Machinery International Corporation 20 Commerce Drive
North Branford, CT 06471 USA
Tel: +1 203-484-0400
Fax: +1 203-484-4499
sales@machyintl.com
Spanish Flag French Flag German Flag Chinese Flag

When the symbol appears you may click on it for a picture and/or detailed specifications. The number enclosed in [] is our stock number.

For a quote or more information on the items shown, check the box at the start of the line and fill in your contact information at the bottom of the screen.

0A1920   AIR COMPRESSORS
  GARDNER DENVER, No. RSD 1750A4, COMPRESSED AIR DRYER, 3 PH/60 Hz/460V (13144) [13144]
  WORTHINGTON CORP MODEL BN TWO STAGE COMPRESSOR W/TANK (10178) [10178]

0A2450   AIR COMPRESSORS, ROTARY SCREW/SLIDING VANE
125 PSI, TWISTAIRE, No. TA02584-2, 25 HP,,

0B0704   BALERS, SCRAP METAL
  Model 15000, INTERNATIONAL, SCRAP BRIQUETTER, (12926) [12926]

0B0800   BALL & PEBBLE MILLS
  PAUL O ABBE BALL MILL MODEL A16685 (12703) [12703]

0B1100   BANDING LINES
  SIGNODE, Slit Coil Banding Line (11273) [11273]

0B1150   BAR TURNERS/PEELERS
  7/8" (22mm), KIERSERLING, WDH 20, 6 - 22mm, BAR PEELER (13373) [13373]
  1 1/4" (31.75mm) - 3/8" (9.5mm), HETRAN, No. WS2, 1982, ROD SHAVER (13303) [13303]
  1 1/2", HETRAN, No. WS-15, 1993, 4000# COILS (11585) [11585]
  10" (254mm), CALOW, DMA 10, BAR PEELER, 60mm - 250mm DIAM. (13372) [13372]

0B1804   BENDERS, PIPE, TUBE & BAR
  1 1/2" (38mm) PINES #1 TUBE BENDER w/ALLEN BRADLEY PANELVIEW 550 CONTROL (13237) [13237]
  1 1/2", PINES, No. 5T, VERTICAL TUBE BENDER, PEDESTAL CONTROL, 20 HP (12022) [12022]
  2 1/4", PINES, No. 25T, VERTICAL TUBE BENDER, 25 HP, WITH CONTROLS (12023) [12023]

0C0875   CASTING MACHINES, BILLET
  3000 Lb/hr AJAX-WYATT DOUBLE RAM TILT INDUCTION FURNACE CASTING LINE (13085) [13085]

0C0926   CASTING MACHINES, CONTINUOUS
  12" (305 mm), ASARCO/ASCAST, 1981, CONTINUOUS COPPER BILLET CASTER (12764) [12764]
  EWEN CONTINUOUS CASTER 1/2"(12.7mm) ROD, 6.5"(165mm) x 1/2"(12mm) STRIP (13009) [13009]
  GENERAL ELECTRIC CONTINUOUS COPPER ROD DIP FORM CASTING LINE, 36,000 TPY (4006) [4006]
  HAZELETT CONCAST AND ROLL LINE FOR ZINC CALOTS AND ALUMINUM SLUGS (13188) [13188]
  HILL LOMA, CONTINUOUS 7"-15" (180-380mm) VERTICAL COPPER BILLET CASTER (10723) [10723]
  METATHERM HORIZONTAL CONTINUOUS CASTING LINE, 320mm WIDE X 20mm THICK (13112) [13112]
  NEW, 14"- 6"(355mm) OCN, 2004, 3 STRAND COPPER BILLET CASTER (10509) [10509]
  OUTOKUMPU, 1997, 8 X 8MM (5/16") CU ROD UPCASTER, 10,000 TONS PER YEAR (12426) [12426]
  RAUTOMEAD, No. RS2500/8, 8 RODS UPWARD CONTINUOUS CASTER, NEW 2007 (12425) [12425]
  RAUTOMEAD, No. RVS IIIV, VERTICAL CONTINUOUS CASTER, FOR GOLD/SILVER (13313) [13313]
  TECHNICA, CONTINUOUS NON-FERROUS 8"-10" (200-250mm) BILLET CASTER (10766) [10766]
  COPPER ROD CONCAST/ROLL LINE FOR 8mm (.314") ROD (13153) [13153]
  9" (228mm) 12 STRAND ALUMINUM BILLET CASTER (10260) [10260]
  COPPER BUS BAR MANUFACTURING LINE (13080) [13080]

0C1350   CHAMFERING MACHINES
  3 1/8" (79mm) Max. Cap., LNS, No. PB80, BAR CHAMFERING MACHINE, 2HP (13219) [13219]

0C3145   COIL END JOINERS
  72"(1828MMmm)x.375"(9.5mm) COIL END JOINING WELDER, HOBART 300 AMP WELDER(12264) [12264]

0C3708   COMPACTORS
  PACK-MASTER, No. 10001259, AIR POWERED COMPACTOR (12828) [12828]

0C3865   COMPLETE PLANTS
  AVAILABLE FOR IMMEDIATE PURCHASE ALUMINUM/BRASS ROD MILL OPERATION (11708) [11708]
  COPPER TUBE PRODUCTION PLANT (12888) [12888]
  HAZELETT CONCAST AND ROLL LINE FOR ZINC CALOTS AND ALUMINUM SLUGS (13190) [13190]
  COMPLETE BRASS & SANITARY FITTINGS PLANT FOR FAUCETS, FIXTURES, ETC. (10068) [10068]

0C6306   CRANES, BRIDGE & OVERHEAD
  7.5 TON x 60' SPAN SHEPHERD NILES TOP RUNNING DOUBLE GIRDER BRIDGE CRANE (13089) [13089]

0C8030   CUT-OFFS, PIPE, TUBE & BAR
  1 1/4" (31mm), FENN MFG, MODEL 125 IMPACT CUTOFF W/20'-0" LONG BAR FEED (13183) [13183]

0C8090   CUT-TO-LENGTH LINES
  48" x 1/4", AMERICAN STEEL LINE, 10,000# COIL (11051) [11051]
  50" (50mm) x 0.052" (1.32mm), B & K, 1975, CUT TO LENGTH LINE (10956) [10596]
  60" (1524mm) x .135" (4.75mm), ROWE, STACKER FOR CUT-TO-LENGTH LINE, (12041) [12041]
  1600mm X 3mm UNGERER, 1981, CUT-TO-LENGTH LINE (11406) [11406]

0D0654   DEBURRING MACHINES
  1/4" - 3/4" TUBE DEBURRING MACHINE, 18" - 12 FT LENGTH, AUTO-LOAD (2937) [2937]

0D3375   DRAW BENCHES
  2000 Lb., SINGLE CHAIN HYDRAULIC 16FT LONG DRAWBENCH, SINGLE DIE (13258) [13258]
  10,000 Lb. (4535 KG), WEAN, 1992, 5 DIE CHAIN DRIVEN TUBE DRAWBENCH (13318) [13318]
  24,000 Lb.(12 TON) 2 1/4"- 1 1/4" (58mm-32mm) SCHUMAG CASCADE TUBE DRWNG (13350) [13350]
  25,000 Lb. (12.5 Ton), AETNA STANDARD/MONTBARD, 3 DIE DRAWBENCH (12897) [12897]
  30,000 Lb. (15 TON) OTT 3 DIE FOR TUBE, 40' (12m) ENTRY, 50' (15m) L (13387) [13387]
  40000 Lb., BIGWOOD, SINGLE CHAIN, 9 METER LENGTH, 35 HP (12459) [12459]
  45,000 Lb. (20 MT), WEAN, 1992, 3 DIE HYDRAULIC TUBE DRAWBENCH (13319) [13319]
  50000 Lb., BROOKES, 13 METER LENGTH (12458) [12458]
  65,000 Lb. (30 Tons), MONTBARD, 1985, 3 DIE TUBE DRAWBENCH, 36m DRAW (12585) [12585]
  90,000 Lb. (40 MT), WEAN, 1992, 5 DIE HYDRAULIC TUBE DRAWBENCH (13320) [13320]
  100,000 Lb.(45,360 KG), AETNA STANDARD, 3 DIE DRAWBENCH TUBE 1.4" - 4.3" (13347) [13347]
  100,000 Lb. HEAD WRIGHTSON DRWBNCH FOR BAR, 32' (9.7m) SINGLE DRAW, (13365) [13365]
  150,000 Lb. (75 TON) OCN 1 DIE FOR TUBE, ENTRY 50' (15m) 60' (18m) L (13388) [13388]
  200,000 Lb. (90,718 Kg), AETNA STANDARD, 3 DIE DRAWBENCH TUBE (13348) [13348]

0D4554   DRILLS, GUN
  RAVENSBURG, 1982, AUTOMATIC BILLET GUN DRILL PRODUCTION LINE (10508) [10508]

0D7553   DRYERS
  CORECO SWARF DRYER (12464) [12464]
  REFRIGERATED AIR DRYER MODEL NCH500W-4 (12704) [12704]

0E1503   EDGING LINES
  COILPRO, 2001, EDGING/SKIVING LINE, .003"-0.050" THICKNESS (11202) [11202]
  3" WIDE, RUESCH MODEL 270 POWER DRIVEN EDGER (8002) [8002]
  6" x 4" TISHKEN 2 STAND MDL ST2-C02 WIRE SAHPING & CUT OFF LINE (12686) [12686]
  6" X 3 1/2" TISHKEN MDL STR-30-002-HWA, FLATTENING & CUT OFF (12688) [12688]
  11" x 4 1/2", TISHKEN, No. STR-FLS-2, WIRE FLATTEN, STR & CUT-OFF LINE (12685) [12685]
  6" X 3 1/2" TISHKEN MODEL STR30-C0-2HW WIRE FLATTENING AND CUT OFF (12687) [12687]
  18" - 4" (457mm-100mm) STRIP EDGING LINE (10825) [10825]

0F5006   FURNACES
  108"W. x 84"H. x 216"L., RAPID TECHNOLOGY, 2300 DEGREES F (11729) [11729]
  CORBETT IND, SIZE 37" D X 25" H X 52" W ELECTRIC (12816) [12816]
  PARAGON HEAT TREAT OVEN MODEL RG18-1 (12800) [12800]
  ROLOCK GAS OVEN WITH INTERNAL QUENCH TANK 1500F (12799) [12799]
  T-M VACUUM PRDTS, VACUUM SHELF DRYER (12819) [12819]

0F5218   FURNACES, ANNEALING, STRIP
  36" (914mm)H x 42" (1066mm)OD S&M ENGINEERING PIT TYPE BELL ELECTRIC (113623) [13338]

0F5276   FURNACES, BELL TYPE
  42" (1067mm)Dia x 36"(914mm)H., S&M, PIT BELL TYPE ELECTRIC ANNEALING (13368) [13368]
  48" (1200mm) Dia. x 98" (2500mm) H., EBNER, 1993, BELL ANNEAL FURNACE (12566) [12566]
  59" (1500mm) Dia x 98" (2500m) H, CEBA, BELL, 850 Deg C (1560 Deg F) (12678) [12678]

0F5304   FURNACES, BELT CONVEYOR
  12" W. x 8" H. x 144" L., C I HAYES, CONTINUOUS BELT FURNACE, MAX 2100F (12305) [12305]

0F5375   FURNACES, BOX TYPE
  24" (610mm) W. x 24" (610mm) H. x 48" (1220mm) L., HEVI-DUTY BOX FURNACE (12879) [12879]

0F8175   FURNACES, ROLLER HEARTH
  57"W., 16"H., 57"L., RIPOCHE, ROLLER HEARTH ANNEALING FURNACE, 3 ZONE (12597) [12597]

0F8650   FURNACES, STRAND ANNEALING
  CONTROL APPLICATION STRAND ANNEALER 6 STRAND (12801) [12801]

0F8704   FURNACES, STRIP ANNEALER
  5" (127mm), C I HAYES, STRIP ANNEALING FURNACE, STRIP WIDTH 1/2"- 5" (12-127mm) [13335]
  12" (305mm), THERMAL BASIC ANNEALING FURNACE, STRIP 1"- 12" (25-305mm), ELECTRIC [13336]
  13 1/2" (343mm), THERMAL BASICS ANNEALING FURNACE, STRIP WIDTH 1"- 13-1/4" [13337]

0F9004   FURNACES, VACUUM
  INDUCTOTHERM VACUUM INDUCTION MELTING SYSTEM VIP POWER TRAK 125-30 (12857) [12857]
  IONEX, 50 lbs MAX, VACUUM INDUCTION MELTER (12858) [12858]

0G7426   GRINDERS, ROLL
  36" (914mm) x 166" (4216mm), FARREL, REBUILD 2006, CNC, WHEELHEAD 40 HP (12851) [12851]
  36" x 168", CINCINNATI-MILACRON, No. OM TRAVELING-WHEELHEAD ROLL GRINDER (12852) [12852]
  36" (900mm) x 189" (4800mm), CHURCHILL, No. FB, CYLINDRICAL/ROLL GRINDER (12848) [12848]
  43" (1100mm) x 216" (5500mm), CHURCHILL, No. TWB, 1976, HEAVY DUTY ROLL GRINDER [12847]
  48" x 378", FARREL, DUAL WHEEL ROLL GRINDER (10145) [10145]
  49" (1250mm) x 236" (6000mm), WALDRICH SIEGEN, ROLL GRINDER (13020) [13020]
  70" (1778mm) x 425" (10m) NAXOS UNION No. W 1800/11500 ROLL GRINDER, 20-50 TON [12582]

0G7960   GRINDERS, SURFACE, N/C & CNC
  VANGROENWEGHE TURBOGRINDER TYPE T-300-2K BELT GRINDING MACHINE (13095) [13095]

0G8025   GRINDERS, SURFACE, RECIPROC. TABLE (HOR. SPDL.)
  6" (152mm) x 12" (304mm) BOYAR-SCHULTZ SURFACE GRINDER (13164) [13164]
  6" (152mm) x 12" (304mm) BOYAR-SCHULTZ SURFACE GRINDER (13165) [13165]

0I4806   INSPECTION EQPT.(Incl.e-beam & optical mics)See al
  PRATT & WHITNEY MODEL 10-A MAGNETIC CONTINUOUS GAGE FOR THICKNESS (6402) [6402]
  C-1 WIDTH GAGE, PRATT & WHITNEY, ELECTROLIMIT CONTINUOUS WIDTH GAGE (11993) [11993]
  C-1 WIDTH GAGE, PRATT & WHITNEY, ELECTROLIMIT CONTINUOUS WIDTH GAGE (11994) [11994]
  VBK 563 I/E/SU 2X20 MUBE/DAV VOLLMER CONTACT GAUGE WITH VMF1000/305 BASE (12633) [12633]
  ZUMBACH LASER MICROMETER W/2 PLANE DIA @ POSITION MONITOR (7849) [7849]
  VOLLMER MODEL VMF 3/90 CONTACT THICKNESS GAUGES (7341) [7341]

0L4304   LATHES, PRECISION, JEWELERS, TOOLROOM, Etc.
  5" x 12", SHELDON MODEL EL-38-B LATHE (11170) [11170]

0L6954   LEVELERS (ROLLER / PLATE & STRETCH)
  4-1/2" 4 HIGH 9 OVER 10 ROLL CONFIGURATION, 3/4HP (12574) [12574]
  7" (178mm) x 7/8" (22mm) KOHLER 19 ROLL LIGHT GAUGE STRIP LEVELER (12173) [12173]
  7" (178mm) x 7/8" (22mm) BRUDERER 19 ROLL BACKED UP LEVELER (12018) [12018]
  8" X 1 1/2", PERFECTO MODEL 28-8-7, 7 ROLL LEVELLER (11780) [11780]
  9" X 1-7/8" WATERBURY FARREL LEVELER 9 ROLL (11181) [11181]
  12" RUESCH 9 ROLL LEVELER ROLL CONFIGURATION 4 OVER 5, ENTRY GUIDE ROLLS (12794) [12794]
  34", UNGERER LEVELLER, BACKED UP, NO MOTOR (11271) [11271]
  42" HERR VOSS VLMB 17 ROLL 4-HI PRECISION LEVELER (13098) [13098]
  98" (2500mm) x 1.25" (32mm), RAU WILDAU, HOT PLATE LVLR, 80 KW, NEW ELC (13203) [13203]
  104" (2641mm), INNOCENTI BLANCH, MODEL A7L9R-2.5/6.5, 7 ROLL LEVELER (12535) [12535]
  118" (2997mm), FRORIEP, 7 ROLL LEVELER, 4 OVER 3, THICKNESS 1.182" (11975) [11975]
  124" x 1.57" SKET MODEL UBR 40X3150-7/12 PLATE LEVELER (11750) [11750]
  126" x 2", SKET, SPEED 9m/MIN, MIN THICKNESS 1/4", PLATE LEVELER (7751) [7751]
  126" x 2", SKET, SPEED 9m/MIN, MIN THICKNESS 1/4", PLATE LEVELER (7752) [7752]

0L7070   LEVELERS, TENSION
  17" (430mm) x .02" (.5mm), MCKAY, TENSION LEVELING LINE (13224) [13224]
  56" (1422mm) STAMCO-HUNTER TENSION LEVELER, THICK 0.050"-0.003" (13385) [13385]

0M4125   MOTORS, A.C., HORIZONTAL, 3 PHASE, 60 CYCLE
  75 HP, 1185 RPM, 460 V., EMERSON INDUCTION MOTOR, Frame 405T, (12863) [12863]

0P1050   PICKLING LINES
  50" (1346mm), SUMITOMO, (2000 Kg), 1970, PICKLING LINE STEEL STRIP (12273) [12273]

0P3880   PRESSES, COINING, MINT COINING
  360 Ton, HME, No. K360, COINING PRESS, 45 SPM, 2 3/8" STROKE (12140) [12140]

0P4425   PRESSES, EXTRUSION
  100 Ton, COLLIN, DOUBLE ACTING, 2 COLUMN, 50mm DIA X 120mm L BILLETS (12850) [12850]
  600 Ton, SIDDHARTH, OIL HYDRAULIC, 80mm/100mm X 450mm BILLET, New 2000 (12842) [12842]
  800 Ton, UBE, NEW 1979-UPDATE 2008, EXTRUSION PRESS (13073) [13073]
  1000 Ton, FIELDING, WATER HYDRAULIC VERTICAL EXTRUSION PRESS (12964) [12964]
  1250 Ton, LAKE ERIE, BILLET DIA 150mm, BILLET LENGTH 610mm (10044) [10044]
  1500 Ton, KOBEL CO, HYDRAULIC EXTRUSION PRESS, BILLET 6.9" X 32" (13212) [13212]
  1500 Ton, LOEWY, DIRECT OIL HYD, FOR BRASS ROD, 6-8"(203mm) DIA. BILLETS (12831) [12831]
  1800 Ton, LINDEMANN, OIL HYD EXT PRESS, REBUILT 2007, 7" (178mm) DIA (12995) [12995]
  1800 Ton, LOMBARD, EXT SPEED 1.5 - 38mm/sec. 150/203mm BILLET DIA (12457) [12457]
  1850 Ton, BALDWIN INNOCENTI, (Rebuilt 1999), ALUM EXT PRESS, 7" (178 mm) (12053) [12053]
  2000 Ton, SIDDHARTH, 1996, EXTRUSION PRESS FOR COPPER TUBE (10346) [10346]
  2000 Ton EXT PRESS FOR MAGNESIUM, (2 AVAILABLE), 6" (152mm) BILLET DIA.(13374) [13374]
  2000 TON WATSON STILLMAN WATER HYDRAULIC BRASS ROD EXTRUSION PRESS (13086) [13086]
  2500 Ton, CLECIM, ALUMINUM OIL HYDRAULIC HORIZONTAL EXTRUSION PRESS (13193) [13193]
  2600 Ton, IHI, EXT PRESS w/PIERCER, 11" (280mm) x 26" (660mm) BILLET (13341) [13341]
  2800 Ton, LOEWY, EXT PRESS w/PIERCER, 8"(207mm) x 26"(660mm) COPPER (13342) [13342]
  3000 TON, LAKE ERIE, 1970, OIL HYDRAULIC, ALUMINUM EXT PRESS, DIRECT (12159) [12159]
  3000 Ton, LOEWY, ALUMINUM EXTRUSION PRESS, REFURBISHED 2008, OIL HYD (13317) [13317]

0P4728   PRESSES, FORGING
  3000/4000 Ton, KOBE, Open Die Forging Press, 82" (2100mm) Stroke, (13216) [13261]

0P5102   PRESSES, HYDRAULIC
  150 Ton, PHI, 12"Str, 15"DLO, 4 POST HYDRAULIC PRESS (13071) [13071]
  200 Ton, MODERN, 4 1/2" (114mm) Str, 14 1/2" (368mm) DLO, 4 POST HOBBING PRESS [13070]
  300 Ton, LOUIS, 18"Str, 4 POST, COMPACTING TYPE, HYDRAULIC PRESS (13072) [13072]

0P5298   PRESSES, HYDRAULIC, STRAIGHTENING
  75 TON WATSON STILLMAN VERTICAL STRAIGHTENING PRESS (13092) [13092]

0P7198   PRESSES, STRAIGHT SIDE, SINGLE CRANK (Sgl. Action)
  2000 Ton, DANLY, SSSC PRESS (13024) [13024]

0R0997   RECOILERS
  2000 Lb., PROGRESSIVE, No. 620SM-RH,TRAVERSE TAKE UP (10579) [10579]
  TORRINGTON, 16" (406mm) DIA. x 17.5" (445mm) FACE DRUM, 15 HP, 1680 RPM (12528) [12528]
  3000 Lb., FENN, 24" X 10", CHAIN DRIVEN, MANUAL EXP (11705) [11705]
  10,000 Lb., PAXSON, 16" DIA. x 42" FACE DRUM, HYDRAULIC PUSHOFF [11871] [11871]
  10,000 Lb., RUESCH, 16" DIA. x 30" FACE DRUM, HYDRAULIC PUSHOFF [11869] [11869]
  15,000 LBS. (680 KG) (1066mm) Cap., 20" (508mm) DRUM, 20 HP, 240 V (12529) [12529]
  20,000 Lb. x 48", PAXSON, RECOILER, W/OVERARM SEPARATOR, 60 HP, HYD. (6583) [6583]
  20000 Lb., PAXSON, 16/20 ID W/SHOE PLATES, 40 HP DC (10609) [10609]

0R5603   ROLLS,PLATE BEND'G,INIT.& DBL.PINCH TYPE(Incl.Shee
  12' x 4", BERTSCH, No. 36, 14 Ft. x 4" Thick Bertsch Hydraulic Plate Bending Roll, 36" Roll Diameter, 300 HP, Max. Plate Thickness 6" @ 48" Wide or [11928]
  12' (3657mm) x 4 1/16" (103mm), BERTSCH, No. 36, 1978, PLATE BENDING (11928) [11928]

0R6448   ROLLING MILLS, BAR & ROD
  4" x 8" W., FIOA 2 HI ROD MILL, .325" TO .040" MOD. SQUARE (12651) [12651]
  5" (127mm) x 9" (228mm) W., STANDARD, 2-HI ROD MILL, (12945) [12945]
  6" x 12" W., STANDARD 2 HI ROD MILL, .875" TO .040" MOD. SQUARE (12650) [12650]
  7" x 2" W., WATERBURY FARREL, 10 STAND, .781"-.300" (19.8-7.62mm),Coiler (11357) [11357]
  8" x 10" W., LOMA, No. 1000, ROD/FLAT PRODUCT MILL (12428) [12428]
  8" (203mm) x 14" (355.6mm) W., WATERBURY FARREL, 15 HP, GROOVED ROLLS (13369) [13369]
  12" (305mm) x 28" (712mm) W., STANDARD, 2-HI ROD MILL, (12946) [12946]
  12" (305mm) x 36" (914mm) W., STANDARD, 2-HI ROD MILL, (12947) [12947]
  16" (406mm) x 24" (609mm) W., WATERBURY FARREL, 125 HP, 2-HI ROD MILL (13066) [13066]
  BUEHLER, 6 STAND TANDEM ROD MILL (12925) [12925]
  STANDARD, 6 STAND TANDEM, CAP. .425" - .110, 3 GROOOVES PER ROLL (12637) [12637]
  32 STAND, SUMITOMO, ROD MILL FOR STAINLESS 5.5mm-1.2mm (.216"- .048") (13357) [13357]
  9 STAND/15 PASS REBAR MANUFACTURING MILL INSTALATION (11895) [11895]
  REBAR MANUFACTURING LINE (NEW) [12144] [12144]
  HOT ROLLING MILL PLANT FOR ROUND BAR (12311) [12311]

0R7003   ROLLING MILLS, SENDZIMIR
  8 1/2" WATERBURY FARREL, No. ZR 15 8 1/2, SENDZIMIR ROLLING MILL (1610) [1610]
  8-1/2" WATERBURY FARREL, MDL ZR16-8 1/2, 30 HP DRIVE, 15 HP RCLRS (10019 [10018]
  ZR16 - 8 1/2 WATERBURY FARREL SENDZIMIR MILL (11212) [11212]
  8 1/2" (215mm) ZR16-8 1/2 WATERBURY FARREL SENDZIMIR, 0.020"-0.001" STAINLESS [12214]
  13" (406mm), SENDZIMIR, No. ZR33-13, 20-HI COLD REV (11622) [11622]
  14" (355.6mm) RUESCH SENDZIMIR, Z-HIGH,REVERSING ROLLING MILL (13287) [13287]
  20 ROLLS STRIP ROLLING MILL, 1978, (11803) [11803]
  18" (450mm), SENDZIMIR, No. ZR 16-18, 12-HI COLD REVERSING MILL (13239) [13239]
  25" SENDZIMIR ZR19-25, 12-HI REVERSING COLD ROLLING MILL,Stainless Stl (13051) [13051]
  32" (815mm), No. ZR-33C-32, 20-HI, COLD REVERSING, SENDZIMIR MILL (13134) [13134]
  37", WATERBURY FARREL, No. ZR23-37, 1969, (13128) [13128]
  48", HITACHI 20 HI SENDZIMIR MILL, MATERIAL: 4MM THICK X 1030MM WIDE (12399) [12399]
  ZR22 - 49 INNOCENTI SENDZIMIR 20 HIGH ROLLING MILL (11470) [11470]
  52" (1321mm), DMS, No. ZR22-BBS-52, 1992, 20-HI SENDZIMIR MILL (13334) [13334]

0R7045   ROLLING MILLS, 2-HI
  3" (76mm) Dia. x 5" W. (127mm), CAVALLIN, 2-HI ROLLING MILL, 220V AC (12976) [12976]
  3" X 5" STANAT MODEL FX-100 2 HI ROLLING MILL (12702) [12702]
  5" x 8", FENN, WITH RECOILERS REVERSING MILL (12797) [12797]
  5" (127mm) x 8" (203mm), STANDARD, 2-HI ROLLING MILL (12653) [12653]
  5 1/2" x 6", MARSHALL RICHARDS, 10 HP DC, WINDERS (11983) [11983]
  6" x 6", STANAT, HEATED ROLLS 2/4 ROLLING MILL 20 HP DC, HYD SCREWDOWN (12914) [12914]
  6" (152mm) x 6" (152mm), STANDARD, 2-HI ROLLING MILL, 10HP AC (13226) [13226]
  8" (204mm) X 8" (204mm) FENN 2 HIGH ROLLING MILL 20 HP DC (13364) [13364]
  10" (254mm) x 10" (254mm), FENN, MODEL 101, 2-HI ROLLING MILL (13356) [13356]
  10" x 12", WATERBURY FARREL, 30 HP DRIVE, INDIVIDUAL HAND LEVER SCRWDN (13189) [13189]
  12" (305mm) x 12", CANADIAN IRON, 2-HI HAND WHEEL ADJUSMENT, 50 HP AC (13225) [13225]
  12" x 14", CARL WEZEL, 1975, PRECISION, AGC, HYD. SCRWDN, VOLLMER (4228) [4228]
  13-3/4" (350mm) x 24" (610mm), MINO REVERSING, 67 Kw MOTOR, COILER 20 Kw (12905) [12905]
  14" x 9", SCHMITZ, BRONZE BRNGS, WATER COOLED ROLLS (12299) [12299]
  16" x 18", STANDARD, 75/100 HP, MOTORIZED SCREWDOWN (10675) [10675]
  18" (457mm) x 65" (1650mm), WEAN UNITED, 2-HI REV, 50 HP, 230 VAC (13104) [13104]
  20" (508mm) x 62" (1575mm), 2-HI COLD ROLLING MILL, 134HP/380V/3PH/50HZ (13310) [13310]
  22" (558mm) x 30" (762mm), BLISS, 2-HI REVERSING HOT MILL, 500 HP (13069) [13069]
  22" (558mm) x 33" (838mm), 2-HI TEMPER PASS MILL (13353) [13353]
  22" (558mm) x 40" (1016mm), LEWIS, 2 HI NON REVERSING, 200 HP, 600 FPM (13185) [13185]
  24" x 43" ACHENBACH, 1961/2011, 150 m/min, 0,40-4mm, 750mm coil width (13055) [13055]
  24" x 72", A GARRISON 2 HI ROLLING MILL, 300 HP (12404) [12404]
  25" (635mm) x 42" WATERBURY FARREL, 1969, STAINLESS STEEL 37" (939mm) W. (13129) [13129]
  26" (660mm) x 53" (1346mm), SACK, SKIN PASS 2-HI ROLLING MILL (12455) [12455]

0R7097   ROLLING MILLS, 2-HI, TANDEM
  12" x 8", STRILICH, 3 STAND TANDEM, 15 HP PER STAND (12413) [12413]

0R7240   ROLLING MILLS, 2/4-HI
  1 1/2" x 5" x 8" FENN, 10 HP AC, REVERSING (12649) [12649]
  4"(101mm) x 6"(152mm) STANAT TA-215, 2/4-HI ROLLING MILL, SET UP AS 2 HI (13314) [13314]
  4" (101mm) x 6" (152mm), STANAT, No. TA-215, 2/4 HIGH ROLLING MILL (13366) [13366]
  5" x 8", FENN, 2/4 HI, REVERSING WITH COILERS (12785) [12785]
  6" x 16" x 14, CARL WEZEL, 1978, 2/4 HI REVERSING (10780) [10780]

0R7604   ROLLING MILLS, 4-HI
  1 1/2" x 6" x 6", WATERBURY FARREL, CONTACT GAUGE, RECOILER (10019) [10019]
  1-7/8" X 8" X 8" FENN, DUAL HANDWHEEL SCREWDOWN, RCLR/PAYOFF MILL MOUNTED (6433) [6433]
  2 3/16" x 8" x 6", RUESCH, REVERSING 4 HI, COLD ROLLING MILL (13333) [13333]
  8" (203mm), RUESCH, 4-HI REVERSING ROLLING MILL (13332) [13332]
  3 1/2" (91mm) x 18 1/2" (470mm) x 24" (610mm), SCHLOEMANN MKW, 4-HI REV (13131) [13131]
  4" x 14" x 10" MORGAN, 75 HP DC, POWER SCREWDWN (10017) [10017]
  4 3/4" (120mm) x 22" (560mm) x 24" (610mm), UNITED, 4-HI ROLLING MLL (13308) [13308]
  5" x 10" x 10", STANAT, 25 HP DC, POWER SCREWDOWNS (10647) [10647]
  5" (127mm) x 14" (355mm) x 16" (406mm), LEWIS, 4-HI COLD ROLLING MILL (13060) [13060]
  5" (127mm) x 16" (406mm) x 14" (355mm), RUESCH 4 HIGH ROLLING MILL (13283) [13283]
  5 1/2" (140mm) x 12" (305mm) x 12 1/2" (317mm), ROBERTSON, 4-HI REV MILL (12476) [12476]
  5-1/2"(140mm)X12"(325mm)X24"(600mm), MINO Rev, 67 Kw MOTOR, COILER 18 Kw (12906) [12906]
  5 1/2" (140mm) x 14" (355mm) x 15" (380mm), FARMER NORTON, 1980, 4-HI (12960) [12960]
  5 1/2" x 15" x 12", FENN, 4-HI ROLLING MILL, NON REVERSING (12499) [12499]
  6 1/4"(158mm) x 10"(254mm) x 27"(686mm) x 32"(813mm) 6 HIGH ROLLING MILL (13371) [13371]
  6 1/2" (168mm) x 19 3/4" (500mm) x 20" (508mm), 1994, 4-HI REV MILL (13340) [13340]
  170mm x 400mm x 350mm SCHMITZ 4-HI ROLLING MILL (12980) [12980]
  7" (180mm) x 20" (508mm) x 22" (558mm), FARMER NORTON, 4-HI REV MILL (13132) [13132]
  7" (175mm) x 20" (610mm) x 25" (635mm) 4-HI REVERSING COLD FOIL w/AGC (13389) [13389]
  8"(200mm) x 18"(450mm) x 33 1/2"(850mm), HITACHI, 30 M/MIN SPEED (13241) [13241]
  8" x 18" x 45" x 50", KUNMING HEAVY, 6 HIGH ROLLING MILL (12928) [12928]
  9" (228mm) x 24" (610mm) x 24" (610mm), ONE WAY 4-HI MILL, 150 HP/460V (12176) [12176]
  12" x 29 1/2" x 20", UNITED,REVERSING, SPEED 1212 FPM, 800 HP (12602) [12602]
  13"(325mm) x 33 1/2"(850mm) x 35"(885mm) M & N 4-HI COLD REVERSING MILL (11535) [11535]
  16" x 32" x 43" ACHENBACH, 1974, 750mm STRIP WIDTH, 0,4-6mm (13056) [13056]
  16" x 39" x 48", SKODA, 1968, 1400kw DRIVE MOTOR, REVERSING MILL (11978) [11978]
  16" x 40" x 32", SKODA, THICKNESS 0.314"(8mm) INPUT COPPER (13216) [13216]
  18" x 36" x 32", WATERBURY FARREL, 2 STAND TANDEM 12mm INPUT (13393) [13393]
  20" (508mm) x 50" (1270mm) x 56" (1422mm) UNITED 4-HI REVERSING MILL (12174) [12174]
  QUARTO, STRIP ROLLING MILL (11802) [11802]

0R7650   ROLLING MILLS, 4-HI, TANDEM
  5" (130mm) x 15" (390mm) x 13" (340mm), FROHLING, 4 STAND 4-HI COLD (13026) [13026]

0S0653   SAWS, BAND, HORIZONTAL
  12" (305mm) x 12" (305mm), HEM 1000AH, HORIZONTAL BAND SAW (13210) [13210]

0S0690   SAWS, BAND, VERTICAL
  1" W. x 116" L., NORTH AMERICAN, VERTICAL BAND SAW, DRIVEN (11269) [11269]
  GROB MODEL 4V-18 VERTICAL BAND SAW, 28" X 24" TABLE (13264) [13264]
  GROB MODEL 4V-18 VERTICAL BAND SAW, 28" X 24" (13265) [13265]
  GROB MODEL 4V-24, VERTICAL BAND SAW (13262) [13262]

0S0805   SAWS, COLD & CARBIDE
  3" CIRCULAR TUBE CUT-OFF SAW, 3.14" O.D. TUBE DIA., 13.7" BLADE (5667) [5667]
  18" BLADE DIAMETER, LOMA, KE-3, CROSS CUT TYPE, 72" CROSS TRAVEL, (4720) [4720]

0S0825   SAWS, COLD & CARBIDE (NON-FERROUS)
  8 1/4" or 12 1/2" Blade, WAGNER, MODEL# 200 CUTOFF SAW (13094) [13094]

0S1504   SCALES
  110,000 Lb. (50 Tons), TRAYVOUS, No. TY50, 2002, TRUCK SCALE (12598) [12598]

0S1837   SCRAP WINDERS
  SCRAP BALLER, Power Driven, 19" (484mm) W. x 20" (508mm) Dia., 40HP (13256) [13256]

0S4128   SHEARS, REBAR & BAR
  HYDRAULIC SCRAP SHEAR FOR ROD, 1" (25mm) DIA. COPPER, 240 V/3 PH/60 HZ (12949) [12949]

0S5054   SHOT BLAST/PEENING, AIRLESS
  TUBE I.D. SHOTBLASTER FOR 2 1/4" (60mm) - 1/4" (6mm) TUBE (12601) [12601]

0S5456   SLITTING LINES
  8" x 3 1/4", WATERBURY FARREL, SLITTING LINE (10354) [10354]
  10" (254mm) x .0118" (.299mm) x 20,000# FROHLING SLITTING LINE (12021) [12021]
  10" x 4", RUESCH RING SLITTER, 7 1/2 HP, 220/440 VOLT (11770) [11770]
  10" x 2 5/8", WATERBURY FARREL, SLITTING LINE, (12069) [12069]
  9" x 2 1/2" NATIONAL STANDARD, 2000 LB. COILS, SLITTING LINE (12674) [12674]
  12" (305mm), FERRARA, 5 HEAD TRAVERSE WIND & SLITTING LINE (13302) [13302]
  12" (305mm) x 2-1/2" (63mm), NOBS, SLITTING LINE, .157" (4mm) Thk Cap. (13331) [13331]
  13" (330mm) x 1-1/4" (31mm) RUESCH SLITTING LINE (13061) [13061]
  12" (305mm) x 1-5/8" (42mm), RUESCH, No. 189, SLITTER (13215) [13215]
  12"x 2 1/2" RUESCH, No. 76, 2000 Lb. Coils, SLITTING LINE (12673) [12673]
  12"x 2 1/2" RUESCH, No. 76, 2000 Lb. Coils, SLITTING LINE (12673) [13035]
  12" (304mm) x 2.875" (73mm) RUESCH 149 SLITTING LINE, 2,500# COIL, 0.125" -.006" [11927]
  14" (355mm) x 3" (76mm), RUESCH, 149, 2,000 LBS. COILS, SLITTING LINE (13182) [13182]
  14" WATERBURY FARREL, MODEL 2, 7.5HP (12791) [12791]
  16" x .038", YODER, SLITTING LINE, UNC/REC, SCRAP CHOPPER (6205) [6205]
  16" (406mm) x 3 1/4" (82mm), SLITTING LINE (13176) [13176]
  18" (459mm) x 4 1/4" (108mm), STANAT, LOOP SLITTING LINE (12951) [12951]
  20" (508mm) x 3.75" (95mm) x 10,000 Lb. (4535 Kg), PAXSON, SLITTING LINE (12467) [12467]
  SUNDWIG, 500 STRIP SLITTING (11805) [11805]
  24"x 4-1/8", RUESCH, No. 146, THICKNESS RANGE 0.015" - 0.093" (10587) [10587]
  24" (609mm), RUESCH, No. 146, 6000 Lb Coils, SLITTING LINE (12672) [12672]
  24" x 4 1/8" RUESCH, No. 146, LOOPING PIT RING SLITTING LINE (12681) [12681]
  24" X 6 1/2" RUESCH SLITTING HEAD, 125 HP (10610) [10610]
  24" (610mm), RUESCH, PRECISION DOUBLE LOOP RING SLITTING LINE, 15000 LB. (13349) [13349]
  24" x 4.00", YODER, No. M-2 1/2, SLITTER HEAD, 10 HP AC, 1770 RPM (6617) [6617]
  30" (762mm) x 4-1/4" (108mm), TORRINGTON, SLITTING LINE (12430) [12430]
  36" X 5" LOOPCO, LOOPING, 15HP SLITTER, 16/20" RECOILER 50HP, COMPLETE (7179) [7179]
  36" x 5" Paxson, 20.000 Lb Coils, 3 Heads, (11230) [11230]
  36" (915mm) x 4 1/4" (108mm) x 10,000 LB. (4536 KG) PAXSON SLITTING LINE (11955) [11955]
  36", STANAT, No. S-5-36, 5" ARBOR, 900 FPM, UNC., SLITTER HEAD, SCRAP WINDER [7185]
  36" X 4" YODER, 10,000#, CAPACITY 36" WIDTH, 0.005"-.095" THICK (11295) [11295]
  36"(914mm) X 4.5" YODER M2, 10000# COIL WEIGHT, UNCLR & RCLR (6049) [6050]
  36" (915mm) x 4-1/2" (114mm) YODER SLITTER W/UNLR (NO RCLR) (7718) [7718]
  36" (915mm) x 5" (127mm), YODER, 15,000 LB. (6800 KG) UNCOILER, 40 HP (11458) [11458]
  36" (914mm), YODER, PREVIOUS THICKNESS RANGE 0.030"- 0.1" (.76mm-2.5mm) (13175) [13175]
  48" (1219mm) x 7.5" (190mm) BRANER/LOOPCO SLITTING LINE, 30,000# COILS, (12694) [12694]
  48" (1219mm) x 7.00" (178mm) x 25,000#, LEE WILSON, SLITTING LINE, UNC/REC [12243]
  50" (1270mm) x 6" (152mm) McKAY SLITTER, COIL ID ENTRY/EXIT 20", COIL OD 72" [12956]
  52" (1320mm) x 12" (304mm) HERR VOSS SLITTER, 40,000# COILS, 0.375" - 0.095" [12749]
  54" (1371mm), WEAN/PAXSON, 30,000# (13052) [13052]
  60" (1524mm) DELTA SLITTER, TWO HEADS 6" & 8" ARBOR, 40,000# COIL, 1/4" THICK [12554]
  60" X 9", EMAG SLITTING LINE, .3125" @ 55,000 PSI (12076) [12076]
  63" (1600mm), CAMERON TYPE 648 PAPER/FOIL SLITTING LINE (10220) [10220]

0S7748   STRAIGHTENERS, FLAT & SHAPE
  2 3/8"- 3/4" (20mm-60mm), ARBOGA VERKSTAD, 1995, BAR SHAPE STRAIGHTENER (13289) [13289]
  3 1/4" (82mm) - 3/4" (19mm), MEDART, 10 ROLL TWO PLANE BAR STRAIGHTENER (13294) [13294]
  4" (100mm) x 1" (25mm), MEDART, No. TPVC12-2, SHAPE STRAIGHTENER (13280) [13280]

0S8005   STRAIGHTENERS, TUBE & BAR
  3/8" TORRINGTON MODEL #1819, 12 ROLL 2-PLANE TUBE & ROD STRAIGHTENER (12302) [12302]
  7/8", MACKINTOSH HEMPHILL MODEL AY-HD 6 ROLL STRAIGHTENER (11982) [11982]
  5/8" (15.87mm), BRONX, MODEL BR00, TWO ROLL BAR STRAIGHENER (13240) [13240]
  FENN, SINGLE PLANE FEED/STRAIGHTENER (12886) [12886]
  1" MEDART No. OA BAR STRAIGHTENER (12312) [12312]
  1 1/8"(28mm)-1/4"(6mm) SHUSTER MOD. 3GRS 12 ROLL TWO PLANE STRAIGHTENER (13209) [13209]
  1 3/8" SQUARE MS, BIGWOOD MODEL RS 2 SECTION STRAIGHTENER (12462) [12462]
  1 5/8" (41mm), FASTENER ENGR, SB-1625, 5 ROLL IN LINE, WIRE/ROD PRE-STR (13295) [13295]
  2" (50mm), BLAW KNOX, MODEL MC, 6 ROLL ROTARY TUBE & BAR STRAIGHTENER (13107) [13107]
  50mm TUBE STRAIGHTENER (11809) [11809]
  2-1/4" - 3/8" BRONX TWO ROLL MODEL BR 4 ROD STRAIGHTENER (12556) [12556]
  2 3/8"- 3/4" (20mm-60mm), ARBOGA VERKSTAD, 1995, BAR SHAPE STRAIGHTENER (13269) [13269]
  2 1/2" (63mm), BRONX, HDT 2, 7 ROLL ROTARY TUBE STRAIGHENER (12692) [12692]
  2 1/2" (63mm) - 3/8" (9.5mm), SUTTON, No. 610, 6 ROLL ROTARY TUBE (13106) [13106]
  3", BIGWOOD, No. 1B, 1970, 7-ROLL TUBE & BAR STRAIGHTENER (11214) [11214]
  3 1/4" (82mm) - 3/4" (19mm), MEDART, 10 ROLL TWO PLANE BAR STRAIGHTENER (13281) [13281]
  4" (100mm) x 1" (25mm), MEDART, No. TPVC12-2, SHAPE STRAIGHTENER (13293) [13293]
  4 5/8" (117mm), SUTTON, No. 2-25, 5 ROLL ROTARY STRAIGHTENER (13271) [13271]
  4 3/4" (120mm), MANNESMANN, 7 ROLL TUBE/BAR STRAIGHTENER (13259) [13259]
  5" MAX. THK, SUTTON, No. 2B, TUBE STRAIGHTENER (10728) [10728]
  6" (152mm), SUTTON, 2B, 5 ROLL, TUBE 6", BAR 4" (101mm) TO 3/4" (19mm) (13272) [13272]
  6" (152mm), SUTTON, No. 2BC, 5-ROLL TUBE STRAIGHTENER, 4" (101") BARS (13268) [13268]
  6 1/2" (165mm), KIESERLING, 7 ROLL, TUBE STRAIGHTENER, 75 HP (13279) [13279]
  7 1/2" (190mm) - 2" (50mm), MEECO, No. 6, TWO ROLL BAR & TUBE ROTARY STR (13145) [13145]
  8" (203mm) Max., 8 ROLL ROTARY PIPE STRAIGHTENER, 2" (50mm) Min. Est., (13359) [13359]
  10" (250mm), MANNESMANN, 7 ROLL TUBE/BAR STRAIGHTENER (13260) [13260]
  170mm TUBE STRAIGHTENER (11807) [11807]

0S8305   STRETCHERS/STRAIGHTENERS_See also Specific Categor
  35 TON FARREL X 50 FT (50m) HYDRAULIC EXTRUSION STRETCHER (13326) [13326]
  200 TON RD WOOD STRETCH STRAIGHTENER & DETWISTER (13090) [13090]
  CUSTOM HYDRAULIC STRAIGHTENER (13093) [13093]

0S8650   SWAGERS
  5/16", TORRINGTON MODEL 111, 2 DIE SWAGER, 1/8" SOLIDS (13119) [13119]
  5/16", TORRINGTON MODEL 111F, 2 DIE ROTARY SWAGER, 1/8" SOLIDS (12836) [12836]
  7/16", TORRINGTON MODEL #2, 2 DIE ROTARY SWAGER, 3/16" SOLID, WW/C HEAD (12186) [12186]
  7/16", TORRINGTON MODEL #2, 2 DIE ROTARY SWAGER, 3/16" SOLIDS,W/C HEAD (12188) [12188]
  1/2" TORRINGTON MODEL 211 ROTARY SWAGERS, TABLE TOP MODEL, 3/16" SOLIDS (13016) [13016]
  1/2" (12mm), TORRINGTON MODEL 211, 2 DIE ROTARY SWAGER, TABLE TOP, 3/16" SOLID [13018]
  1/2", TORRINGTON, No. 211-SS, STATIONARY, CAP. 1/2" TUBE, 3/16" SOLID (11607) [11607]
  3/4" TORRINGTON 2 DIE MODEL 3, ROTARY, SOLIDS 3/8" (10250) [10250]
  3/4", TORRINGTON MODEL #3, 2 DIE SWAGER, CAP. 3/4" TUBE, 3/8" SOLIDS (10694) [10694]
  3/4" TORRINGTON 2 DIE MODEL 3, ROTARY, SOLIDS 3/8" (10250) [13311]
  7/8", TORRINGTON MODEL 312, 2 DIE ROTARY SWAGER, 3/8" SOLIDS (11586) [11586]
  7/8", TORRINGTON MODEL 312, 2 DIE ROTARY SWAGER, 3/8" SOLIDS, W/C HEAD (12198) [12198]
  7/8", TORRINGTON MODEL 312, 2 DIE ROTARY SWAGER, 3/8" SOLIDS, W/C HEAD (12201) [12201]
  7/8", TORRINGTON MODEL 312, 2 DIE ROTARY SWAGER, 3/8" SOLIDS, W/C HEAD (12202) [12202]
  7/8", TORRINGTON MODEL 312, 2 DIE ROTARY SWAGER, 3/8" SOLIDS, W/C HEAD (12204) [12204]
  7/8", TORRINGTON MODEL 312, 2 DIE ROTARY SWAGER, 3/8" SOLIDS, W/C HEAD (12205) [12205]
  7/8", TORRINGTON MODEL 312, 2 DIE ROTARY SWAGER, 3/8" SOLIDS, W/C HEAD (12206) [12206]
  7/8", TORRINGTON MODEL 312, 2 DIE ROTARY SWAGER, 3/8" SOLIDS, W/C HEAD (12208) [12208]
  7/8", TORRINGTON MODEL 312, 2 DIE ROTARY SWAGER, 3/8" SOLIDS [12290]
  7/8", TORRINGTON MODEL 312WJ, 2 DIE ROTARY SWAGER, 3/8" SOLIDS, W/C HEAD (12203) [12203]
  1", TORRINGTON MODEL 3 1/2, 2 DIE ROTARY SWAGING, 1/2" SOLIDS, W/C HEAD (12194) [12194]
  1", TORRINGTON MODEL 3 1/2, 2 DIE ROTARY SWAGER, 1/2" SOLIDS, W/C HEAD (12195) [12195]
  1", TORRINGTON MODEL 3 1/2, 2 DIE ROTARY SWAGER, 1/2" SOLIDS (12473) [12473]
  1 1/16", MITCHELL, HYDRA-PUSH 2-DIE HYD COILED ROD PUSH POINTER (13114) [13114]
  1 1/4" (31.75mm) Max., MITCHELL, 2-DIE, HYDRAULIC TUBE PUSH POINTER (12154) [12154]
  1 1/4" (31.75mm) Max., MITCHELL, SINGLE DIE, HYDRAULIC TUBE PUSH POINTER [12155] [12155]
  1 1/4" (31.75mm), STEVENS & BULLIVAN ROTARY, 2 1/2" (65mm) TUBE CAP (12605) [12605]
  1 1/2", ABBEY ETNA MODEL 1515 LONG DIE SWAGER, 3/4" SOLID (6239) [6239]
  1 1/2", ABBEY ETNA MODEL 1515, 2 DIE SWAGER W/FEED (6515) [6515]
  1 1/2", ABBEY ETNA MODEL 1515RA, 2 DIE, 15" LONG (11443) [11443]
  1 1/2" (38mm), ABBEY ETNA, No. 158, ROTARY SWAGER, 3/4" (19mm) SOLID, (13213) [13213]
  1 1/2", TORRINGTON MODEL 323, 2 DIE SWAGER, CAP. 1 1/2" TUBE, 1/2" SOLIDS (6548) [6548]
  1-1/2", TORRINGTON MODEL 323, 2 DIE SWAGER, SOLIDS 1/2" (5450) [5450]
  1 1/2", TORRINGTON MODEL 4318, 2 DIE ROTARY SWAGER (10583) [10583]
  1 1/2", AIR OPERATED SWAGER FEED, DOUBLE JAWS, RAMP LOADING & INDEXING (11248) [11248]
  1 3/4" (44mm), FENN, No. 3 1/2F, LONG DIE ROTARY SWAGER, 5HP/3PH/60HZ, (11697) [11697]
  1 3/4", FENN, No. 3 1/2F, 2 DIE, 10" DIE LENGTH (11710) [11710]
  1 3/4" (44.45mm) FENN 3F 2 DIE ROTARY SWAGER 5/8" (15.87mm) SOLIDS (13327) [13327]
  1 3/4" (44mm), FENN MODEL 3F-2, 2 DIE ROTARY SWAGER, 5/8" SOLIDS (13117) [13117]
  1 3/4" FENN, No. 3F-2, 2 Die, 5 HP, 1-3/4" Cap Tube, 5/8" Cap Solid Rod (13148) [13148]
  1 3/4", FENN MODEL 3F-2, 2 DIE ROTARY SWAGER, 5/8" SOLIDS (13367) [13367]
  1 3/4", STANDARD/FENN MODEL 3A-2, 2 DIE SWAGING MACHINE, 3/8" SOLID (12841) [12841]
  1 7/8" (47mm), FENN, "MODIFIED" MODEL 18H, HYDRAULIC SWAGER FEED (13007) [13007]
  2", FENN MODEL 4 1/2F-15", 2 DIE ROTARY SWAGER (11818) [11818]
  2", FENN MODEL 2H HYDROFORMER WITH HYDRAULIC PWR UNIT, 15/16" SOLIDS (13008) [13008]
  2", FENN MODEL 4 1/2F-15" LONG, 2 DIE SWAGER, CAP. 2" TUBE (10600) [10600]
  2", FENN MODEL 4 1/2F-15", 2 DIE ROTARY SWAGER (11819) [11819]
  2", MITCHELL, 12,500 LB., 1982, HYDRAULIC PUSH POINTER (11228) [11228]
  2", TORRINGTON MODEL #4, 2 DIE ROTARY SWAGER, 5/8" SOLIDS W/C HEAD (12197) [12197]
  1 5/8", TORRINGTON, No. 6, 7/8" Cap. Solid Rod, 5 HP (13149) [13149]
  2" TORRINGTON MODEL 4315, 15" LONG 2 DIE SWAGER, CAP. 2" TUBE (11216) [11216]
  2 1/8" (54mm), FENN, No. 4A, 2 DIE, SOLID CAPACITY 5/8", ROTARY SWAGER (12856) [12856]
  2 1/8", STANDARD/FENN 4A- 2 DIE, SOLIDS 5/8" (6805) [6805]
  2" FENN 4 1/2F, - 15" LONG 2 DIE ROTARY, RACK & PINION FEED (7288) [7288]
  2 1/4" (57mm) FENN MODEL 4F-4 DIE ROTARY SWAGER, 15/16" SOLIDS (13361) [13361]
  2 1/4", FENN MODEL 4FSA, STNRY DIE SWAGER, CAP 2 1/4" TUBE, 15/16" SOLIDS(10821) [10821]
  2 1/4", FENN MODEL 4FSA, STATIONARY DIE ALTERNATING BLOW, 15/16" SOLID (11693) [11693]
  2 1/4", FENN, 4FSA, STNRY DIE ALT BLOW SWAGER, TUBE 2-1/4", SOLID 15/16" (11977) [11977]
  2 1/4" (57mm), TORRINGTON MODEL 433, 2 DIE ROTARY SWAGER, 5/8" SOLID (13247) [13247]
  3 3/8" (85.7mm), FENN, No. 5 1/2F, LONG DIE SWAGER, 24" LONGEST TAPER (12833) [12833]
  3 1/2" (89mm) TORRINGTON No. 1047 2-DIE SWAGER, SOLIDS 1 1/4" (32mm) (13252) [13252]
  4 1/2" (114mm), FENN, No. 6F, 4 DIE ROTARY SWAGER, 2-1/4" (57mm) SOLID, NEW 2009 [13316]
  4 1/2", STEVENS & BULLIVANT MODEL 15CS, 2" SOLID CAPACITY (11717) [11717]
  6" (152mm), ABBEY ETNA, No. 618A, SOLIDS 3" (76mm), 4-DIE ROTARY SWAGER (12827) [12827]
  6", FENN, No. 8FS, 1965, SIMULTANEOUS BLOW, STATIONARY DIE SWAGER (4928) [4928]
  MITCHELL, 50,000 LB. 4 DIE HYDRAULIC PUSH POINTER (13324) [13324]
  MITCHELL 50,000 LB 4 DIE HYDRAULIC PUSH POINTER (13325) [13325]
  SWAGER FEED, AIR OVER OIL TYPE, ORIGINALLY MOUNTED ON A TORR 3 1/2 (12526) [12526]

0T2154   TESTERS, HARDNESS
  WILSON MODEL LL HARDNESS TESTER w/OPTICS (11199) [11199]

0T2520   THREAD ROLLERS
  NO. 6 THROUGH 5/16" (8mm) DIAMETER, HARTFORD MODEL 312 THREAD ROLLER (12838) [12838]

0T4535   TRANSFER MACHINES, ROTARY, TRUNION (HOR.& VERT.)
  NAMCO, No. RV6, CNC ROTARY TRANSFER MACHINE, NEW 2001 (11495) [11495]

0T5301   TRANSFORMERS, 3 PHASE, 60 CYCLE, DRY TYPE
  75 KVA, Pri 480 Sec 240 VOLTS, HEVI-DUTY GENERAL PURPOSE TRANSFORMER (12893) [12893]
  220 KVA, REX TRANSFORMER, Pri 460 Sec 460Y/266 Volts, 1500 lbs (12892) [12892]

0T6427   TUBE COILERS
  5/8" (16mm) - 1/4" (6.35mm) VAUGHN, TUBE LEVEL WIND LINE (11101) [11101]

0T6502   TUBE END FINISHING MACHINERY
  6 5/8" (142mm) Cap. CONTOR AUTO DOUBLE END PIPE BEVELING/CHAMFERING (13157) [13157]

0T6525   TUBE END FINISHING & CHAMFERING MACHINE
  4 1/2"(114.3mm) Cap, SMS MEER, No. RFA 14, TUBE CHAMFERING MACHINE (13278) [13278]

0T6554   TUBE END FORMING MACHINERY
  3/4" (19mm) - 1/8" (3mm) TORRINGTON No. 60 DOUBLE STROKE TUBE END FORMER (12776) [12776]
  1-1/2"Cap, VAILL, No. 6A, DOUBLE STROKE (11655) [11655]
  2" MITCHELL, No. PP512,TWO STATION RESERVOIR TUBE FORMING MACH 1991, (10397) [10397]
  MITCHELL MODEL 536 HYD VARIABLE WALL TUBE FORMING MACHINE (11395) [11395]
  3"Cap, FENN, No. 30-3, 1981, HYD., SINGLE STROKE, TUBE END FORMER (4869) [4869]

0T6730   TUBE FINNING MACHINERY
  CONFEX (CONFORM) FIN TUBE PRODUCTION LINE (12385) [12385]
  0.20" (5mm) - 0.5" (12.7mm) INNER GROOVE BLOCK, INVERTED VERTICAL, (13346) [13346]

0T6850   TUBE COILERS
  3/16" (4.75mm) - 1/2" (12.7mm), TUBE LEVEL WOUND COILER, COPPER OR ALUM (13345) [13345]

0T6855   TUBE MACHINERY (Cut Off)
  1 1/2", PINES, No. 15 DYNA CUT, 1974, (11582) [11582]
  1 3/4"- 1/8", BERTOLETTE, No. 315, TUBE CUTOFF LINE (6152) [6152]
  7" (177mm), MODERN, No. 6K, 1977, Tube Cutoff, 3/4"-7" OD x 1-1/2" Wall (12607) [12607]
16" (406mm), OLIVER, CUT-OFF SAW W/MAGAZINE LOADERS & RUNOUT TABLES (13328) [13328]
16" (406.4mm) OLIVER CUT-OFF SAW W/MAGAZINE LOADERS & RUN OUT-TABLES (13329) [13329]

0T7071   TUBE MACHINERY (Draw Blocks)
  60", FENN, No. 60-5, Vertical Spinner Block, 1980, 1"-0.2"(25-5mm) (13081) [13081]
  8", VERTICAL CAPILLARY TUBE DRAW BLOCK, 10 HP HYD DRIVE, .080"-.040" (1832) [1832]
  24", MARSHALL RICHARDS, Pull 2000 Lb. INVERTED, 2000 FPM, 7/16" DIA INPUT (8063) [8063]
  54" (1370mm), MARSHALL RICHARDS, H54T, Pull 22,046 Lb., 113 kW, HORIZ (12588) [12588]
  54" (1370mm), MARSHALL RICHARDS, No. H54T, 113 kW, HORIZONTAL BLOCK (12590) [12590]
  60" (1525mm) DEMAG SMS VERTICAL TUBE SPINNER BLOCK, 300 HP (10717) [10717]
  60" (1524mm), VAUGHN, No. 60-22-76 VERTICAL DROPOFF, 86" (2184mm) FACE (12286) [12286]
  84", FENN, HORZ DROP BLOCK, 500 FPM, COIL WT 500#, 400HP (11567) [11567]
  84" (2130mm), IHI, Pull 10,582 Lb., SPINNER BLOCK FOR COPPER TUBE, (13343) [13343]
  84", MANNESMANN DEMAG, No. 80TVC 2000, 1996, SPINNER BLOCK (10345) [10345]
  84" (2130mm), MORGAN, Pull 7,500 Lb., SPINNER BLOCK FOR COPPER TUBE, (13344) [13344]
  84", VAUGHN, No. 84-24-26, Pull 26502 Lb., 1981, SPINNER (11566) [11566]

0T7301   TUBE MACHINERY (Miscellaneous)
  SMIPACK, TUBE SHRINK WRAPPING MACHINE, 1/4" (6mm) - 7/8" (22mm) COIL (12604) [12604]
LOT TUBING RACKS AND CRADLES (13330) [13330]

0T8253   TUBE MILLS
  1" X .043", LIVERNOIS, HIGH FREQUENCY, 1/2" MINIMUM (7894) [7894]
  2" (50mm), AEF, COMPLETE WELDED TUBE MILL LINE (11846) [11846]
  2 1/2" (63.5mm) x .095" (2.41mm), YODER, M2, ERW TUBE MILL, R-L, 150 FPM (13109) [13109]
  3" (76mm) x .135" (3.5mm), URRUTIA, 2-1/2, TUBE MILL (NO WELDER/SHEAR) (11829) [11829]
  74" (1900mm) x 1" (25.4mm), TAIYUAN MINING, FRONT SWING SPIRAL PIPE MILL [13291]
  126" (3200mm) x 1.102" (28mm) AS SPIRAL TUBE MILL (13288) [13288]

0T8353   TUBE REDUCERS
  3" (75mm), MANNESMANN, No. 75 VMR, 1985, PILGER MILL, DC300KW (13273) [13273]
  3 1/2" (88.9mm), ALUMINUM PILGER MILL, PLC CONTROLS, 50 FT. ENTRY TUBE (13322) [13322]

0T8653   TUMBLING BARRELS
  TUMBLING BARREL OPENING 7 1/2" WIDE X 15" DEEP (13167) [13167]

0T9148   TURNSTILES
  24,000 Lb. (10.8 MT), PAXSON, TWO ARM POWER TURNSTILE, (11476) [11476]

0U4003   UNCOILERS
  2000 Lb., BERTOLETTE MODEL 2CP, DOUBLE END, AIR BRAKE (8171) [8171]
  2,500 Lb., COOPER WEYMOUTH, DOUBLE ARM UNCOILER (11387) [11387]
  2,500 Lb. (1134 KG), LITTELL, No. 25, NON-DRIVEN COIL PAYOFF (12950) [12950]
  4,000 Lb. x 10", ADS, DUAL-ARM UNCOILER, DUAL ARM-SWIVEL PAYOFF, (6585) [6585]
  4,000 Lb., LITTELL, No. 40-24, PAYOFF, 14"/18" I.D. x 24" WIDE (10799) [10799]
  5,000 Lb. (4536 Kg) x 12" (305mm), EGAN, No. 1482, UNCOILER, SINGLE Mdrl (12278) [12278]
  6000 Lb., REGAL MODEL 6000-185SRNP-ADB, 14"/20" MANDREL (8073) [8073]
  10,000 Lb. (4535 KG) x 12" (305mm), SMF, UNCLR, 25 HP DC, SINGLE MANDREL (12277) [12277]
  15,000 Lb. (6800 KG) x 48" (1220mm), MECON, MOTORIZED DUAL REEL UNCOILER (13173) [13173]
  15000 Lb., YODER, 16" ID X 42" W, SLIDING BASE (7787) [7787]
  20,000 Lb., B & K, UNCOILER (12625) [12625]
  20,000 Lb. (9072 Kg) x 48" (1220mm), LEWIS, UNCOILER, HYD EXP, [11751] [11751]
  20000 Lb., PAXSON, 14/16" ID, 5HP DC, (10608) [10608]
  30,000 Lb. (13,600 KG) x 72" (1828mm), AMERICAN STEEL, 1000, DRIVEN (13177) [13177]
  36,000 Lb. (16,329 Kg) x 48" (1220mm), LITTELL, POWER UNCOILER [12571] [12571]

0U5004   UPCOILERS
  3" X 14", RUESCH MODEL 141, 3 ROLL, 24" MAX COIL O.D., DC DRIVE MOTOR (8000) [8000]
  20" ARM, CARRIER ROLLS 2 5/8" DIA, BENDING ROLLS 4" DIA UPCOILER (12792) [12792]
  4" x 28", TORRINGTON, UPC., CARRIER 2 1/2" X 28" (113) [113]

0U5503   UPENDERS/DOWN-ENDERS
  8,000 Lb (3628 kg) ECONO SH 80 SK702, COIL 54"(1371mm)W 72"(1829mm)OD (13381) [13381]
  10,000 Lb., BUSHMAN, No. M9604, MECHANICAL UPENDER, 1-1/2 HP MOTOR (13136) [13136]
  20,000 Lb. (9072 Kg) x 52" (1320mm), SES, UPENDER (13234) [13234]
  20,000 Lb. (9072 Kg), No. 20000, ROTATING COIL UPENDER, 5 HP, DUAL CHAIN [13339]
  30,000 Lb. (13,600 Kg) x 48" (1220mm), BRADBURY, UPENDER/COIL CAR (13235) [13235]
  40,000 Lb. (18,144 KG), MATHEWS, HYDRAULIC, COIL UPENDER/DOWNENDER (11701) [11701]

0W0504   WASHING EQUIPMENT
  LEWIS, AUTOMATED ULTRASONIC PARTS WASHING LINE, FOR METALWORKING PARTS (13199) [13199]

0W1403   WELDERS, BUTT
  MICRO WELD, MODEL THD, BUTT WELDER, .5" - .125" (12mm-3mm) (13321) [13321]

0W3254   WELDERS, STRIP
  10" (254mm) x 0.125" (3.175mm) IRON BAY MODEL MP-22 COIL END JOINER (12639) [12639]

0W5002   WIRE MACHINERY, BULLBLOCKS
  12" MOSSBERG & GRANVILLE, SINGLE DIE, 5 HP AC (7032) [7032]
  12" VAUGHN MODEL 8SD VERTICAL BULLBLOCK, 10/13 HP (10536) [10536]
  15" (381mm) WIRE DRAWING BULL BLOCK (13230) [13230]
  20" (508mm) DTM-03-20 FASTENER ENGINEERING IN LINE WIRE DRAWER (13370) [13370]
  20", No. DA-03-2020, FASTENER ENGINEERING, VARIDRIVE, BLOCK DIA 20" (4989) [4989]
  20" FASTENER ENGINEERING, No. DTV-02-20S, BULL BLOCK (11930) [11930]
  20" FASTENER ENGINEERING, No. DTV-02-20, BULL BLOCK (11931) [11931]
  20" FASTENER ENGINEERING, No. DTM-03-20, BULL BLOCK (11934) [11934]
  20" MACBEE, No. SWBB20-3, BULL BLOCK (11935) [11935]
  20" MACBEE, No. SWDBB20-3, BULL BLOCK (11938) [11938]
  20" MACBEE, No. SWDBB20-2, BULL BLOCK (11941) [11941]
  20", RMG, No. 34-05132-75, IN-LINE WIRE DRAWER, CAP 0.250" - 0.187" (10006) [10006]
  22" (559mm) SHOWA SINGLE DIE BULL BLOCK 10 HP VFD DRIVE (13298) [13298]
  22" (559mm) VAUGHN DOUBLE DECK BULL BLOCK 30 HP VFD DRIVE (13299) [13299]
  24" (610mm), VAUGHN, DUAL BLOCK SYSTEM FOR WIRE SHAVING, 50/60HP, 230V (13276) [13276]
  28" (711mm), DTI, IN LINE WIRE DRAWER 0.375" - 0.437" (9.5-11mm) (13380) [13380]
  36" LAMNEA BRUK INVERTED WIRE DRAWING BULLBLOCK, 250 HP, (12874) [12874]
  36" (914mm) MORGAN MODEL 16,DOUBLE DECK BULL BLOCK, 200 HP DC (13292) [13292]
  36", VAUGHN MODEL #22SD WIRE DRAW BULLBLOCK, 125/150 HP (12108) [12108]
  42" (1067mm), VAUGHN, 150 HP, .300"- 1" CARBON STEEL, PUSH-UP BLOCK (13307) [13307]
  44" (1117mm), FASTENER ENGINER, PJC-2520-584-44, 1" CAPACITY, 2-32 FPM (13172) [13172]
  46" (1168mm), MORGAN, No. 105, BULL BLOCK, HORIZONTAL, 15" (381mm) W., (13296) [13296]
  48" (1219mm), VAUGHN, 200 HP, 0.70"-1.625" CARBON STEEL, PUSH-UP BLOCK (13305) [13305]
  36" (915mm), MACBEE, DOUBLE BLOCK WIRE DRAWING LINE W/PAYOFF & TAKE-UP (13207) [13207]
  PITTINI DOUBLE DECK WIRE DRAWER, 29.5" (750mm) BLOCK DIA., 440V AC (13376) [13376]
  .314" (8mm), RMG No. 45-0574-01, 5 HP, WIRE DRAWER (12454) [12454]

0W5240   WIRE MACHINERY, CONTINUOUS POINTERS (PRE-DRAW)
  MORGAN MODEL 250, 2 ROLL CONTINUOUS POINTER (10604) [10604]
  1/4" MORGAN MODEL 250 CONTINUOUS ROLL POINTER (10696) [10696]
  1/4", MORGAN MODEL 500 CONTINUOUS WIRE POINTER, 9 GROOVES, 1/16" MIN (11159) [11159]
  1/4", MORGAN MODEL 500 CONTINUOUS WIRE POINTER, 9 GROOVES, 1/16" MIN (11160) [11160]
  1/4", MORGAN MODEL 500 CONTINUOUS WIRE POINTER, 9 GROOVES, 1/16" MIN (11176) [11176]
  3/8" MODEL 1-A VAUGHN CONTINUOUS WIRE ROLL POINTER (10695) [10695]
  VAUGHN, No. 1, DIE STRINGER, 0.375" COPPER/AL, .250" HC STEEL (13214) [13214]
  VAUGHN, CONTINUOUS ROLL POINTER, 0.375" - 0.058" (13245) [13245]
  VAUGHN, 14 GROOVE ROLL POINTER, 0,218" MAX DIAMETER (13246) [13246]
  1/4", WATERBURY FARREL CONTINUOUS WIRE POINTER (11149) [11149]

0W5548   WIRE MACHINERY, DRAWERS
  1F WM 835 MACBEE 8 DIE WET TYEP WIRE DRAWER (12997) [12997]
  No. 5/6 HRD, VAUGHN, MOTOBLOX, .280"- .060" (7mm-1.5mm), 5 BLOCK, 6 DIE (13277) [13277]
  5HR, VAUGHN MOTOBLOX, 15 HP DC PER BLK, 16" INT MED BLKS 22 FINISH (5366) [5366]
  .220"- .030", No. 6HIV, VAUGHN WIRE DRAWER, 10 HP, 230 V DC, (6848) [6848]
  .218"- .030", No. 6HIV, VAUGHN WIRE DRAWER, 6 DIE, 6 BLOCK, 10HP/BLOCK (6850) [6850]
  BB-14, FENN, 0.187"-0.25", 6 BLOCK 14" DIA. BLOCKS (11186) [11186]
  NIEHOFF, M5.4.5A.F31, 1997, FINE WIRE DRAWER, .023"(.6mm) - .002"(.18mm)(13233) [13233]
  TF111B, HERBORN, .040" HI CARBON FINE WIRE DRAWER (11859) [11859]
  TF111C/13, HERBORN, 0.040" HI CARBON 13 DIE (11857) [11857]
  TF111C/13, HERBORN, 0.040" HI CARBON 13 DIE (11858) [11858]
  BARCRO 10-DIE COLD WIRE DRAWING LINE, 17.7" (450mm) DIA. BLOCK, (13375) [13375]
  BREITENBACH 14-DIE WIRE DRAWING LINE, 17.7" (450mm) BLOCK DIA. (13377) [13377]
  5 BLOCK MORGAN, 16" DIAMETER BLOCKS, 25 HP (10184) [10184]
  5/8" - 3/8" (16mm - 9.5mm), RMG, WIRE DRAWING LINE, STEEL WIRE (12668) [12668]

0W5604   WIRE MACHINERY, DRAWERS, STRAIGHTENERS & CUTTERS
  No. 0, SCHUMAG, DRAW SPEED 30m/min, 2 - 7.5mm DIA. SOLID (12460) [12460]
  1-1/2"-1/2" (40-12mm), DANIELI CDM 40, COMBINED DRAW FOR SQUARES & HEXES (13275) [13275]
  No. KZ-P-1S, SCHUMAG, 1967, FOR TUBES, 6-28mm, 55 kW (12595) [12595]
  No. KZ-P-IS, SCHUMAG, 1965, FOR TUBES, 4-25mm, 55 kW (12593) [12593]
  No. KZ-R-IS, SCHUMAG, 1965, FOR TUBES, 4-22mm, 37 kW (12592) [12592]
  No. KZ-R-P1, SCHUMAG, 1980, FOR TUBES, 6-28mm, 55 kW (12594) [12594]
  KZP-2, SCHUMAG, 1957, WORKING RANGE 9-24mm, HEX 8-22mm (11914) [11914]
  No. KZR-II, SCHUMAG, 1997, COMBINED STRAIGHTEN AND CUT MACHINE (12469) [12469]
  STRAIGHTENING/POLISHING UNIT FOR SCHUMAG No. KZRP-I COMBINED DRAWING M/C (5353) [5353]
  No. P-IB/5, SCHUMAG, 1980, FOR TUBES, 6-28mm, 55 kW (12596) [12596]
  SCHUMAG, MODEL RFS, HIGH SPEED FINISHING LINE (10731) [10731]
  1-1/8" (28.57mm), SCHUMAG, TUBE FINISH LINE CUT-TO-LENGTH AND COIL (11497) [11497]
  2 1/4"- 1 1/4" (58mm-32mm), SCHUMAG, CASCADE TUBE DRAWING LINE, (13351) [13351]
  10mm-32mm (0.40"- 1.25"), ZDAS, STEEL BAR COMBINED DRAWING, HEAVY DUTY (12901) [12901]

0W5854   WIRE MACHINERY, FLATTENING MILLS
  2 3/4" x 2" 2 HI ROLLING MILL, 3 HP AC GEARMOTOR (7403) [7403]
  4" x 1", ACCURATE WIRE, WIRE FLATTENING LINE WITH TRAV SPOOLER (11852) [11852]
  3/4" x 4" x 2" BHS-TORIN 2/4 HI, BACK UP ROLL DRIVEN, HYD SCRDWN (11722) [11722]
  6" x 1 1/2", STANAT 2 HI WIRE FLATTENING MILL, 15 HP DC (12317) [12317]
  6" x 1 1/2", STANAT 2 HI WIRE FLATTENING MILL, 15 HP DC (12319) [12319]
  6" x 2-1/2", STANAT 2 HI/4HI WIRE FLATTENING MILL (12314) [12314]
  6" X 3 1/2" TISHKEN MDL STR-30-002-HWA, FLATTENING & CUT OFF (10429) [10429]
  6" X 3 1/2" TISHKEN MODEL STR30-C0-2HW WIRE FLATTENING AND CUT OFF (10421) [10421]
  6" x 4" (152mm x 101mm), STANAT MODEL TTA-400, 2-HI WIRE FLATTENING MILL (12318) [12318]
  6" x 4", STANAT, W/STRAIGHTENER, PAYOFF, TAKE-UP, VARI-SPEED (7144) [7144]
  6" x 4" TISHKEN 2 STAND MDL ST2-C02 WIRE SAHPING & CUT OFF LINE (7334) [7334]
  8" x 2", FENN 2 HI WIRE FLATTENING MILL, 75 HP HP, CARBIDE SHELL ROLLS (12010) [12010]
  8" x 6", FENN, No. 083, 2-HI COLD ROLLING MILL (8183) [8183]
  8" x 6", FENN, TWO STAND TANDEM 8,8 WITH TRAVERSE WINDER (12515) [12515]
  8" x 6", FENN, 3 STAND TANDEM 8,6,6, TRAVERSE TAKE UP (12514) [12514]
  10" (254mm) x 2" (50mm) FENN 2 HI WIRE FLATTENING, 75HP DC, CARBIDE SHELL ROLLS [12009]
  11" x 4 1/2", TISHKEN, No. STR-FLS-2, WIRE FLATTEN, STR & CUT-OFF LINE (12450) [12450]
  MINO ROLLING MILL (11806) [11806]

0W6153   WIRE MACHINERY, PAYOFFS
  FASTENER ENGINEERING, MODEL PF-2500-08 COIL OPENER/PAYOFF (10990) [10990]
  WATERBURY FARREL, No. AV-40, 1970, POWER DRIVEN, UNCOILER (11286) [11286]

0W6356   WIRE MACHINERY, SPOOLERS
  HUESTIS, WIRE RESPOOLING LINE (12811) [12811]
  500 LB, RUESCH MODEL 271 TRAVERSING TAKE UP REEL, 4 1/2" TRAVERSE (8001) [8001]
  1000 LB, STANAT TRAVERSING TAKE UP REEL [12334]
  500 lb, TRAVERSING TAKE UP REEL (12424) [12424]

0W6753   WIRE MACHINERY, STRAIGHTENERS
  WELLS, No. 5N, STRAIGHTENER, CAPACITY 1/4" - .097" (5689) [5689]
  5/16"(7.9mm), SHUSTER, Model 26SFT, WIRE STRAIGHTENER, CAP. 0.093" - 0.312" [13300]
  .093" - .312" (2.36mm - 7.9mm), SHUSTER-METTLER, 26SFT WIRE STRAIGHTENER (13192) [13192]
  1 1/4", VAUGHN 3 ROLL ROD STRAIGHTENER, 1 1/4" MEDIUM CARBON (6215) [6215]

0W6804   WIRE MACHINERY, STRAIGHTENERS & CUT-OFFS
  1/8", LEWIS, No. 7-D, WIRE STRAIGHTEN & CUT-OFF LINE [12620]
  1/4", SHUSTER No. 1AV5, WIRE STRAIGHTEN & CUT-OFF LINE, 20-200 FPM [12622]
  1/4" (6.35mm), SHUSTER No. 1AVS-5, WIRE STRAIGHTEN & CUT-OFF LINE (12621) [12621]
  3/8"- 5/32", LEWIS, No. 8-FA, WIRE STRAIGHTEN & CUTOFF (11816) [11816]
  1/2"- 1/4", LEWIS, No. 9-FHA, WIRE STRAIGHTENING & CUTOFF (11817) [11817]
  3/8" - 5/8", LEWIS, No. 10-F, STRAIGHTEN & CUT MACHINE, 40 HP MOTOR (13135) [13135]
  3/16" - 5/8" , LEWIS, No. 10-F, WIRE STRAIGHTEN & CUT MACHINE (13141) [13141]
  5/8" (15.8mm), SHUSTER, 4AV, 12' CUT LENGTH, STATIONARY CUT OFF (13174) [13174]
  1/2" - 3/4", LEWIS, No. 11FA, STRAIGHTEN & CUT MACHINE (13137) [13137]
  3/4", LEWIS, No. 11FHA, 1980, TRAVEL CUT WIRE STRAIGHTENER & CUT MACHINE (13138) [13138]
  .080" LEWIS MODEL 0 WIRE STRAIGHTEN AND CUT MACHINE (12256) [12256]

0W7154   WIRE MACHINERY, TAKE-UPS
  12" TRAVERSE CONNECTICUT WIRE TRAVERSE TAKE-UP FLAT AND ROUND WIRE (10839) [10839]
  12" TRAVERSE CONNECTICUT WIRE, TRAVERSING SPOOL/WIRE TAKE-UP (10779) [10779]
  FENN, HYDRAULIC TRAVERSE TAKE-UP (11602) [11602]
  FENN HYDRAULIC TRAVERSE TAKE-UP (11604) [11604]
  1,000 LBS STEEL HEDDLE, TRAVERSE WINDER 14" TRAVERSE (12220) [12220]

0W7275   WIRE MACHINERY, TURKS HEAD
  MODEL 102PD FENN POWER DRIVEN TURKSHEAD (11676) [11676]
  No. 165C, BHS-TORIN, COMBINATION TURKS HEAD (8006) [8006]
  MODEL 3P, FENN PLAIN TYPE HIGH SPEED TURKSHEAD (12324) [12324]
  MODEL 3P, FENN PLAIN TYPE HIGH SPEED TURKSHEAD (12328) [12328]
  MODEL 3P, FENN PLAIN TYPE HIGH SPEED TURKSHEAD, MISSING 1 ROLL BOX ASSY (12329) [12329]
  MODEL 3P, FENN PLAIN TYPE HIGH SPEED TURKSHEAD (12418) [12418]
  MODEL 3U, UNIVERSAL STANDARD/FENN STANDARD SPEED TURKSHEAD (12050) [12050]
  MODEL 4P, FENN PLAIN TYPE, STANDARD SPEED, FRICTION TURKSHEAD (11356) [11356]
  4P FENN TURKS HEAD (11771) [11771]
  No. 4P, FENN HOUSINGS (12771) [12771]
  5TH, FENN, COMBINATION TYPE, .437" (11mm) MAX SQUARE, TURKSHEAD (12017) [12017]
  MODEL 5U, FENN UNIVERSAL TYPE TURKSHEAD, .437" MAX SQUARE (11672) [11672]
  MODEL 5U, FENN UNIVERSAL TYPE TURKSHEAD, .437" MAX SQUARE (11674) [11674]
  MODEL 5U, FENN UNIVERSAL TYPE TURKSHEAD, .437" MAX SQUARE (11673) [11673]
  FENN, No. 61, POWER DRIVEN TURK HEAD (12511) [12511]
  FENN/STANDARD MODEL 81P POWER-DRIVEN TURKS HEAD (5788) [5788]
  WIRE SHAPING LINE WITH DANCER AND WIRE TRAVERSE TAKE UP (12310) [12310]
  28" FENN STYLE TURKS HEAD CAPSTAN, 30 HP DC, (5951) [5951]
  2P PLAIN STYLE TURKS HEAD (12146) [12146]
  24", DOUBLE CAPSTAN, 2" WIDE FACE WIDTH, 5 HP EDDY CURRENT CLUTCH DRIVE (11713) [11713]

0Z9001   EQUIPMENT WANTED
  MACHINES WANTED (13301) [13301]

Please complete the form below so we have accurate contact information to give your request the consideration it deserves. At the minimum, we need company name, your name, and your email address.

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?

Please enter text from above:

 |  Machinery International Corporation  |  Contact Us  |  Email Sales Department  |  203.484.0400  | 

RETURN