERG & GRANVILLE, SINGLE DIE, 5 HP AC (7032) [7032]
  12" (304mm) VAUGHN MODEL 8SD VERTICAL BULLBLOCK, 10/13 HP (10536) [10536]
  15" (381mm) WIRE DRAWING BULL BLOCK (13230) [13230]
  20" (508mm) DTM-03-20 FASTENER ENGINEERING IN LINE WIRE DRAWER (13370) [13370]
  20" (508mm) FASTENER ENGINEERING No. DA-03-2020, VARIDRIVE, BLOCK DIA 20" (4989) [4989]
  20" (508mm) FASTENER ENGINEERING No. DTV-02-20S BULL BLOCK (11930) [11930]
  20" (508mm) FASTENER ENGINEERING No. DTV-02-20, BULL BLOCK (11931) [11931]
  20" (508mm) FASTENER ENGINEERING No. DTM-03-20 BULL BLOCK (11934) [11934]
  20" (508mm) MACBEE No. SWBB20-3 BULL BLOCK (11935) [11935]
  20" (508mm) MACBEE No. SWDBB20-3 BULL BLOCK (11938) [11938]
  20" (508mm) MACBEE No. SWDBB-20-2 BULL BLOCK (NEEDS CAPSTAN) (11941) [11941]
  20" (508mm) RMG No. 34-05132-75 IN-LINE, CAP. 0.250"-0.187" (6.3-4.7mm) (10006) [10006]
  22" (559mm) SHOWA SINGLE DIE BULL BLOCK 10 HP VFD DRIVE (13298) [13298]
  22" (559mm) VAUGHN DOUBLE DECK BULL BLOCK 30 HP VFD DRIVE (13299) [13299]
  24" (610mm), VAUGHN, DUAL BLOCK SYSTEM FOR WIRE SHAVING, 50/60HP, 230V (13276) [13276]
  28" (711mm), DTI, IN LINE WIRE DRAWER 0.375" - 0.437" (9.5-11mm) (13380) [13380]
  36" (914mm) FASTENER ENG., PJC-275-475-36, 9/16" MAX, 31 FPM (13407) [13407]
  36" (914mm) MORGAN MODEL 16,DOUBLE DECK BULL BLOCK, 200 HP DC (13292) [13292]
  36" (915mm) VAUGHN No. 22SD WIRE DRAW BULLBLOCK, 125/150 HP (12108) [12108]
  36" (915mm), MACBEE, DOUBLE BLOCK WIRE DRAWING LINE W/PAYOFF & TAKE-UP (13207) [13207]
  42" (1067mm), VAUGHN, 150 HP, .300"- 1" CARBON STEEL, PUSH-UP BLOCK (13307) [13307]
  44" (1117mm), FASTENER ENGINER, PJC-2520-584-44, 1" CAPACITY, 2-32 FPM (13172) [13172]
  46" (1168mm), MORGAN, No. 105, BULL BLOCK, HORIZONTAL, 15" (381mm) W., (13296) [13296]
  48" (1219mm), VAUGHN, 200 HP, 0.70"-1.625" CARBON STEEL, PUSH-UP BLOCK (13305) [13305]

0W5240   WIRE MACHINERY, CONTINUOUS POINTERS (PRE-DRAW)
  MORGAN MODEL 250, 2 ROLL CONTINUOUS POINTER (10604) [10604]
  1/4" (6.3mm) MORGAN MODEL 250, CONTINUOUS ROLL POINTER (10696) [10696]
  1/2" (12mm) MORGAN MODEL 500, 9 GROOVES, 3HP/550V, 1/16" (1.5mm) MIN. (11159) [11159]
  1/2" (12mm) MORGAN MODEL 500, 9 GROOVES, 3HP/575V, 1/16" (1.5mm) MIN. (11160) [11160]
  1/2" (12mm) MORGAN MODEL 500, 9 GROOVES, 3HP/575V, 1/16" (1.5mm) MIN. (11176) [11176]
  3/8" (9.5mm) VAUGHN No. 1 CONTINUOUS ROLL POINTER (10695) [10695]
  1/2" (12mm), WATERBURY FARREL CONTINUOUS WIRE POINTER, 575 VOLT MOTOR (11149) [11149]

0W5548   WIRE MACHINERY, DRAWERS
  No. 1F WM 825 MACBEE 8 DIE WET TYPE WIRE DRAWER (12997) [12997]
  No. 5HR VAUGHN MOTOBLOX, .220", 15 HP DC/BLK, 16" INT-MED BLKS 22 FINISH (5366) [5366]
  No. 6HIV VAUGHN 6 DIE/6 BLOCK, .220"- .030" (5.5mm-0.7mm), 10 HP, 230V DC (6848) [6848]
  No. 6HIV VAUGHN 6 DIE/6 BLOCK, .218"- .030" (5.5mm-0.7mm), 10 HP, 230V DC (6850) [6850]
  No. BB-14 FENN 6 BLOCK, 0.187"-0.25" (4.7-6.3mm), 14" DIA. BLOCKS (11186) [11186]
  No. DTVA-0715-36 FASTENER ENGINEERING, 5/8" (15.9mm), JUST RECONDITIONED (13500) [13500]
  No. M5.4.5A.F31 NIEHOFF, .023"- .002" (.6mm-.18mm) (13233) [13233]
  No. T10S BE TVN TECH, 10 PASS, WET WIRE DRAWING MACHINE (13245) [13425]
  No. TF111B, HERBORN, .040" (1.016mm), HIGH CARBON FINE WIRE DRAWER (11859) [11859]
  No. TF111C/13, HERBORN, 0.040" (1.016mm) HIGH CARBON 13 DIE WIRE DRAWER (11857) [11857]
  No. TF111C/13, HERBORN, 0.040" (1.016mm) HIGH CARBON 13 DIE WIRE DRAWER (11858) [11858]
  TYPE C, MORGAN-CONNOR, 5 BLOCK, 0.135" (3.429mm) HIGH CARBON, 25 HP (10184) [10184]

0W5604   WIRE MACHINERY, DRAWERS, STRAIGHTENERS & CUTTERS
  No. 0 SCHUMAG COMBINED DRAWING, DRAW SPEED 30m/min, 2-7.5mm DIA. SOLID (12460) [12460]
  No. KZ-P-1S, SCHUMAG, FOR TUBES 0.2"-1.1" (6mm-28mm), 55 KW (12595) [12595]
  No. KZ-P-IS, SCHUMAG, FOR TUBES 0.15"-0.98" (4mm-25mm), 55 kW (12593) [12593]
  No. KZ-R-IS, SCHUMAG, FOR TUBES 0.15"-0.86" (4mm-22mm), 37 kW (12592) [12592]
  No. KZ-R-P1, SCHUMAG, FOR TUBES 0.2"-1.1" (6mm-28mm), 55 kW (12594) [12594]
  STRAIGHTENING/POLISHING UNIT FOR SCHUMAG No. KZRP-I COMBINED DRAWING M/C (5353) [5353]
  No. P-IB/5, SCHUMAG, FOR TUBES 0.2"-101" (6mm-28mm), 55 kW (12596) [12596]
  SCHUMAG 1-1/8" (28.57mm) TUBE FINISH LINE CUT-TO-LENGTH AND COIL (11497) [11497]
  SCHUMAG 2 1/4"- 1 1/4" (58mm-32mm) CASCADE TUBE DRAWING LINE (13351) [13351]
  SCHUMAG, 2" (50mm), RAN ONE YEAR, w/VERT/HORIZ PRE-STRAIGHTENER (13465) [13465]
  ZDAS 10mm-32mm (0.40"- 1.25") STEEL BAR COMBINED DRAWING, HEAVY DUTY (12901) [12901]

0W5854   WIRE MACHINERY, FLATTENING MILLS
  0.216" (5.5mm) - 0.708" (18mm) MINO 3 STAND TANDEM WIRE FLATTENING MILL (11806) [11806]
  2 3/4" (70mm) x 2" (51mm), 2-HI ROLLING MILL, 3 HP AC GEARMOTOR (7403) [7403]
  4" (101mm) x 1" (25mm) ACCURATE WIRE, WIRE FLATTENING w/TRAVERSE SPOOLER (11852) [11852]
  13/16" (20.7mm) x 4" (101mm) x 2" (50mm) BHS-TORIN 2/4 HI, HYD SCREWDOWN (11722) [11722]
  6" (152mm) x 1 1/2" (38mm) STANAT, 2-HI WIRE FLATTENING, 15 HP DC (12317) [12317]
  6" (152mm) x 1 1/2" (38mm) STANAT, 2 HI WIRE FLATTENING, 15 HP DC (12319) [12319]
  6" (152mm) x 2 1/2" (63mm) STANAT, 2/4-HI WIRE FLATTENING, 40 HP (12314) [12314]
  6" (150mm) x 3" (75mm) KUHARA 2 STAND, SPEED 100m/min., 200V/50HZ/60kW (13468) [13468]
  6"(152mm) x 3 1/2"(89mm) TISHKEN STR-30-002-HWA WIRE FLATTENING & CUTOFF (10429) [10429]
  6" (152mm) x 3 1/2" (89mm) TISHKEN STR30-C0-2HW WIRE FLATTENING & CUTOFF (10421) [10421]
  6" (152mm) x 4" (101mm) STANAT MODEL TTA-400, 2-HI WIRE FLATTENING MILL (12318) [12318]
  6" (152mm) x 4" (101mm) STANAT, W/DUAL TAKE-UP, PAYOFF, VARI-SPEED, STR. (7144) [7144]
  6" (152mm) x 4" (101mm) TISHKEN ST2-C02, 2 STAND TANDEM SHAPING & CUTOFF (7334) [7334]
  8" (203mm) x 2" (50mm) FENN 2-HI FLATTENING, 30 HP, CARBIDE SHELL ROLLS (12010) [12010]
  8" (203mm) x 6" (152mm), FENN, No. 082, 2-HI COLD ROLLING MILL (8183) [8183]
  8" (203mm) x 6" (152mm) FENN, 2 STAND TANDEM 8, 6, w/TRAVERSE WINDER (12515) [12515]
  8" (203mm) x 6" (152mm) FENN, 3 STAND TANDEM 8, 6, 6, TRAVERSE TAKE UP (12514) [12514]
  10" (254mm) x 2" (50mm) FENN 2 HI, 75 HP DC, CARBIDE SHELL ROLLS (12009) [12009]
  11" (279mm) x 4 1/2" (114mm) TISHKEN STR-FLS-2, FLATTEN, STR & CUT-OFF (12450) [12450]

0W6153   WIRE MACHINERY, PAYOFFS
  FASTENER ENGINEERING, MODEL PF-2500-08 COIL OPENER/PAYOFF (10990) [10990]
  WATERBURY FARREL, MODEL AV-40, POWER DRIVEN, UNCOILER (11286) [11286]

0W6356   WIRE MACHINERY, SPOOLERS
  HUESTIS, WIRE RESPOOLING LINE (12811) [12811]
  500 LB. (227KG) RUESCH MODEL 271 TRAVERSING TAKE-UP REEL, 4 1/2" TRAVERSE (8001) [8001]
  1000 LB. (453KG) STANAT TRAVERSING TAKE-UP REEL (12334) [12334]
  500 LB. (226KG) TRAVERSING TAKE-UP REEL, BALL SCREW TYPE TRAVERSE (12424) [12424]

0W6753   WIRE MACHINERY, STRAIGHTENERS
  1/4" (6.3mm) WELLS No. 5N STRAIGHTENER, CAPACITY .25" - .097" (6mm-2.4mm) (5689) [5689]
  5/16" (8mm) SHUSTER No. 26SFT, DUAL ARBOR, CAP. 0.093"- 0.312" (2-8mm) (13300) [13300]
  5/16" (8mm) SHUSTER-METTLER No. 26SFT, CAP. .093" - .312" (2.3mm-8mm) (13192) [13192]
  1 1/4" (31.7mm) VAUGHN 3 ROLL ROD STRAIGHTENER, 1 1/4" MEDIUM CARBON (6215) [6215]

0W6804   WIRE MACHINERY, STRAIGHTENERS & CUT-OFFS
  .080" (2.0mm) - 0.012" (.304mm) LEWIS No. 0, ELECTRIC AIR (12256) [12256]
  1/8" (3.175mm) LEWIS No. 7-D, WIRE STRAIGHTEN & CUT-OFF LINE (13620) [12620]
  1/4" (6.35mm) SHUSTER No. 1AV5, WIRE STRAIGHTEN & CUT-OFF, 20-200 FPM (12622) [12622]
  1/4" (6.35mm) SHUSTER No. 1AVS-5, WIRE STRAIGHTEN & CUT-OFF LINE (12621) [12621]
  5/8" (15.8mm) - 3/8" (9.5mm) LEWIS No. 10-F, STRAIGHTEN & CUT, 40 HP (13135) [13135]
  5/8" (15.8mm) - 3/16" (4.7mm) LEWIS No. 10-F, WIRE STRAIGHTEN & CUT (13141) [13141]
  5/8" (16mm) SHUSTER No. 4AV, 12' (3.6m) CUT LENGTH, STATIONARY CUT-OFF (13174) [13174]
  3/4" (19mm) LEWIS No. 11FHA, TRAVEL CUT WIRE STRAIGHTEN & CUT MACHINE (13138) [13138]

0W7154   WIRE MACHINERY, TAKE-UPS
  12" (304mm) CONNECTICUT WIRE, TRAVERSE TAKE-UP FLAT & ROUND WIRE (10839) [10839]
  12" (304mm) CONNECTICUT WIRE, TRAVERSING SPOOL/WIRE TAKE-UP (10779) [10779]
  FENN, HYDRAULIC TRAVERSE TAKE-UP (11602) [11602]
  FENN HYDRAULIC TRAVERSE TAKE-UP (11604) [11604]
  14" (355mm) STEEL HEDDLE, TRAVERSE WINDER, 1,000 LBS. (453 KG) (12220) [12220]
  16" (406mm) DRIVE CAPSTAN, WHITACRE, 3 STATION DOWNCOILER WIRE TAKE-UP (13443) [13443]

0W7275   WIRE MACHINERY, TURKS HEAD
  FENN, No. 102PD, POWER DRIVEN TURKSHEAD (11676) [11676]
  BHS-TORIN, No. 165C, 5TH TYPE, COMBINATION TURKSHEAD (8006) [8006]
  FENN No. 2U UNIVERSAL TYPE TURKSHEAD (13495) [13495]
  FENN, No. 3P, PLAIN TYPE HIGH SPEED TURKSHEAD (12324) [12324]
  FENN, No. 3P, PLAIN TYPE HIGH SPEED TURKSHEAD (12418) [12418]
  FENN, No. 4P, PLAIN TYPE, STANDARD SPEED, FRICTION TURKSHEAD (11356) [11356]
  FENN, No. 5TH, COMBINATION TYPE, .437" (11mm) MAX SQUARE, TURKSHEAD (12017) [12017]
  FENN, No. 5U, UNIVERSAL TYPE TURKSHEAD, .437" (11mm) MAX. SQUARE (11672) [11672]
  FENN, No. 5U, UNIVERSAL TYPE TURKSHEAD, .437" (11mm) MAX. SQUARE (11674) [11674]
  FENN, No. 5U, UNIVERSAL TYPE TURKSHEAD, .437" (11mm) MAX. SQUARE (11673) [11673]
  STANAT WIRE SHAPING LINE WITH DANCER AND TRAVERSING TAKE UP (12310) [12310]
  28" (711mm), FENN STYLE TURKSHEAD CAPSTAN, 30 HP DC (5951) [5951]
  PLAIN STYLE TURKS HEAD (12146) [12146]
  24" (609mm) DOUBLE CAPSTAN, 2" (51mm) FACE WIDTH, 5 HP, CLUTCH DRIVE (11713) [11713]

0Z9001   EQUIPMENT WANTED
  MACHINES WANTED (13301) [13301]

Please complete the form below so we have accurate contact information to give your request the consideration it deserves. At the minimum, we need company name, your name, and your email address.

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Country:

How did you hear of us?

Please enter text from above:

 |  Machinery International Corporation  |  Contact Us  |  Email Sales Department  |  203.484.0400  | 

RETURN